Electrical Foreman (Submarines)

Austal USA

Mobile (AL)

On-site

USD 90,000 - 130,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

N/A

Job summary

Austal USA is seeking an Electrical Manager to oversee electrical installation on vessels under construction and to monitor production schedules with Supervisors. You will ensure QA and safety compliance, maintain material take-offs, and manage resources and subcontractors to meet milestones.

You will provide input at weekly production meetings on schedule status, performance, morale, safety, and cost/weight savings, while ensuring timesheets are processed daily and policies are followed.

Qualifications

  • At least 5 years electrical experience in marine/manufacturing industry.
  • Display a good working knowledge of planning and monitoring.
  • Ability to work under pressure and manage people.
  • Demonstrates sound knowledge of Class/ Flag requirements.
  • Extensive experience in Marine AC and DC system, control and automation, with troubleshooting and commissioning.

Responsibilities

  • Personally oversee electrical installation on vessels under construction.
  • Prepare material take-offs and maintain stock levels.
  • Enforce Austal Quality Assurance Standards and Class/Flag requirements.
  • Coordinate with Supervisors and outside contractors; allocate resources.
  • Present weekly at production meetings on schedule status, performance, morale, safety and cost savings.
  • Process timesheets daily and ensure proper record-keeping.
  • Provide guidance on pay rates, succession planning, and training programs.

Skills

Electrical leadership
Planning & monitoring
Supervisory experience
Communication
Class/Flag knowledge

Education

High School Diploma/GED

Job description

REPORTS TO: Electrical Manager
SUPERVISES: Electrical Supervisor(s)
AUTHORITIES / RESPONSIBILITIES:

Responsible for the implementation of all production schedules, monitoring and maintenance of schedules in conjunction with Supervisors. Oversees electrical installation on vessels under construction. Responsible for the preparation of material take-offs. Responsible for the monitoring and maintenance of adequate stock levels. Ensuring correct construction procedures are adhered to in compliance with Austal Quality Assurance Standards and Class/ Flag requirements. Responsible for sourcing and distributing information and direction to Supervisors and outside contractors. Accountable for monitoring resource levels and the distribution of these resources. Assisting with maintaining safe working practices and good housekeeping in all areas and ensuring Austal’s Safety Policies and regulations are followed. Accountable for ensuring that all supervisors under their control are complying to the ten fundamental rules of supervision.

Provide input on a weekly basis at production meetings regarding:

  • Schedule status of assigned tasks
  • Performance status of assigned tasks
  • morale
  • safety
  • product improvement
  • cost savings
  • weight savings
  • milestone achievement

Ensure all timesheets are processed and allocated daily.

Ensure that company policies and procedures are understood and followed, particularly in relation to:

  • Health and Safety
  • Quality Assurance

Provide motivation, maintain morale and minimize confrontation. Review and recommend on pay rates in conjunction with supervisors. Maintain succession plan. Identify key personnel and implement training programs. Input and maintain cost savings, weight savings, and production improvements.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:
  • High School Diploma/GED
  • At least 5 years electrical experience in marine or manufacturing industry required
  • Display a good working knowledge of planning and monitoring.
  • Ability to work under pressure
  • Excellent people management skills
  • Demonstrate previous supervisory skills
  • Ability to effectively communicate with other departments and within own department
  • Demonstrates sound knowledge of Class/ Flag requirements
  • Able to prioritize workload and effectively control various projects under construction concurrently
  • Ability to plan to a set schedule and budget, make decisions, problem solve, work to deadlines, and control a substantial workforce
  • Extensive experience in Marine AC and DC system, control and automation. Experience in troubleshooting, testing and commissioning AC and DC systems.
TOOLS:

N/A

DIRECTION EXERCISED:

Authority to assign work to employees

DISCRETION EXERCISED:

Discretionary authority to correct, discipline and recommend pay increases

LIAISES WITH:

Liaise with other trade Managers, Coordinators, Supervisors and any outside contract firms as required.

ADDITIONAL GUIDELINES:
  • 18 years of age or older at time of application
  • Able to provide proof of US Person Status
  • No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
  • No felony convictions of Drug crimes within three years from disposition date
  • Willing to submit to a drug screen
  • Willing to submit to a background check
PHYSICAL DEMANDS:
  • Must be able to tour all vessels and work sites.
  • While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear.
  • The employee is occasionally required to sit.
  • Specific physical requirements include the following: Must have the ability to bend, squat, stoop, crawl, and kneel.
  • Perform prolonged standing.
  • Ability to turn head from side to side and about the vertical axis.
  • Ability to turn body at the waist from side to side and about the vertical axis.
  • Lift/push/pull 50lbs to 75lbs on an occasional basis.
  • Lift/push/pull up to 20lbs on a frequent basis.
  • Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
  • Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts.
  • Able to work at a variety of levels (ex. waist, eye, overhead).
  • Demonstrate the ability to safely and appropriately use required tools and equipment.
  • Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
  • Possess sufficient handgrip and coordination to carry and operate tools and equipment.
  • Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
  • Ability to withstand cold and hot temperatures.
  • Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time.
  • Able to respond to verbal and audible sounds/commands.
  • Able to utilize adequate visual skills.
  • Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
  • Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud.

SAFETY:

Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

EQUAL EMPLOYMENT COMMITMENT:

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932. Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion. Austal USA is a ship manufacturer headquartered in Mobile, Ala., with service centers in San Diego and Singapore and a technology center in Charlottesville, Va. With the most modern steel panel line in the shipbuilding industry, Austal USA’s facility is capable of supporting the manufacture of both aluminum and steel ships. Austal USA leverages a moving module production line and strict adherence to lean manufacturing principles to consistently deliver on-schedule and on-budget. Austal USA is currently under contract for several programs, including the U.S. Coast Guard’s Heritage-class Offshore Patrol Cutter (OPC), the TAGOS-25 ocean surveillance ships, the Spearhead-class Expeditionary Fast Transport (EPF), the Navajo-class Towing, Salvage and Rescue ships (T-ATS), the Expeditionary Medical Ship (EMS), the Auxiliary Floating Dry Dock Medium (AFDM), and the Independence-variant Littoral Combat Ship (LCS), and is supporting Navy unmanned vessel programs leveraging its advanced machinery control system. Austal USA’s service business provides global support to U.S. Navy, Military Sealift Command and other customers. Austal USA’s San Diego Service Center includes a waterfront facility that will have the capability to drydock small combatants and similar sized ships. Earning 23 safety excellence awards, Austal USA continues to be one of the safest shipyards in America.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrical Designer IV
Electrical Designer IV

Austal USA • Mobile (AL)

On-site
USD 90,000 - 120,000
A Class Outside Machinist - SDCA
A Class Outside Machinist - SDCA

Austal USA • San Diego (CA)

On-site
USD 76,000 - 102,000
Quality Trades Support
Quality Trades Support

Austal USA LLC • Mobile (AL)

On-site
USD 52,000 - 64,000
Technical Training and Testing Instructor - Structural Welding EB (Weekend Shift)
Technical Training and Testing Instructor - Structural Welding EB (Weekend Shift)

Austal USA LLC • Mobile (AL)

On-site
USD 65,000 - 90,000
Mechanical Design Lead - Fitout
Mechanical Design Lead - Fitout

Austal USA LLC • Mobile (AL)

On-site
USD 90,000 - 140,000
Electrical Field Engineer III
Electrical Field Engineer III

Austal USA • Mobile (AL)

On-site
USD 100,000 - 140,000
Technical Training and Testing Instructor - Fitout EB (Day Shift)
Technical Training and Testing Instructor - Fitout EB (Day Shift)

Austal USA LLC • Mobile (AL)

On-site
USD 60,000 - 90,000
Technical Training and Testing Instructor - Structural Welding EB (Day Shift)
Technical Training and Testing Instructor - Structural Welding EB (Day Shift)

Austal USA LLC • Mobile (AL)

On-site
USD 60,000 - 85,000
Production Lead - AAT
Production Lead - AAT

Austal USA • Danville (VA)

On-site
USD 90,000 - 120,000
Mechanical Engineering Intern
Mechanical Engineering Intern

Austal USA • Mobile (AL)

On-site
USD 21,000 - 30,000