Electrical Engineering Technician

Robotics and AI Institute

Cambridge (MA)

On-site

USD 126,000 - 234,000

Full time

12 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Annual bonus
Long-term incentive
Cell phone reimbursement
Commuter subsidy
Medical benefits

Job summary

Robotics and AI Institute in Cambridge, MA seeks an experienced technician to build, test, and repair complex electrical and electromechanical hardware. You will assemble robot subsystems, PCBs, and cable harnesses, inspect solder joints, and support bench testing and on-robot diagnostics.

Applicants should have 5+ years of hands-on hardware experience, strong schematic literacy, and the ability to document build processes clearly. A strong safety mindset and relevant training are essential.

Qualifications

  • 5+ years of relevant professional experience, or equivalent demonstrated experience building, reworking, and troubleshooting complex electrical and electromechanical hardware.
  • Soldering and rework of small surface-mount components under a microscope, through-hole components, and larger components requiring controlled heating.
  • Experience fabricating cable harnesses for moving assemblies and integrating electrical and mechanical components using assembly drawings.
  • Ability to read electrical schematics, wiring diagrams, pinouts, assembly drawings, and build instructions, and identify discrepancies before proceeding.
  • Methodical troubleshooting using multimeters, oscilloscopes, power supplies, and related test equipment; distinguish symptoms from causes.
  • Experience safely assembling, testing, and servicing electrical systems with hazardous voltages and stored energy.
  • Working knowledge of electrical fundamentals, ESD precautions, safe power-up, and workmanship inspection with clear documentation.

Responsibilities

  • Teach engineers, researchers, and technicians safe assembly, rework, and troubleshooting through hands-on demonstrations.
  • Assemble robot subsystems, PCBs, and cable harnesses with proper routing and shielding.
  • Inspect and rework electronics using microscopes and soldering tools; verify completed repairs.
  • Support initial power-up, bench testing, and on-robot troubleshooting; document findings.
  • Help establish electrical safe-work procedures and maintain their documentation and implementation.
  • Create and maintain build instructions, wiring records, and test results; support transfer to external manufacturers for low-volume production.
  • Participate in design reviews and feed repair experience back into designs to improve buildability.

Skills

Electrical hardware
Soldering under microscope
PCB assembly
Diagnostics

Education

Associate degree or technical training

Tools

Oscilloscopes
Logic analyzers
Python scripting
DMMs / test gear

Job description

Our Mission

Our mission is to solve the most important and fundamental challenges in AI and Robotics to enable future generations of intelligent machines that will help us all live better lives.

At the Robotics and AI Institute, we blend the visionary thinking often reserved for academic settings with the disciplined teamwork and robust resources typical of top-tier industry teams, turning ambitious ideas into reality. We need people who are comfortable working between academia and industry and excited to build some hardware.

You will build, test, and repair robot hardware, working directly with engineers and researchers as prototypes evolve. Your feedback will help make designs easier to assemble and service. Success means reliable assemblies, verified repairs, and clear build methods that others can reproduce.

What you'll do
  • Teach engineers, researchers, and fellow technicians safe assembly, rework, and troubleshooting through hands-on demonstrations, coaching, and practical training materials.

  • Assemble robot subsystems, prototype printed circuit boards (PCBs), and cable harnesses, including connectors, crimps, shielding, strain relief, and routing for moving assemblies.

  • Inspect and rework surface-mount and through-hole electronics using microscopes, soldering and hot-air tools, and preheating where needed. Install rework wires and verify completed repairs.

  • Support initial power-up, bench testing, and on-robot troubleshooting. Use measurements to isolate electrical, communications, and mechanical faults, document findings, and work with engineers to resolve them.

  • Help establish electrical safe-work procedures with engineering and safety leads, and own their documentation, upkeep, and day-to-day implementation. Cover energy isolation, lockout/tagout where applicable, verification of de-energization, and stored-energy control.

  • Create and maintain clear build instructions, wiring records, inspection checklists, and test results. Help transfer repeatable build processes to external manufacturing partners for low-volume production.

  • Participate in design reviews and feed assembly and repair experience back into designs to improve buildability, serviceability, and reliability.

  • Maintain an organized, well-equipped electrical lab with effective ESD controls and tools and supplies ready for use.

What you'll need
  • 5+ years of relevant professional experience, or equivalent demonstrated experience building, reworking, and troubleshooting complex electrical and electromechanical hardware.

  • Skilled soldering and rework of small surface-mount components under a microscope, through-hole components, and larger components requiring controlled heating.

  • Experience fabricating cable harnesses for moving assemblies and integrating electrical and mechanical components using assembly drawings.

  • Ability to read electrical schematics, wiring diagrams, pinouts, assembly drawings, and build instructions, and identify discrepancies before proceeding.

  • Methodical troubleshooting using multimeters, oscilloscopes, power supplies, and related test equipment; ability to distinguish symptoms from likely causes and verify repairs.

  • Experience safely assembling, testing, and servicing electrical systems with hazardous voltages and stored energy, including batteries, capacitors, and motor drives.

  • Working knowledge of electrical fundamentals, ESD precautions, safe power-up, and workmanship inspection, with clear documentation and communication of issues and results.

Bonus

Experience in any of the following is a plus; none is required.

  • Familiarity with Linux command-line tools and Ethernet networking for device setup, connectivity checks, and troubleshooting.

  • Experience with logic analyzers, programmable loads, data acquisition systems, or Python scripting for automated testing and data collection.

  • Experience assembling or testing custom battery packs, or hardware designed for shock, vibration, and repeated cable flexing.

  • Familiarity with IPC electronics assembly, rework, or cable-harness workmanship standards.

  • An associate degree, technical training, or apprenticeship in electronics, automotive technology, manufacturing, or a related field.

$126,000 - $234,000 a year

The current reasonable and good faith estimate of the annual base salary range for this position is $126,000 - $234,000, which is based on a number of factors including, but not limited to, relevant skills and experience, educational background and certifications, performance and qualifications, market demand for the role, geographic location, and other organizational needs. An individual candidate may be considered for this position at a different job level, in which case the appropriate salary range will be provided to the candidate after their qualifications have been established.

Employees who are new to the RAI Institute typically receive an offer that is between the minimum and the midpoint of the posted salary range to allow for growth within the range over time.

Base pay is part of a competitive total compensation package that may include an annual bonus, a long-term cash incentive, monthly cell phone cost reimbursement, commuter cost subsidy, medical benefits, and more.

Any final job offer will be determined based on our established compensation range for the role, the candidate’s experience and qualifications, internal parity, and market and business considerations. The advertised pay range is not a guarantee or promise of a specific wage.

We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Hardware Engineer - Electrical
Hardware Engineer - Electrical

Robotics and AI Institute • Cambridge (MA)

On-site
USD 126,000 - 358,000
Hardware Integration and Test Engineer
Hardware Integration and Test Engineer

Robotics and AI Institute • Cambridge (MA)

On-site
USD 126,000 - 289,000
Motor dynamometer experience
Rust for embedded bring-up (bonus)
System identification (bonus)
+2
Hardware Integration and Test Engineer
Hardware Integration and Test Engineer

RAI Institute • Cambridge (MA)

On-site
USD 126,000 - 289,000
Robotics Software Engineer Interactive Mobility
Robotics Software Engineer Interactive Mobility

Robotics and AI Institute • Cambridge (MA)

On-site
USD 141,000 - 261,000
Sr. Build Engineer
Sr. Build Engineer

Robotics and AI Institute • Cambridge (MA)

On-site
USD 176,000 - 372,000
Senior Software Engineer Interactive Mobility
Senior Software Engineer Interactive Mobility

Robotics and AI Institute • Cambridge (MA)

On-site
USD 176,000 - 326,000
Software and Controls Team Lead
Software and Controls Team Lead

Robotics and AI Institute • Cambridge (MA)

On-site
USD 200,000 - 372,000
Sr. Simulation Engineer
Sr. Simulation Engineer

Robotics and AI Institute • Cambridge (MA)

On-site
USD 176,000 - 372,000
Docker
Cloud computing
Distributed systems
+3
Electrical Engineer, Robotics
Electrical Engineer, Robotics

OpenAI, Inc. • San Francisco (CA)

Hybrid
USD 287,000 - 423,000
Medical, dental, and vision insurance
401(k) with employer match
Paid parental leave
+1
Electrical Engineer
Electrical Engineer

Sereact GmbH • Boston (MA)

On-site
PHP 7,228,000 - 9,428,000
Medical insurance
401(k) with match
Paid time off
+3