Electrical Engineer (Senior/Staff), CD&H

True Anomaly; City of Long Beach (NY); On-site; USD 135,000 - 250,000; Full time

Benefits offered by this job

Best-in-class healthcare: medical, 2.5

Flexible Time Off

Daily catered lunch

401(k) retirement plan

Equity participation

Job summary

True Anomaly seeks an experienced Electrical Engineer to craft electrical system architectures for next-gen space vehicles. You will translate mission requirements into robust power, data, and control architectures, balancing performance, reliability, and mass constraints for space flight.

This role centers on systems-level thinking, integration across hardware and software, and collaboration with engineering teams to meet mission needs.

Qualifications

• Bachelor's degree in Electrical Engineering or related field.
• 5–10 years of professional experience in electrical system design.
• Strong fundamentals in circuit design and power electronics.
• Experience with system reliability analysis including FMEA or similar.
• Proficiency creating system architecture diagrams and technical docs.

Responsibilities

• Develop electrical system architectures for spacecraft avionics and power distribution.
• Create and maintain system-level diagrams and architecture docs.
• Perform FMEA to identify failure modes and drive design improvements.
• Review electrical components for mission requirements and environmental specs.
• Plan component qualification including radiation tolerance and derating.
• Define electrical interfaces for flight computers, sensors, and comms.
• Run power budgets, voltage drops, fault analysis, and load flow studies.
• Design avionics hardware like power conditioning units and motor controllers.
• Produce schematics, BOMs, and design docs using CAD tools.
• Conduct worst-case analysis and reliability assessments for space qual.

Skills

Electrical system design

FMEA

Block diagrams

System reliability

Circuit design

Documentation

Schematic capture

Education

Bachelor's degree in Electrical Engineering

Master's degree in Electrical Engineering

Tools

Altium

OrCAD

EAGLE

MATLAB

Python

Job description

OUR MISSION

True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.

OUR VALUES

• - Be the offset. We create asymmetric advantages with creativity and ingenuity.
• - What would it take? We challenge assumptions to deliver ambitious results.
• - It’s the people. Our team is our competitive advantage and we are better together.

BENEFITS & PERKS *

• - Best-in-class healthcare: 100% company-paid medical, dental, and vision coverage for you and your dependents, with HSA/HRA options
• - Generous time off: Flexible Time Off (FTO) for exempt employees, accrued PTO of up to 25 days for non-exempt employees, plus 12 paid holidays; Parental Leave; Sick Leave
• - Fuel for your day: Daily catered lunch and unlimited snacks for in-office employees
• - And more: 401(k) retirement plan, fitness reimbursement, and Dog Fridays
• - Equity participation: Equity is included as part of our total compensation package, giving you an opportunity to share in the company’s success.

*Do not apply to fixed term and temporary roles

YOUR MISSION

True Anomaly is seeking an experienced Electrical Engineer to design and develop electrical system architectures for our next-generation space vehicles. You will be responsible for defining system-level electrical architectures, performing system reliability analysis, and ensuring seamless integration of power, data, and control systems across the spacecraft. Working at the intersection of hardware design and systems engineering, you will translate mission requirements into robust electrical system solutions that meet performance, reliability, and mass constraints for space flight operations. This role emphasizes systems-level thinking — understanding how electrical subsystems interact and ensuring the overall architecture meets mission needs.

RESPONSIBILITIES

• - Develop electrical system architectures and block diagrams for spacecraft avionics, including power distribution networks, grounding schemes, and signal routing topologies
• - Create and maintain system-level block diagrams, functional flow diagrams, and architecture documentation to communicate design intent across engineering teams
• - Conduct Failure Mode and Effects Analysis (FMEA) for electrical systems to identify potential failure modes, assess risk, and drive design improvements
• - Review and evaluate electrical components, parts, and COTS products to ensure they meet mission requirements, reliability standards, and environmental specifications
• - Perform component selection and qualification planning including evaluation of radiation tolerance, temperature range, voltage margins, and derating requirements
• - Develop electrical interface requirements and specifications for avionics components including flight computers, sensors, actuators, and communication systems
• - Perform electrical system analysis including power budgets, voltage drop calculations, fault analysis, and load flow studies to ensure system performance and reliability
• - Design custom avionics hardware including power conditioning units, motor controllers, sensor interface boards, and data acquisition systems for space applications
• - Create detailed electrical schematics, BOMs, and design documentation using industry-standard CAD tools (Altium, OrCAD, or similar)
• - Conduct worst-case circuit analysis, derating studies, and reliability assessments to ensure designs meet space qualification requirements
• - Define and manage electrical interfaces between subsystems including mechanical mounting, thermal management, and electromagnetic compatibility
• - Develop and execute test plans for electrical system verification including functional testing, environmental qualification, and EMI/EMC testing
• - Support hardware bring-up, debugging, and troubleshooting using lab equipment (oscilloscopes, power supplies, multimeters, logic analyzers)
• - Collaborate with harness design teams to define cable routing, connector specifications, and wire gauge requirements
• - Perform trade studies on component selection, architecture alternatives, and design approaches to optimize system performance, reliability, and cost
• - Support integration and test activities including spacecraft-level electrical checkout, continuity testing, and flight readiness verification
• - Participate in design reviews (SRR, PDR, CDR) presenting electrical architecture, block diagrams, FMEA results, analysis, and verification status
• - Create and maintain electrical system documentation including ICDs, architecture diagrams, test procedures, analysis reports, and as-built drawings

QUALIFICATIONS

• - Bachelor's degree in Electrical Engineering or related technical field
• - 5–10 years of professional experience in electrical system design, preferably in aerospace, defense, or high-reliability applications
• - Strong fundamentals in circuit design, power electronics, and electrical system architecture
• - Experience conducting system-level reliability analysis including FMEA, fault tree analysis, or similar methodologies
• - Proficiency creating system architecture diagrams, block diagrams, and technical documentation using tools such such as Visio, Lucidchart , or similar
• - Demonstrated ability to evaluate and select electrical components based on mission requirements, environmental specifications, and reliability criteria
• - Proficiency with electrical CAD tools for schematic capture and PCB layout (Altium, OrCAD, EAGLE, or similar
• - Experience with electrical analysis including circuit simulation (SPICE), power budget analysis, and worst-case analysis
• - Hands-on experience with hardware debugging and test equipment (oscilloscopes, multimeters, power supplies, signal generators)
• - Understanding of aerospace electrical standards including wire derating, connector selection , and EMI/EMC design practices
• - Strong analytical and problem-solving skills with attention to detail in design and documentation
• - Excellent communication skills with ability to present technical concepts to multidisciplinary teams

PREFERRED SKILLS AND EXPERIENCE

• - Master's degree in Electrical Engineering or related discipline
• - Experience with spacecraft electrical systems including EPS, flight computers, motor control, or sensor systems
• - Familiarity with space-grade components, radiation effects, and qualification testing (vibration, thermal-vacuum, life testing)
• - Experience with high-voltage systems, battery management, or solar array design
• - Knowledge of digital communication protocols used in spacecraft (CAN, SpaceWire, MIL-STD-1553, RS-422, SPI, I2C)
• - Experience with MATLAB, Python, or similar tools for electrical system modeling and analysis
• - Understanding of FPGA or embedded processor interfaces and digital logic design
• - Familiarity with NASA or MIL standards (NASA-STD-8739, MIL-STD-461, MIL-STD-1540) and aerospace quality practices
• - Experience with requirements management and systems engineering processes
• - Background in signal integrity, power integrity, or high-speed digital design
• - Experience working with government or defense customers on space or launch vehicle programs

PHYSICAL DEMANDS

This position is based at our primary development facility and involves both office‑based design work and hands‑on lab activities. Work includes extended periods at a computer workstation for design and analysis, as well as time in the lab and cleanroom environments for hardware testing and integration. Physical requirements include the ability to lift equipment up to 35 lbs, bend and reach during hardware assembly and testing, and operate hand tools and test equipment. Occasional travel to supplier facilities, test sites, or launch operations may be required. Work schedule may include extended hours during critical hardware delivery and test campaigns.

COMPENSATION

• - Base Salary: $135,000-$250,000
• - Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case‑by‑case basis and may vary based on the following considerations: job‑related knowledge and skills, education, location, and experience.

ADDITIONAL REQUIREMENTS

• - Ability to maintain or obtain TS// SCI clearance
• - Work Location —this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
• - Work environment —the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• - Physical demands —the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled.

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us know.

To protect candidates and our company from application fraud and impersonation, we use third‑party tools to verify applicant identity and detect fraudulent applications. Learn more in our Privacy Notice .