Electrical Engineer Principal/New Generation

American Electric Power; Columbus (OH); On-site; USD 116,000 - 151,000; Full time

Job summary

American Electric Power in Columbus, Ohio seeks an experienced Electrical Engineer Principal SG9 to define electrical design-basis requirements and support procurement, integration, and commissioning of power generation electrical systems. You will work with A/E and EPC partners to ensure compliance with IEEE, NEC, ANSI, IEC standards, and contribute to lifecycle cost and O&M documentation.

Ideal candidates bring 8+ years of related engineering experience, ABET‑accredited degree, and familiarity

Qualifications

• Eight or more years of related engineering experience with a Bachelor’s degree in engineering.
• ABET accreditation preferred for professional engineering practice.
• PE license preferred; waiver may be possible per EVP guidance.

Responsibilities

• Define electrical design-basis requirements for generators, transformers, switchgear, MCCs and more.
• Support power system studies: load flow, short-circuit, protection coordination, arc-flash, harmonics.
• Review vendor drawings and RFx; assist with procurement specifications and scope documents.
• Provide construction, commissioning, startup, and lifecycle support across generation assets.

Skills

Power systems

Protection relays

MV/HV equipment

ETAP/SKM tools

AutoCAD/MicroStation

Education

ABET-accredited engineering degree

Professional Engineer (PE) license preferred

Tools

ETAP

SKM

PowerTools

MATLAB

AutoCAD

Job description

Job Posting End Date

10-02-2026

Please note the job posting will close on the day before the posting end date.

Job Summary

The Electrical Engineer will support gas, coal, renewable, and new‑generation self‑build projects by defining electrical design‑basis requirements and supporting the technical specification, engineering, procurement, integration, and commissioning of power generation electrical systems. A required focus of this role is advanced knowledge of utility‑scale power plant electrical systems and equipment, including generators, generator step‑up transformers (GSUs), medium‑and low‑voltage distribution systems, switchgear, motor control centers (MCCs), protective relaying, grounding systems, black‑start systems, auxiliary power systems, and grid interconnection requirements.

This role collaborates with Architect & Engineering (A/E) and Engineering, Procurement & Construction (EPC) firms and coordinates with internal and external stakeholders to ensure electrical designs meet performance, reliability, maintainability, constructability, safety, cybersecurity, and regulatory requirements. The engineer will participate in RFx/OEM engagements, support self‑build proposals, and provide construction, commissioning, startup, and lifecycle support across the generation portfolio.

Job Description

What you’ll do:

Key Responsibilities

• Support development of electrical design‑basis and equipment requirements (generators, transformers, switchgear, station service, UPS/DC, cabling).
• Assist with power system studies and data preparation (load flow, short‑circuit, protection coordination, arc‑flash, harmonics) under senior review.
• Review vendor drawings, technical bids, and RFx deliverables and prepare comments for senior engineers.
• Help prepare technical and procurement specifications and scope documents for proposals.
• Support OEM interfacing during procurement: submittal review, factory/field testing coordination, and lead‑time tracking.
• Provide construction and commissioning support: site inspections, cable/power testing, relay settings assistance, witness testing, and punch‑list follow‑up.
• Assist with protection relay settings, grounding design, cable routing, and MV/HV equipment testing.
• Ensure designs comply with relevant codes and standards (IEEE, NEC/NFPA70, ANSI, IEC) and assist with reliability/obsolescence tasks.
• Coordinate with mechanical, I&C, civil, and operations teams to resolve integration and SCADA/DCS interface items.
• Contribute to O&M documentation, spares lists, and lifecycle cost input.

Knowledge & Skills

• Understanding of protection relays, CT/VT selection, relay coordination fundamentals.
• Basic skills in grounding, cable sizing, testing, and MV/HV equipment installation practices.
• Ability to interpret single‑line diagrams, schematics, wiring diagrams, and technical reports.
• Familiarity with power electronics for renewables and storage is a plus.
• Proficiency in MS Office; familiarity with scripting or databases is beneficial.
• Effective written and verbal communication for cross‑functional coordination.

Working Conditions

• Approximately 25% travel, including day trips and overnight stays (up to a week or more).
• Work in both indoor and outdoor environments with exposure to heat, cold, noise, dust, fumes, and operating machinery.
• Mandatory safety gear required at generating stations: hard hat, eye/hearing protection, steel‑toed shoes with heels and non‑slip soles.
• Adherence to site‑specific safety requirements is mandatory.

Technical Expertise

Possesses intermediate level knowledge and performs varied assignments with proficiency in the application of theory and analytical techniques to solve diverse problems and complete extensive analysis.

Demonstrates competency in analytical techniques necessary to handle assignments of moderate complexity. (e.g., by dividing the problem into component steps, and performing the analysis necessary to complete each step). Exhibits ability to understand interrelationship between systems and component equipment. Demonstrate ability to analyze and recommend enhancements to business processes.

Leadership & Guidance

Coordinates work activities of others within the work group, department, or other corporate entities as necessary to complete routine activities. Performs routine engineering activity with minimum direction from higher‑level employees. Follows policies, practices, standards and rules of the company and those regulations and procedures required by external agencies. Provides training and guidance to lower‑level employees.

Planning & Organization Ability

Coordinates the development of input necessary to forecast costs for the routine projects, improvements requisitions, etc. Uses scheduling techniques (CPM, PERT, flow charts, etc.) for budget and planning activities. Initiates corrective action when project objectives are not being met.

Problem Solving & Initiative

Resolves and initiates solutions to routine problems which usually require additional definition/clarification before analysis can begin. Demonstrates ability to identify problems that are beyond the normal routine. Demonstrates ability and desire to seek out opportunities and embrace new ideas and approaches.

Communication

Develops, reviews, or presents technical reports such as improvement requisitions, studies, and analyses in as clear, concise and effective fashion.

Interpersonal Skills

Is an active team member. Networks with peers inside and outside the AEP system. Identifies key stakeholders. Uses informal network to get things done. Resolves conflict, builds consensus.

Decision Making

Makes decisions subject to review within established policies and procedures. Makes decisions that affect the work of the team. Aware of risks. Demonstrates the ability to extrapolate beyond known facts to reach logical conclusions.

Business Awareness & Characteristics

Understands AEP's organizational structure and the specific role and responsibility of their individual organizational unit. Demonstrates an understanding of the budgeting and approval process. Is proficient in the application and use of economic analysis techniques in problem solving. Develops an understanding of utility regulation and financing.

What we’re looking for:

Engineer Principal SG9

Education/Experience:

• Has typically acquired 8 or more years of related engineering experience along with a Bachelor's degree in engineering in a program accredited by ABET*;
• Or 6 years of related engineering experience along with a Master's or PhD in engineering from a program accredited by ABET*.
• Registration as a Professional Engineer (PE) in any U.S. state or Puerto Rico** is preferred for this position unless approval to waive this requirement is given by the organization's EVP.
• ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology.
• Individuals with a Bachelor’s degree in Engineering Technology can satisfy this degree requirement, if they obtain a certified Professional Engineering (PE) license.

Acceptable alternative:

• Bachelor’s degree in engineering (non-ABET) plus a Master's degree or PhD in engineering from a university with an ABET accredited Bachelor's program.
• ** Confirmation is preferred to ensure the PE obtained in Puerto Rico aligns with NCEES standards.
• VP or above may waive the requirement for a degree from a university with a Non ABET accredited program.

In addition:

• Experience across gas, coal, and renewable projects; commissioning experience on simple/combined‑cycle plants.
• Experience with battery storage, inverters, or utility interconnection practices.
• Working knowledge of simple‑and combined‑cycle plant electrical systems, generator synchronization, and MV/HV equipment.
• Familiarity with power system study tools and analysis methods.
• Experience reviewing vendor drawings and RFx responses.
• Proficiency with electrical design/analysis tools (ETAP, SKM/PowerTools, CYME, MATLAB, AutoCAD/MicroStation, or equivalent).

Where you’ll work:

This role sits on site in Columbus Ohio, Shreveport, Louisiana, Tulsa, Oklahoma or Charleston, West Virginia

What you’ll get:

Engineer Principal SG9($116,255-$151,132)

Compensation Data

Compensation Grade:

SP20-009

Compensation Range:

$116,255.00 - $151,132.50

The Physical Demand Level for this job is: S – Sedentary Work:

Exerting up to 10 pounds of force occasionally (Occasionally: activity or condition exists up to 1/3 of the time) and/or a negligible amount of force frequently. (Frequently: activity or condition exists from 1/3 to 2/3 of the time) to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met.

Hear about it first!

Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one.

Equal Employment Opportunity Statement

It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer‑employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

American Electric Power (On‑Site)

$116K‑ $151K / Year

#AEPCareers

#ElectricalEngineer