Electrical Engineer

Transmission & Distribution World

Los Angeles (CA)

On-site

USD 90,000 - 130,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Transmission & Distribution World supports a Federal Electrical Engineer role with the Bureau of Reclamation in the Upper Colorado Basin. This position may require overnight travel and a government charge card for travel.

Typical duties include engineering design review, regulatory compliance, and development of standards and policies to improve power operations and security. Candidates should be prepared for a rigorous federal posting and location-specific pay scales.

Qualifications

  • ABET-accredited engineering degree required.
  • Specialized experience in power systems, SCADA, and regulatory compliance.
  • Ability to travel and obtain security clearances.

Responsibilities

  • Lead Reclamation-wide performance audits for PO&M and compliance with NERC/WECC.
  • Review designs, drawings, and contract documents for quality and compliance.
  • Develop engineering policies, standards, and project objectives.

Skills

Power systems
Regulatory compliance
Engineering reviews
Policy & standards
Cybersecurity basics

Education

ABET-accredited Engineering degree

Tools

SCADA
EACSS
NERC CIP

Job description

Summary

You will serve as an Electrical Engineer with Bureau of Reclamation. This position is located within the Department of the Interior, Bureau of Reclamation, Upper Colorado Basin Region. You may be required to travel overnight up to 1 week per quarter. You must obtain a government charge card for travel purposes. Pay will vary based on grade level and/or duty location for which you're selected. First time hires to the Federal government normally start at the step 1 rate.

Duties

This is a Merit Promotion announcement for current career and career conditional Bureau employees, Career Transition eligibles (CTAP), and Bureau Land Management Workforce Flexibility Act (LMWFA) eligibles. Refer to Required Documents section for more information. Some of the major duties you will perform include but are not limited to the following: Leads Reclamation-wide performance audits to assess consistency with documented Power Operations & Maintenance (PO&M) practices and compliance with NERC/WECC electric reliability standards throughout Reclamation. Provides engineering support in connection with regulatory program oversight, policy and rulemaking efforts, review of regulatory compliance issues, and resolution of engineering related issues as they are encountered. Ensures compliance with applicable electric reliability requirements (e.g., NERC, WECC). Develops standards to adhere to Department and industry security guidelines to minimize risk of cyberattacks. Provides technical reviews, peer reviews, and checking of designs, drawings, engineering analysis, technical documents, specifications, cost estimates, and contract correspondence, ensuring documents are accurate and quality assurance processes were followed. Develops engineering policies, technical guidelines and standards, and/or project or study objectives.

Requirements

Must be a U.S. Citizen or National. Appointment subject to background investigation and favorable adjudication. Males born after 12-31-59 must be registered for Selective Service. Direct Deposit participation required. Successfully pass the E-Verify employment verification check. To learn more, visit https://www.e-verify.gov/. Must possess and maintain a valid driver's license throughout employment. You are required to complete training, obtain and maintain a government credit card with travel and purchase authority. As a condition of employment for accepting this position, you may be required to serve a 1-year probationary period to evaluate your fitness and whether your continuation of employment advances the public interest. This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Qualifications

Qualifications: All qualifications must be met by the closing date of this announcement - 12/03/2026 - unless otherwise stated in this vacancy announcement. Competitive candidates must also meet Time-in-Grade requirements as defined in 5 CFR 300, Subpart F. For current Federal employees, if hours worked per week are not included on your resume, you must submit a non-award SF-50 as part of your application to be used to validate your work schedule and determine the amount of specialized experience that you will be granted. An award SF-50 will not be acceptable documentation for which to consider your amount of qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the work schedule requirement as the service dates will be reflected. For all other applicants who are not current federal employees, your resume must state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Minimum Qualification Requirements: To qualify for this position, you must meet the following minimum qualifications: Basic Educational Requirement AND Specialized Experience for the series to which you are applying. Basic Educational Requirements: In addition to the specialized experience requirements for this position, you must meet at least one of the following: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) AND Specialized experience: To qualify for this position at the GS-13 grade level: To qualify, you must possess at least one full year of specialized experience equivalent to the GS-12 level in the Federal service (obtained in either the public or private sectors). Specialized experience is defined as demonstrated experience: Designing, engineering, or managing contract deliverables for power generation SCADA and/or Electronic Access Control and Monitoring System (EACSS) communication architectures to ensure compliance with NERC Critical Infrastructure Protection (CIP) reliability standards. Conducting technical evaluations of power generation SCADA and/or EACSS systems and supporting documentation to uncover system or documentation deficiencies and establishing tracking milestones to achieve full resolution. You must include hours per week worked. Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrical Engineer
Electrical Engineer

Transmission & Distribution World • Oklahoma City (OK)

On-site
USD 88,000 - 110,000
FUL-Electrical Engineer
FUL-Electrical Engineer

Department of Interior • Washington

On-site
USD 65,000 - 90,000
Electrical Engineer (Programming)
Electrical Engineer (Programming)

US Bonneville Power Administration • Spokane (WA)

On-site
USD 80,000 - 110,000
Electrical Engineer
Electrical Engineer

Bonneville Power Administration • United States

On-site
USD 90,000 - 130,000
Electrical Engineer (Reliability Compliance).
Electrical Engineer (Reliability Compliance).

US Army Corps of Engineers • Pomeroy (WA)

On-site
USD 90,000 - 130,000
Electrical Engineer (Programming)
Electrical Engineer (Programming)

Bonneville Power Administration • United States

On-site
USD 70,000 - 100,000
Electrical Engineer.
Electrical Engineer.

US Army Corps of Engineers • Walla Walla (WA)

On-site
USD 70,000 - 130,000
Electrical Engineer
Electrical Engineer

Bureau of Reclamation • Grand Coulee (WA)

On-site
USD 90,000 - 120,000
Electrical Engineer
Electrical Engineer

US Bonneville Power Administration • Vancouver (WA)

On-site
USD 90,000 - 130,000
Electrical Engineer.
Electrical Engineer.

US Army Corps of Engineers • Umatilla (OR)

On-site
USD 90,000 - 140,000