Dynamics Quality Performance

altentechnologyusa

Auburn Hills (MI)

On-site

USD 90,000 - 130,000

Full time

6 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

ALTEN Technology USA seeks a Vehicle Dynamics engineer to lead development and validation of ride, steering, handling, and tire performance for Client vehicles. You will minimize sensitivity to road and build variations, drive simulation and in-vehicle tests, and own CAE activities for steering and suspension across variants.

The role is based at the Chelsea Proving Grounds in Michigan with domestic and occasional international travel.

Qualifications

  • Bachelor of Science in Mechanical or Electrical Engineering or equivalent (ABET-accredited).
  • Chassis design/vehicle dynamics experience.
  • Strong understanding of design/development processes.
  • Experience with suspension/steering/brake kinematics and vibration studies.
  • Proficient with CAE tools: ADAMS/Car, CarSim, VI-CarRealtime, NASTRAN, AMEsim, MATLAB/Simulink.

Responsibilities

  • Lead CAE/virtual analysis for steering/suspension development across variants.
  • Develop and validate ride/handling objectives; plan analytical support for physical tuning.
  • Perform in-vehicle tests and pre-production validation.
  • Collaborate with cross-functional teams and mentor junior engineers.
  • Provide design recommendations to improve vehicle dynamics performance.

Skills

Vehicle dynamics
CAE leadership
Testing
Simulation
Multi-body analysis
Communication

Education

ABET-accredited engineering degree

Tools

ADAMS/Car
CarSim
VI-CarRealtime
NASTRAN
AMesim
OptiStruct
I-Sight
MATLAB/Simulink

Job description

We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life-from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group-57,000+ engineers in 30 countries-we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

Job Description:
  • Development, and validation, of Vehicle Dynamics functionality as it relates to Chassis quality/warranty of Client vehicles OR development, and validation, of ride, steering, handling, and tire performance to meet functional objectives of Client vehicles..
  • The overall objective is to minimize vehicle/suspension sensitivity to variation in forces induced by road surfaces, assembly build variation, vehicular architecture, and/or wear.
  • Responsible for quality testing activities throughout all Program development phases; from up-front target setting and design definition, through in-vehicle testing on prototype properties, and then pre-production (pilot) properties.
  • Ensure that critical components have appropriate targets/specifications to minimize sensitivity to brake rotor wear (judder), tire/wheel imbalance, vehicle lead/drift/pull, steering wander, torque steer, and vehicle shake (ride). This will be accomplished through a combination of simulation, objective testing, and subjective evaluation methods
  • Responsible for in-vehicle development of the critical components to meet the vehicle's overall ride, steering, handling, and tire performance objectives.
  • This development work takes place predominantly at the Chelsea Proving Grounds in Michigan, with travel required to other test locations as both weather, and test surface conditions dictate (Significant travel occurs during the winter months, with trips lasting 2-3 weeks at a time. Travel is mostly domestic within North America, but can also be international, and is approximately 20% of the time)
  • Requires specialized driving skills for subjective ride, steering, routine handling and limit handling evaluations.
  • Responsible for the leadership of all CAE/virtual analysis activity associated with steering/suspension hard-point development; steering/suspension component stiffness /damping specification; and ride/handling performance optimization for all variants of a vehicle architecture, including formulation of design recommendations.
  • Analysis/optimization of suspension/steering sub-system kinematics and compliance.
  • Analytical assessments of steady state/transient handling behavior; and calculation of associated component loads for various Handling events (Emergency handling/fish-hook, Trailer Tow SAE J2807, Slowly Increasing Steer, Step Steer, Off-Road events for Trail Rating.) Simulation of ride events and associated characterization of performance (Primary Ride (Low frequency events), Secondary Ride (High frequency events), Impact harshness , Vehicle pitch under braking, Vehicle head-toss , Shimmy and Wander and Brake Judder.)
  • Development/validation/ownership of all associated vehicle/sub-system simulation models (multi-body/ADAMS, parametric/CARSIM, VICarRealtime, NASTRAN/flex-body.)
  • Develop models and provide on-site support for driving simulator studies.
  • Formulate/execute plans for analytical support of physical mule tuning activities. Develop new CAE/simulation processes as needed.
Qualification:
  • Bachelor of Science degree in Mechanical Engineering, Electrical Engineering or Equivalent from an Accreditation Board for Engineering and Technology (ABET) accredited university. Driving vehicles on CPG, Dynamics assesment, familairchassia and Dynamics components, Validation vehicles
  • Experience in chassis design/development and/or vehicle dynamics engineering experience.
  • Solid understanding of system/component design/development processes.
  • Experience with processes and simulation techniques associated with suspension/steering/brake system kinematics/compliance/vibration studies, vehicle ride/handling assessments, component structural analysis, and optimization.
  • Experience with associated simulation tools: ADAMS/Car, Altair Motionview, Opti-struct, NASTRAN, AMEsim, CARsim, I-Sight, Matlab, Simulink, VI-Car realtime.
  • Advanced user of ADAMS/Car, Carsim, and VI-Car realtime.
  • Experience with driving simulator studies and associated preparation, validation, and loading of CAE/virtual models.
  • Excellent communication skills and the ability to coordinate activities with the exte
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Dynamics Quality Performance
Dynamics Quality Performance

ALTEN • Auburn Hills (MI)

On-site
USD 90,000 - 130,000
Dynamics Quality Performance
Dynamics Quality Performance

ALTEN Technology USA • Auburn Hills (MI)

On-site
USD 110,000 - 170,000
Vehicle Dynamics Quality Performance Engineer
Vehicle Dynamics Quality Performance Engineer

Alten USA • Chelsea (MI)

On-site
USD 120,000 - 180,000
Dynamics Validation Engineer
Dynamics Validation Engineer

altentechnologyusa • Auburn Hills (MI)

On-site
USD 90,000 - 120,000
Dynamics Validation Engineer
Dynamics Validation Engineer

Alten USA • Chelsea (MI)

On-site
USD 85,000 - 120,000
Vehicle Dynamics Engineer – Ride & Handling Specialist
Vehicle Dynamics Engineer – Ride & Handling Specialist

altentechnologyusa • Auburn Hills (MI)

On-site
USD 90,000 - 130,000
Dynamics Validation Engineer
Dynamics Validation Engineer

ALTEN Technology USA • Auburn Hills (MI)

On-site
USD 90,000 - 120,000
Vehicle Dynamics Quality & Ride Engineer
Vehicle Dynamics Quality & Ride Engineer

Alten USA • Chelsea (MI)

On-site
USD 120,000 - 180,000
Dynamics Validation Engineer
Dynamics Validation Engineer

ALTEN • Auburn Hills (MI)

On-site
USD 90,000 - 120,000
Vehicle Dynamics CAE Engineer
Vehicle Dynamics CAE Engineer

Aquent • San Francisco (CA)

On-site
USD 140,000 - 200,000