DRONE BUILDER / ELECTRICAL INTEGRATION TECHNICIAN

ViDARR Inc.

Virginia Beach (VA)

On-site

USD 54,000 - 66,000

Full time

16 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Health insurance
Paid time off
Vision insurance

Job summary

ViDARR Inc. is seeking a hands-on Drone Builder / Electrical Integration Technician to assemble unmanned aerial systems and robotic platforms. The role focuses on precision soldering, electrical integration, wiring, component installation, and repeatable bench production for a production environment.

The ideal candidate has strong soldering skills and an intermediate understanding of electrical fundamentals. Drone or robotics experience is preferred, but an engineering degree is not required.

Qualifications

  • At least 1 year hands-on soldering, electronics assembly, electrical integration, avionics, robotics, or similar.
  • Ability to create clean, reliable solder joints on small components and PCBs.
  • Intermediate electrical fundamentals: voltage, current, resistance, power, polarity, continuity.
  • Ability to diagnose shorts, open circuits, voltage drops, and damaged components.
  • Experience with soldering stations, heat guns, wire strippers, crimpers, multimeters, and basic power tools.
  • Ability to read and follow technical drawings, wiring diagrams, schematics, and BOMs.

Responsibilities

  • Assemble multirotor drones, fixed-wing aircraft, and other unmanned systems from prototype to production.
  • Perform precision soldering on flight controllers, ESCs, motors, and wiring.
  • Fabricate and install wiring harnesses, power leads, and connectors.
  • Install propulsion, avionics, batteries, payloads, frames, and 3D-printed components.
  • Read engineering drawings and BOMs, follow work instructions and travelers.
  • Conduct checks before quality inspection or flight testing.
  • Troubleshoot electrical, wiring, and integration problems; repair as needed.
  • Maintain build records and communicate issues to engineering and quality.

Skills

Soldering
Electronics assembly
Electrical integration
Robotics experience
Reading schematics
Hand tools

Tools

Soldering stations
Heat guns
Wire strippers
Crimpers
Multimeters

Job description

ViDARR is seeking a hands-on Drone Builder / Electrical Integration Technician to assemble and produce unmanned aerial systems and related robotic platforms. This role is focused on precision soldering, electrical integration, wiring, component installation, troubleshooting, and repeatable bench production. The ideal candidate has strong soldering skills and an intermediate understanding of electrical fundamentals; drone or robotics experience is preferred, but an engineering degree is not required. This is a build-focused position, not primarily a flight-test or engineering leadership role.

PRIMARY RESPONSIBILITIES

· Assemble multirotor drones, fixed-wing aircraft, and other unmanned or robotic systems from prototype through repeatable production.

· Perform precision soldering on flight controllers, electronic speed controllers, motors, power-distribution components, connectors, cameras, GPS units, radios, sensors, and wiring.

· Fabricate and install wiring harnesses, connectors, power leads, signal wiring, and related electrical assemblies.

· Install propulsion systems, avionics, communications equipment, batteries, payloads, frames, mounts, housings, and 3D-printed components.

· Read and follow engineering drawings, wiring diagrams, component datasheets, bills of materials, work instructions, and assembly travelers.

· Conduct continuity, voltage, polarity, resistance, power-on, communication, and basic functional checks before systems move to quality inspection or flight testing.

· Troubleshoot and repair electrical, wiring, mechanical, and integration problems, including shorts, open circuits, poor connections, incorrect polarity, and failed components.

· Perform basic flight-controller, ESC, radio, or firmware setup only as needed to validate bench-level electrical integration and system functionality.

· Maintain accurate build records, including serial numbers, as-built configurations, component changes, inspections, discrepancies, corrective actions, and rework; communicate buildability or documentation issues to engineering and quality personnel.

· Maintain a clean, organized, safe, and accountable production workspace.

REQUIRED QUALIFICATIONS

· At least one year of hands-on soldering, electronics assembly, electrical integration, avionics, robotics, or similar technical assembly experience.

· Demonstrated ability to create clean, reliable solder joints on small electronic components, PCBs, connectors, motors, power wiring, and signal wiring.

· Intermediate understanding of electrical and electronic fundamentals, including voltage, current, resistance, power, polarity, continuity, grounding, power distribution, and series/parallel circuits.

· Ability to diagnose common electrical issues including shorts, open circuits, voltage drops, poor connections, incorrect polarity, and damaged components.

· Experience using soldering stations, heat guns, wire strippers, crimpers, multimeters, hand tools, and basic power tools.

· Ability to read and follow technical drawings, wiring diagrams, schematics, component datasheets, assembly instructions, and bills of materials.

· Ability to understand and communicate using standard engineering and manufacturing terminology, including revisions, tolerances, specifications, work instructions, and configuration changes.

· Strong mechanical aptitude, attention to detail, and ability to perform repetitive bench assembly while maintaining consistent workmanship and quality.

· Ability to work independently and collaboratively with engineering, production, quality, and operations teams.

· Ability to perform bench assembly for extended periods, lift up to 50 pounds, and satisfy applicable U.S. work-authorization, customer, facility-access, and security requirements.

PREFERRED QUALIFICATIONS

· Two or more years of experience building or repairing unmanned aerial systems, FPV drones, target drones, fixed-wing aircraft, UGVs, robotics, RC aircraft, or similar electronic systems.

· Experience integrating flight controllers, ESCs, brushless motors, receivers, GPS units, video transmitters, CMOS or thermal cameras, radios, and other UAS electronics.

· Experience fabricating wire harnesses and installing crimped, locking, or military-style connectors.

· Experience with Fusion 360, SolidWorks, or similar CAD software for reviewing, modifying, or creating basic components and assemblies.

· Experience operating and troubleshooting FDM 3D printers, preparing prints, and working with additive-manufactured components.

· Experience in defense, aviation, electronics manufacturing, robotics, prototype development, or another quality-controlled technical environment; military technical or engineering-technician experience is a plus.

· Relevant soldering or electronics assembly certifications (e.g., IPC J-STD-001 or equivalent) are preferred. Candidates with strong hands-on experience may be considered without a current certification; company-sponsored certification may be provided after hire based on role requirements.

PERFORMANCE EXPECTATIONS

· Produce safe, reliable, professional-quality systems with minimal rework or component damage.

· Meet production schedules and build-volume expectations while maintaining documentation, configuration control, and quality requirements.

· Demonstrate a hands-on, production-oriented mindset and maintain focus during repetitive technical assembly without sacrificing workmanship or quality.

· Identify and promptly escape design, supply-chain, assembly, documentation, or quality issues; demonstrate accountability, teamwork, urgency, and continuous improvement.

COMPENSATION, SCHEDULE, AND WORK ENVIRONMENT

This is a full-time, on-site position based at ViDARR in Portsmouth, New Hampshire, with an annual salary of $60,000. The expected work schedule is approximately 40 hours per week, generally Monday through Friday, with daily hours coordinated based on production and operational requirements. This position reports to the Director of Products. The role works primarily in a hands-on engineering, prototype, production, and electrical-integration environment. Occasional travel to customer demonstrations, test sites, or other ViDARR facilities may be required.

BENEFITS

Full-time employees are eligible for company medical, dental, and vision insurance, paid holidays, PTO, applicable leave programs, professional development, and other company-offered benefits. Specific eligibility requirements and benefit details are provided by Human Resources and governed by current company policies and applicable law.

  • Health insurance
  • Paid time off
  • Vision insurance
EQUAL OPPORTUNITY

ViDARR is an equal-opportunity employer. Employment decisions are based on qualifications, merit, and business needs, without regard to any status protected by applicable law

Work Location: In person, must be able to reliably commute to Virginia Beach, Virginia

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Drone Builder & Electronics Integration Specialist
Drone Builder & Electronics Integration Specialist

ViDARR Inc. • Virginia Beach (VA)

On-site
USD 54,000 - 66,000
Health insurance
Paid time off
Vision insurance
UAV Engineer
UAV Engineer

Sine Eng • Fredericksburg (VA)

On-site
USD 42,000 - 65,000
15 days vacation
5 personal/sick days
Health insurance
+1
Build Assembler 2nd Shift
Build Assembler 2nd Shift

Unusual Machines • Orlando (FL)

On-site
USD 30,004 - 42,733
Comprehensive benefits package
PTO and paid holidays
Catered Lunch/Dinner 5 days a week
+1
UAV Engineer
UAV Engineer

Sine Engineering • Fredericksburg (VA)

On-site
USD 90,000 - 150,000
Paid vacation and personal days
Health, dental, 401(k) plans
Cross-border collaboration with Europe
Manufacturing Technician
Manufacturing Technician

Draganfly Inc. • Fairfax (VA)

On-site
USD 58,000 - 70,000
Health Coverage Reimbursement
401(k) with employer matching
Generous time-off program
+1
Manufacturing Technician
Manufacturing Technician

Draganfly • Merrifield (VA)

On-site
USD 28,000 - 41,000
Health Coverage Reimbursement
401(k) matching
Generous time-off program
+1
Manufacturing Technician (Soldering Experience Required)
Manufacturing Technician (Soldering Experience Required)

Vector • Bluffdale (UT)

On-site
USD 25,000 - 39,000
Manufacturing Technician
Manufacturing Technician

Draganfly Innovations, Inc. • Fairfax (VA)

On-site
USD 25,000 - 39,000
Health coverage reimbursement
401(k) with employer matching
Generous time-off program
+1
Drone Development Mechanical Engineer
Drone Development Mechanical Engineer

EV.Careers • Jacksonville (FL)

On-site
USD 120,000 - 180,000
Signing bonus
Relocation support
Health insurance
Production Assembly Technician
Production Assembly Technician

VIVA • Saint Paul (MN)

On-site
USD 28,000 - 36,000