Die Cast Support Technician - 3rd Shift

Madison-Kipp Corporation

Madison (WI)

On-site

USD 30,000 - 47,000

Full time

2 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Madison-Kipp Corporation in Wisconsin is seeking a Die Cast Support Technician to lead a safe, efficient work cell and to develop and train Die Cast Operators. Responsibilities include safely setting up production dies and all ancillary equipment for auto/manual die cast machines.

You will inspect castings, read instructions, document TPM tasks, and support continuous improvement while training peers and ensuring parts meet specifications.

Qualifications

  • High school diploma or equivalent and basic math skills.
  • Ability to read blueprints and interpret dimension reports.
  • Experience with machining and precision gauging is preferred.

Responsibilities

  • Set up cell equipment to support production and ensure readiness.
  • Understand and use shot trace capability in daily work.
  • Train Die Cast Operators in TPM and document TPM activities.
  • Follow work instructions and complete required paperwork accurately.
  • Inspect castings and ensure they meet dimensional and visual specs.
  • Operate and adjust Die Cast Machines and related equipment.
  • Lead and coach team members, promoting continuous improvement.

Skills

Tool wear timing
Leadership
Blueprint reading
Precision gauging
Team training

Education

High school diploma or equivalent
Reading, writing and shop math

Job description

POSITION SUMMARY

The Die Cast Support Technicians will provide necessary leadership to ensure a safe and efficient work cell, and will work towards the ongoing development and continued training of our Die Cast Operators. They are responsible for safely setting up production dies and all ancillary equipment for auto/manual die cast machines.

ESSENTIAL FUNCTIONS
  • Set up all cell equipment necessary to support production.
  • Understand and use shot trace capability.
  • Know and understand the importance of TPM tasks, including the training of our Die Cast Operators in TPM and the overall importance of this task. Support Techs are required to verify compliance of all TPM’s to the defined schedules, as well as document Total Preventive Maintenance (TPM) operations, as required.
  • Follow and understand all work instructions and the ability to complete all paperwork within their area of responsibility. Paper work could include; count accuracy, count boards, process check sheets, audits, quality check sheets, TPM and other paperwork as assigned, or defined.
  • Process castings / parts to ensure that they are being produced handled and moved onto next operation, following all established guidelines, procedures and part specifications.
  • Operate and make adjustments to Die Cast Machine(s) and its related equipment, such as; Auto Ladles, Auto Reciprocators, ABB Robot and Trim Presses to produce quality castings, on time to meet production schedules.
  • Inspect and gage castings as outlined in work instructions, to ensure that the product meets, or exceeds all dimensional and visual characteristics as defined.
  • Pro-actively provide support, analysis and troubleshooting skills to co-workers and other areas that are experiencing difficulty, high workload, and quality and or productivity issues.
  • Read and follow operator, set-up and Quality instructions following quality standards. Routinely review and maintain all QS books to ensure instructions are accurate and current.
  • Maintain a work environment which follows the guidelines of 5S, SmartWay, and waste elimination.
  • Train and transfer knowledge to all group members and new personal on the operation of machines and processes within specialty area.
  • Actively work on cost-reduction and continuous improvement activities.
  • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.
  • Duties, responsibilities, and activities may change at any time with or without notice.
WORKING CONDITIONS

Heavy Manufacturing Environment. MKC houses different machinery, equipment, processes, and chemicals which produce potential hazards in the work environment such as: ergonomic, chemical, machine point of operation, and powered industrial vehicle traffic. These hazards are controlled through means of engineering controls, such as machine guarding, and administrative controls, such as safety policies and programs. The noise level in the work environment is moderate to noisy. In certain areas of the facility, employees are required to wear Personal Protective Equipment such as Hearing Protection, Safety Glasses, Safety Toe Shoes, and hand protection.

PHYSICAL DEMANDS

While performing the duties of this job, the employee is regularly required to talk and listen; and use hands to manipulate objects or controls. The employee is regularly required to stand, stoop, bend, or reach above the shoulders. The employee must be able to lift and/or move up to 50 pounds. Must be able to regularly walk throughout all the manufacturing facilities.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Appropriate education and/or experience may be substituted on an equivalent basis.

  • High school diploma or equivalent.
  • Reading, writing and shop math skills (including fractions, decimals and both English and metric measurement).
  • Preferably four (4) or more years of machining experience.
LANGUAGE SKILLS
  • Ability to read, write, and understand English.
  • Proficient written and verbal communication skills.
JOB SKILLS
  • Have the knowledge of when and the timing of tool wear and how to make tool changes such as mill cutters, drills, taps, and cutting inserts as well as adjustments to keep parts within customer quality specification.
  • Mechanically inclined, adaptable and able to communicate both verbally and in writing. Leadership skills and close attention to detail is required along with commonsense.
  • Read and understand blueprints and dimension & gage reports.
  • Able to use and understand, micrometers, electronic indicators, dial calipers and other precision gauges as needed to perform duties of the Support Tech.
  • Demonstrate leadership abilities, which include; instruct, train, monitor, and coach.
TRAVEL REQUIREMENT
  • Less than 5%
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sr. Die Cast Support Technician
Sr. Die Cast Support Technician

Madison Kipp Corporation • Madison (WI)

On-site
USD 60,000 - 80,000
Die Repair Technician - All Shifts
Die Repair Technician - All Shifts

Madison Kipp Corporation • Madison (WI)

On-site
USD 50,000 - 70,000
Maintenance Technician - 2nd Shift
Maintenance Technician - 2nd Shift

Madison-Kipp Corporation • Madison (WI)

On-site
USD 55,000 - 75,000
Maintenance Technician - All Shifts
Maintenance Technician - All Shifts

Madison Kipp Corporation • Town of Sun Prairie (WI)

On-site
USD 50,000 - 70,000
Maintenance Technician - All Shifts
Maintenance Technician - All Shifts

Madison Kipp Corporation • Madison (WI)

On-site
USD 50,000 - 70,000
Machining Support Technician (All Shifts)
Machining Support Technician (All Shifts)

Madison Kipp Corporation • Town of Sun Prairie (WI)

On-site
USD 40,000 - 60,000
Robot Technician
Robot Technician

Madison Kipp Corporation • Town of Sun Prairie (WI)

On-site
USD 50,000 - 70,000
Die Cast & CNC Equipment Technician
Die Cast & CNC Equipment Technician

Madison Kipp Corporation • Town of Sun Prairie (WI)

Hybrid
USD 52,000 - 75,000
Maintenance Technician - 2nd Shift
Maintenance Technician - 2nd Shift

Madison Kipp Corporation • Town of Sun Prairie (WI)

Hybrid
USD 52,000 - 75,000
Die Cast Technician
Die Cast Technician

Fort Recovery Industries, Inc. • Kentucky

On-site
USD 35,000 - 50,000