Design For Manufacturing Senior Engineer

Stellantis NV; Auburn Hills (MI); On-site; USD 120,000 - 160,000; Full time

Benefits offered by this job

Comprehensive Health Coverage

Paid Time Off & Holidays

401(k) Matching

Company Vehicle Lease Program

Family Building Benefit

Tuition Reimbursement

Volunteer hours

Job summary

Stellantis NV seeks a Design for Manufacturing Engineer to shape the manufacturing readiness of next-generation automotive electronics, including High Performance Computers and domain controllers. You will connect Product Development with manufacturing partners to make designs manufacturable, assemblable, testable, scalable and cost-effective.

You will influence electrical, PCB, mechanical, thermal, assembly and production-test decisions from early concept through launch and mass production,

Qualifications

• Bachelor's degree in a related technical discipline.
• 8+ years of experience in automotive electronics development or manufacturing engineering.
• Experience launching complex electronic products through prototype, pilot, ramp-up and mass production.
• Experience working with EMS or Tier-1 manufacturing partners in a Built-to-Print model.
• Working knowledge of APQP, PPAP, DFMEA/PFMEA, Control Plans, MSA, SPC, capability studies, 8D and engineering change control.
• Ability to read and challenge schematics, PCB data, Gerber/ODB++, BOMs, mechanical drawings, GD&T, tolerance analyses and manufacturing specifications.

Responsibilities

• Lead DFM, DFA and DFT activities from architecture through launch and continuous improvement.
• Conduct manufacturing-feasibility reviews of schematics, PCB technologies and layouts.
• Define and maintain manufacturing design rules, checklists and gate deliverables.
• Evaluate PCB and PCBA manufacturability including stack-ups and HDI/microvias.
• Partner with Test Engineering to ensure ICT and functional test coverage.
• Ensure Built-to-Print production data packages are complete and controlled.
• Assess EMS and manufacturing-partner technology, process maturity and capacity.
• Lead manufacturing-risk tracking and drive closure with owners and dates.
• Support prototype, pilot, validation, ramp builds and defect containment.
• Analyze yield, defect, cycle-time, capability, scrap and rework data for improvements.
• Support APQP, PPAP, DFMEA/PFMEA, process-flow, Control Plan, MSA, SPC and change-control activities.
• Collaborate with hardware, PCB, mechanical, thermal, software, test, quality and supply chain teams.

Skills

Cross-functional leadership

Technical problem-solving

Communication skills

Organizational skills

Education

Bachelor's degree in engineering

Tools

PCB fabrication

SMT/PCBA manufacturing

ECU final assembly

Job description

Stellantis is seeking a Design for Manufacturing Engineer to shape the manufacturing readiness of next-generation automotive electronics, including High Performance Computers, domain controllers, zonal controllers and electronic control units.

In this role, you will connect Product Development with manufacturing partners to make product designs manufacturable, assemblable, testable, scalable and cost-effective. You will influence electrical, PCB, mechanical, thermal, assembly and production-test decisions from early concept through launch and stable mass production.

Responsibilities:

• Lead DFM, DFA and DFT activities from architecture and concept through validation, industrialization, launch and continuous improvement.
• Conduct manufacturing-feasibility reviews of schematics, PCB technologies and layouts, component selection, thermal interfaces, enclosures, connectors, fasteners, sealing concepts and tolerance schemes.
• Define and maintain manufacturing design rules, checklists, review criteria, lessons learned and gate deliverables.
• Evaluate PCB and PCBA manufacturability, including stack-ups, HDI/microvias, panelization, fine-pitch and BGA assembly, solder-paste printing, reflow, SPI, AOI, X-ray, selective soldering, press-fit, coating and rework.
• Partner with Test Engineering to ensure access and coverage for ICT, flying probe, boundary scan/JTAG, programming/flashing, functional test and end-of-line test.
• Ensure Built-to-Print production data packages are complete, consistent and configuration-controlled.
• Assess EMS and manufacturing-partner technology, process maturity, equipment, capacity, automation, traceability, quality controls and launch readiness.
• Lead manufacturing-risk tracking and drive findings to closure with owners, due dates and objective evidence.
• Support prototype, pilot, validation, run-at-rate, safe-launch and production-ramp builds, including defect containment and root-cause resolution.
• Analyze yield, defect, cycle-time, capability, scrap, rework and test data to drive design and process improvements.
• Support APQP, PPAP, DFMEA/PFMEA, process-flow, Control Plan, MSA, SPC and change-control activities.
• Collaborate with hardware, PCB, mechanical, thermal, software, test, validation, quality, sourcing, supply chain, program teams and global manufacturing partners.

Basic Qualifications:

• Bachelor's degree in Electrical, Electronics, Mechanical, Manufacturing, Mechatronics, Industrial Engineering or a related technical discipline.
• A minimum of 8 years of experience in automotive electronics development, manufacturing engineering, industrialization or supplier manufacturing engineering.
• Experience launching complex electronic products through prototype, pilot, ramp-up and mass production.
• Practical knowledge of PCB fabrication, SMT/PCBA manufacturing, ECU final assembly, production test and defect mechanisms.
• Experience working with EMS or Tier-1 manufacturing partners in a Built-to-Print model.
• Working knowledge of APQP, PPAP, DFMEA/PFMEA, Control Plans, MSA, SPC, capability studies, 8D and engineering change control.
• Ability to read and challenge schematics, PCB data, Gerber/ODB++, BOMs, mechanical drawings, GD&T, tolerance analyses and manufacturing specifications.
• Strong communication, organization, technical leadership and cross-functional problem-solving skills.

Preferred Qualifications:

• Knowledge of IPC-A-610, IPC J-STD-001, IPC-2221/2222 and IPC-7351, and experience in IATF 16949 environments.
• Experience with high-compute automotive electronics, large BGAs, high-speed interfaces, high-current power distribution, sealed assemblies and advanced thermal-management solutions.
• Experience with manufacturing process audits, line trials, equipment-capability reviews and run-at-rate assessments.
• Background in design-to-cost, should-cost, automation trade-offs, capital-equipment justification or production-data analytics.
• Six Sigma, manufacturing, quality or reliability certification.
• Familiarity with functional-safety and automotive cybersecurity development environments.

Our Benefits — Designed with You in Mind

Comprehensive Health & Well-being Coverage
From your very first day, you'll have access to medical, dental, vision, and prescription drug coverage — ensuring you and your family stay healthy and protected.

Generous Paid Time Off
We believe in work-life balance. That's why we offer: 17+ paid holidays, including shut-down from December 24th through New Years Day every year. Vacation, float & wellbeing days, sick time and fully paid parental leave when your family needs you most.

Competitive Retirement Savings Plans
We help you plan for the future with:

• An employer match on contributions to your 401k, Roth, and Catch-Up plans
• An employer contribution, even if you don't contribute

Income Protection & Insurance Options
Benefit from included and optional disability, life, and other insurance programs — because your peace of mind matters.

Company Vehicle Lease Program
Eligible employees and their immediate families can enjoy company vehicle lease options with included insurance, maintenance, and unlimited mileage. Plus, take advantage of exclusive discounts on Stellantis products.

Family Building Benefit
We proudly support all paths to parenthood- including fertility and infertility treatments, adoption services, and gestational surrogacy.

Support for Your Growth and Giving Back
We believe in investing in your future and your passions:

• Tuition reimbursement
• Student loan refinancing programs
• 18 paid volunteer hours each year to make a difference in your community

And so much more!
When you join us, you're not just building a career — you're joining a company that supports you, inside and outside of work.