Design Engineer IV (Automation Controls)

Investor Relations

Austin (TX)

On-site

USD 110,000 - 170,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Ultra Clean Technology in Austin, TX seeks a highly experienced Design Engineer IV/Senior PLC Programmer to lead industrial automation projects. The role focuses on Mitsubishi PLC programming, GT Designer3 HMI development, system architecture, and equipment commissioning for advanced manufacturing and test systems.

You will collaborate with electrical, mechanical, test and manufacturing teams to improve reliability, productivity and safety, perform FAT/SAT, mentor junior engineers, and ensure

Qualifications

  • Minimum 10 years hands-on experience in industrial automation and PLC programming.
  • Extensive knowledge of Mitsubishi PLC platforms (MELSEC, iQR, iQF).
  • Strong proficiency with GX Works (all versions) and GT Designer.
  • Experience developing and maintaining Mitsubishi GOT HMI applications.

Responsibilities

  • Design, develop, test, and maintain control systems using Mitsubishi PLC platforms and GX software.
  • Develop and maintain operator interfaces and HMI applications with GT Designer3 and Mitsubishi GOT.
  • Perform machine commissioning, startup, validation, and production support.
  • Troubleshoot and resolve equipment and communication issues on manufacturing systems.
  • Integrate PLC systems with servo drives, motion controllers, VFDs, networks, sensors, vision systems, and robotics.
  • Develop and maintain control system documentation.
  • Support continuous improvement initiatives focused on productivity, quality, reliability, safety.
  • Collaborate with cross-functional teams on equipment upgrades and new product introductions.
  • Conduct root cause analysis and implement corrective actions for equipment failures.
  • Participate in FAT, SAT, and design reviews.
  • Provide technical guidance and mentorship to junior engineers and maintenance personnel.
  • Ensure compliance with standards and regulations.

Skills

Industrial automation
Controls engineering
Machine integration
Manufacturing equipment support
Mitsubishi PLC programming
GT Designer3 HMI development
GX Works programming
Mitsubishi GOT development
Root cause analysis
Electrical schematics reading

Education

Bachelor's degree in Mechanical/Electrical/Mechatronics/Automation Engineering

Tools

GX Works
GT Designer3
MELSEC Mitsubishi PLC
Mitsubishi GOT
GOT HMI
Mitsubishi GX software

Job description

Job Details
Posting Details
  • Posted on November 18, 2026
Locations

Austin TX, Manor, TX 78653, USA

  • Engineering
  • Full-Time
  • Requisition #: DESIG023908
Description

Join UCT and be part of the fastest-growing sector in the world ! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a talented Design Engineer IV to join us in Austin, TX!

We are seeking a highly experienced Senior PLC Programmer / Automation Controls Engineer with a minimum of 10 years of hands‑on experience in industrial automation, controls engineering, machine integration, and manufacturing equipment support. The ideal candidate will possess extensive expertise in Mitsubishi PLC programming, GT Designer3 HMI development, control system architecture, and equipment commissioning.

This position will play a key role in the design, development, implementation, and support of automated manufacturing and test systems. The successful candidate will work closely with electrical, mechanical, test, and manufacturing engineering teams to improve equipment reliability, productivity, and overall system performance.

Experience with National Instruments LabVIEW and/or Mechatronics is considered a strong plus but is not required. Chemical delivery, including fluid process flow control, also a plus.

Essential Duties and Responsibilities:

  • Design, develop, test, and maintain control systems using Mitsubishi PLC platforms and Mitsubishi GX software.
  • Develop and maintain operator interfaces and HMI applications using GT Designer3 and Mitsubishi GOT platforms.
  • Perform machine commissioning, startup, validation, and production support activities.
  • Troubleshoot and resolve equipment, controls, and communication issues on manufacturing systems.
  • Integrate PLC systems with servo drives, motion controllers, VFDs, industrial networks, sensors, vision systems, and robotic equipment.
  • Develop and maintain control system documentation, including software revisions, control narratives, operating procedures, and technical specifications.
  • Support continuous improvement initiatives focused on productivity, quality, reliability, and safety.
  • Collaborate with cross-functional teams on equipment upgrades, capital projects, and new product introductions.
  • Conduct root cause analysis and implement corrective actions for equipment failures.
  • Participate in design reviews, Factory Acceptance Testing (FAT), and Site Acceptance Testing (SAT).
  • Provide technical guidance and mentorship to junior engineers, technicians, and maintenance personnel.
  • Ensure compliance with company engineering standards and applicable industry regulations.

Knowledge, Skills and Abilities:

  • Experience with industrial communication protocols
    • Ethernet/IP
    • Modbus TCP/IP
    • CC-Link
    • OPC UA
    • TCP/IP
    • RS-232 / RS-485
  • Ability to read, interpret and create electrical schematics, wiring diagrams, panel layouts, technical drawings, and P&ID schematics.
  • Strong troubleshooting, problem-solving, and analytical skills.
  • Excellent written and verbal communication skills.
  • Ability to manage multiple projects and priorities in a fast‑paced manufacturing environment.

Educational/Certification Requirement:

  • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Mechatronics Engineering, Automation Engineering, or a related technical field. Equivalent industry experience may be considered.

Experience Requirement:

Work Experience:

  • Minimum 10 years industrial automation and/or PLC programming experience
  • Advanced knowledge of Mitsubishi PLC Platforms including MELSEC, iQR Series and iQF series
  • Strong proficiency with GX Works (all versions), and GT Designer.
  • Experience developing and maintaining Mitsubishi GOT HMI applications.

Physical Demands and Working Conditions:

Criteria:

Work Environment:

  • Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.
  • Work is performed primarily in a standard office environment.

Physical Demands :

  • Ability to climb, stoop, kneel, crouch, reach, walk, push, pull and grasp.
  • Ability to lift up to 25 lbs. with or without assistance.
  • Ability to move arms, hands and fingers.
  • Required to have visual acuity to perform assigned tasks.

Environmental Exposure:

  • Ability to sit or stand for sustained periods of time.
  • Work in a manufacturing, office and/or cleanroom environment.
  • Subject to hazards including electrical current, moving mechanical parts, and exposure to chemicals.
  • Subject to frequent interruptions.
  • Required to wear personal protective equipment where applicable.

Overnight Travel:

  • Work may require out-of-town travel depending upon assignment (training and meeting)
  • Extended travel may be required but should not exceed 3 weeks per trip.

Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Controls and Automation Engineer
Controls and Automation Engineer

Automationtechies • Albuquerque (NM)

On-site
USD 80,000 - 110,000
Medical and dental insurance
401(k) matching
Employee Stock Ownership Plan (ESOP)
+3
Senior Controls / Systems Engineer
Senior Controls / Systems Engineer

PASONA N A, INC. • San Antonio (TX)

On-site
USD 120,000 - 130,000
ACTIVELY HIRING: Control Systems Engineer (2 Positions)
ACTIVELY HIRING: Control Systems Engineer (2 Positions)

JT Automation, LLC. • Windsor (CT)

On-site
USD 90,000 - 120,000
Automation Engineer
Automation Engineer

ImageTek Mfg • Springfield (VT)

On-site
USD 80,000 - 125,000
Controls Engineer
Controls Engineer

Unusual Machines, Inc. • Orlando (FL)

On-site
USD 100,000 - 120,000
Equity
Medical, Dental, Vision Benefits
401(k)
+3
Controls Engineer
Controls Engineer

Soap Creek Resources • Town of Wausau (WI)

On-site
USD 85,000 - 110,000
Sr. Electrical Controls Engineer
Sr. Electrical Controls Engineer

Applied Controls, Inc. • Exton (PA)

On-site
USD 110,000 - 140,000
Controls System Division Manager
Controls System Division Manager

Intuit Inc. • Auburn (NH)

On-site
USD 120,000 - 180,000
Controls Engineer
Controls Engineer

Autokiniton • Elkton (MI)

On-site
USD 70,000 - 90,000
Controls Engineer II
Controls Engineer II

Jennmar Automation • Wyoming (MI)

On-site
USD 90,000 - 140,000
Medical benefits (PPO) and wellness
Voluntary 401k plan with company match
Telemedicine services