Controls Technician - programming and building PLC panels

Genie Matthews and Associates

Newnan (GA)

On-site

USD 39,000 - 55,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

401K with matching
Major company benefits

Job summary

Genie Matthews and Associates in the Atlanta area seeks a Controls Technician on the day shift to design cells, install and program automated equipment, and keep systems running. You’ll build PLC panels, program them, and troubleshoot to ensure continuous production.

Required are 6+ years of related experience, PLC programming, and familiarity with sensors, analog controls, and safety circuits. OT is available and benefits are offered.

Qualifications

  • Minimum 6 years of related experience.
  • PLC programming in a production environment.
  • From-scratch machine process programming.
  • Wiring a 9-lead motor and stress testing windings.
  • Identify info from motor data plates for components.
  • Sensor types: PNP/NPN, loop-powered, and dry contact.
  • 4-20 mA and 0-10 V analog control signals.
  • Ladder logic troubleshooting and panel building.
  • Electrical experience and some robotics exposure.
  • Safety circuit integration experience.

Responsibilities

  • Assist in cell design and integration of controls for automated equipment.
  • Build PLC panels and program them to run and Commission.
  • Configure, test, operate, maintain, service, and troubleshoot controls.
  • Work with engineers and production to meet output goals.
  • Perform preventative maintenance and routine upgrades.

Skills

PLC programming
Pneumatics
Hydraulics
Ladder logic
Panel building
Electrical systems
Robotics experience
Safety circuits
Motor data plate analysis
Sensor familiarity

Tools

VFDs
Robot controllers

Job description

GENERAL SUMMARY:

Major and established company with a huge majority market share in what they manufacture and a good working culture has an opportunity on the day shift which is 7:00am - 3:30pm Monday thru Friday for a Controls Technician in the southwest suburban Atlanta area. The Controls Technician will participate in cell design, along with the integration of controls and installation of automated equipment. Will build PLC panels and then program them as well as get them up and running. The technician is responsible for assisting in configuring, testing, operating, maintaining, servicing, and troubleshooting controls, as well as other automated systems used in production. Some of the responsibilities of the role detailed below:

  • 1. Pneumatics: Install air logic controls from prints or schematics.
  • 2. Hydraulic: Troubleshoot hydraulic circuits containing the following components, check valves, accumulators, cylinders, flow controls, directional control valves, pressure control valves.
  • 3. Troubleshoot PLC systems using computer.
  • 4. Install, program, or repair programmable controllers, and robot controllers.
  • 5. Use knowledge of all fabrication equipment to complete maintenance tasks.
  1. Operating the equipment or overseeing the operation of equipment.
  2. Analyzing and categorizing events within the equipment.
  3. Working closely with engineers and production team to help achieve a desired output.
  4. Conducting preventative maintenance, such as routine upgrades and inspections.
  5. Repairing machine controls, systems, and tools as needed.
  6. Disassembling (or re-assembling) equipment to repair or replace defective parts.
  7. Training others to install, use, and service equipment.

The location is southwest suburban Atlanta, GA. There is an attractive hourly rate. OT is paid at time and 1/2. There are major company benefits and an attractive 401K with matching.

Needed experience:

  • desire at least 6 years of related experience
  • PLC programming with confidence in using context clues within the PLC program
  • comfortable with programming a machine process from scratch
  • comfortable with wiring a 9-lead motor, and stress testing the motor's windings
  • able to identify critical info. from a motors data plate and use the info for specing-out or programming new control components such as contactors, soft starters, and VFDs
  • familiarity with sensors: PNP, NPN, loop-powered, and dry contact
  • analog control familiarity: signal ranges of 4-20mA and 0-10 volts
  • ladder logic troubleshooting
  • panel building
  • electrical experience
  • some robotic experience
  • safety circuit integration
  • must be authorized to work indefinitely in the USA without sponsorship
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Confident Search Consultants • Newnan (GA)

On-site
USD 33,000 - 47,000
401K with matching
Overtime pay 1.5x
Major benefits package
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Meritas Advisory Group, LLC • Newnan (GA)

On-site
USD 34,000 - 55,000
401K with matching
Major benefits
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Talent Match Recruiting • Newnan (GA)

On-site
USD 34,000 - 55,000
401K with company match
Excellent benefits package
Overtime paid 1.5x
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Top Dog Recruiting • Newnan (GA)

On-site
USD 34,000 - 55,000
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Workforce Recruiter • Newnan (GA)

On-site
USD 39,000 - 52,000
401K with company match
Attractive benefits package
Overtime paid at time and a half
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Key People • Newnan (GA)

On-site
USD 34,000 - 52,000
Competitive hourly rate
OT paid time and a half
Excellent company benefits
+1
Controls Technician – programming and building PLC panels
Controls Technician – programming and building PLC panels

SPG • Newnan (GA)

On-site
USD 39,000 - 52,000
401K with matching
OT paid at time and a half
Company benefits
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Workforce Recruiter • Villa Rica (GA)

On-site
USD 39,000 - 58,000
401K with matching
OT pay time and a half
Benefits package
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Confident Search Consultants • Villa Rica (GA)

On-site
USD 39,000 - 52,000
401K with matching
OT pay 1.5x
Benefits
Controls Technician - programming and building PLC panels
Controls Technician - programming and building PLC panels

Meritas Advisory Group, LLC • Villa Rica (GA)

On-site
USD 34,000 - 55,000
401K with matching
Benefits package
OT paid at time and a half