Composite Technician (Fiberglass Technician V)

The MIL Corporation; Maryland; On-site; USD 62,000 - 69,000; Full time

Job summary

The MIL Corporation is seeking a skilled Composite Technician (Fiberglass Technician V) to support fabrication, repair, modification, restoration, and maintenance of fiberglass and composite structures for DoD programs at NAWCAD Webster Outlying Field in Maryland. The role involves hands-on repair and fabrication, adherence to engineering drawings, and use of resins, mats, molds, and finishing techniques in shop and field environments.

Onsite schedule with potential compressed work schedule.

Qualifications

• Minimum of 15 years of hands-on experience performing fiberglass fabrication, composite layup, laminating, restoration, assembly, modification, or repair
• Experience using fiberglass repair materials, resins, catalysts, fillers, and reinforcing fabrics
• Experience operating pneumatic grinders, sanders, cutting tools, polishers, and other fabrication equipment
• Ability to read and interpret engineering drawings, blueprints, sketches, and technical instructions
• Knowledge of fiberglass layup techniques, bonding methods, curing processes, and surface-finishing procedures
• Familiarity with workplace safety requirements involving resins, solvents, adhesives, power tools, and personal protective equipment
• Ability to identify manufacturing defects such as voids, delamination, bubbles, cracks, and surface imperfections
• Ability to lift up to 50 pounds without assistance
• Ability to work indoors and outdoors in varying environmental conditions
• Strong attention to detail and commitment to quality workmanship
• Valid driver's license and ability to operate company or government vehicles, as required

Responsibilities

• Provide day-to-day guidance, direction, training, mentorship, and technical support to less experienced technicians.
• Inspect fiberglass and composite structures for damage, defects, wear, and dimensional discrepancies.
• Repair damaged fiberglass components by removing damaged material, preparing surfaces, and restoring structural integrity using approved repair methods.
• Cut, trim, grind, sand, shape, and finish fiberglass materials using pneumatic and electric tools.
• Mix polyester, epoxy, vinyl ester, or other approved resins, catalysts, and hardeners in accordance with technical specifications.
• Apply fiberglass matting, cloth, and reinforcing materials to repair areas and molds to specified thicknesses and contours.
• Manufacture, assemble, and repair fiberglass molds, tooling, and support fixtures as required.
• Apply body fillers, fairing compounds, sealants, primers, and protective coatings to restore surfaces and achieve required finishes.
• Remove air pockets, wrinkles, and imperfections using rollers, squeegees, and hand finishing techniques.
• Cure composite materials using ambient, heated, or controlled curing processes.
• Inspect completed work for conformance to technical drawings, work instructions, and quality requirements.
• Read and interpret engineering drawings, sketches, specifications, technical manuals, and work packages.
• Perform dimensional measurements using standard precision measuring instruments.
• Fabricate replacement fiberglass panels and structural components when repairs are not practical.
• Maintain work areas, tools, materials, and equipment in a clean and safe condition.
• Document repairs, modifications, and fabrication activities in accordance with program requirements.
• Collaborate with engineers, technicians, quality personnel, and customer representatives to resolve technical issues.
• Support prototyping, reverse-engineering, lifecycle extension, and sustainment efforts for customer systems.
• Perform other duties as assigned in support of customer mission requirements.

Job description

The MIL Corporation is seeking a skilled Composite Technician (Fiberglass Technician V) to support fabrication, repair, modification, restoration, and maintenance activities involving fiberglass and composite structures, components, equipment, and support systems. This position performs hands‑on fiberglass repair and fabrication work on military, aerospace, automotive, marine, range‑support, and prototype systems in support of Department of Defense (DoD) programs at NAWCAD Webster Outlying Field (WOLF), St. Inigoes, Maryland.

The selected candidate will utilize industry‑standard fiberglass repair techniques, hand and power tools, composite materials, molds, resins, fillers, and finishing processes to restore and manufacture fiberglass components according to engineering drawings, specifications, and customer requirements. Work is performed in both shop and field environments while maintaining strict compliance with safety, quality, and technical standards.

This position currently requires an onsite schedule and is eligible for Compressed Work Schedule (CWS). Schedule is subject to change based on company/contract requirements.

Responsibilities

• Provide day‑to‑day guidance, direction, training, mentorship, and technical support to less experienced technicians.
• Inspect fiberglass and composite structures for damage, defects, wear, and dimensional discrepancies.
• Repair damaged fiberglass components by removing damaged material, preparing surfaces, and restoring structural integrity using approved repair methods.
• Cut, trim, grind, sand, shape, and finish fiberglass materials using pneumatic and electric tools.
• Mix polyester, epoxy, vinyl ester, or other approved resins, catalysts, and hardeners in accordance with technical specifications.
• Apply fiberglass matting, cloth, and reinforcing materials to repair areas and molds to specified thicknesses and contours.
• Manufacture, assemble, and repair fiberglass molds, tooling, and support fixtures as required.
• Apply body fillers, fairing compounds, sealants, primers, and protective coatings to restore surfaces and achieve required finishes.
• Remove air pockets, wrinkles, and imperfections using rollers, squeegees, and hand finishing techniques.
• Cure composite materials using ambient, heated, or controlled curing processes.
• Inspect completed work for conformance to technical drawings, work instructions, and quality requirements.
• Read and interpret engineering drawings, sketches, specifications, technical manuals, and work packages.
• Perform dimensional measurements using standard precision measuring instruments.
• Fabricate replacement fiberglass panels and structural components when repairs are not practical.
• Maintain work areas, tools, materials, and equipment in a clean and safe condition.
• Document repairs, modifications, and fabrication activities in accordance with program requirements.
• Collaborate with engineers, technicians, quality personnel, and customer representatives to resolve technical issues.
• Support prototyping, reverse‑engineering, lifecycle extension, and sustainment efforts for customer systems.
• Perform other duties as assigned in support of customer mission requirements.

Travel

Occasional local and regional travel may be required to support customer sites, testing activities, installations, or field repairs.

Travel is expected to be less than 10%.

Ability to support occasional off‑site and shipboard work assignments may be required.

Required Qualifications

• Minimum of 15 years of hands‑on experience performing fiberglass fabrication, composite layup, laminating, restoration, assembly, modification, or repair
• Experience using fiberglass repair materials, resins, catalysts, fillers, and reinforcing fabrics
• Experience operating pneumatic grinders, sanders, cutting tools, polishers, and other fabrication equipment
• Ability to read and interpret engineering drawings, blueprints, sketches, and technical instructions
• Knowledge of fiberglass layup techniques, bonding methods, curing processes, and surface‑finishing procedures
• Familiarity with workplace safety requirements involving resins, solvents, adhesives, power tools, and personal protective equipment
• Ability to identify manufacturing defects such as voids, delamination, bubbles, cracks, and surface imperfections
• Ability to lift up to 50 pounds without assistance
• Ability to work indoors and outdoors in varying environmental conditions
• Strong attention to detail and commitment to quality workmanship
• Valid driver's license and ability to operate company or government vehicles, as required

Desired Qualifications

• Experience supporting U.S. Navy, Department of Defense, aviation, maritime, or test and evaluation programs
• Experience with composite materials used in aerospace, unmanned systems, radomes, antennas, or military equipment
• Formal training in fiberglass/composite fabrication, automotive body repair, aircraft structures, or related trades
• Experience working within a quality management system or documented manufacturing environment
• Knowledge of vacuum bagging, infusion processes, mold fabrication, and advanced composite repair techniques
• Welding, sheet metal, machining, or multi‑trade fabrication experience
• Experience supporting prototype development and low‑rate production activities
• Ability to estimate labor, material requirements, and repair approaches from technical documentation

Education

High School Diploma or GED required

Trade school certificate, technical training, military occupational specialty training, or Associate's degree in a related field is preferred

Professional certifications related to composites, fiberglass fabrication, manufacturing, or automotive body repair are a plus

Clearance

All applicants for this position must be able to obtain and maintain a Secret clearance; please note that the clearance process takes into account financial background aspects.

Compensation

The SCA (Service Contract Act) role at The MIL Corporation is subject to the regulations and guidelines set forth by the U.S. Department of Labor. As an SCA position, it is classified as a service contract and is subject to specific wage determinations and benefit requirements mandated by the government.

The compensation and benefits for the SCA role at The MIL Corporation will be in accordance with the prevailing wage rates and benefits specified by the Department of Labor for the specific job classification and location. The current rate is $45.00 - $50.00 per hour. Final salary for this position is determined based on factors such as individual qualifications, education, experience, and contractual limitations.

Why MIL?

The MIL Corporation (MIL) is a dynamic workforce of industry professionals who deliver world‑class solutions in cyber, engineering, financial management, and information technology – and we are looking for candidates like you! MIL offers opportunities for professionals at all stages of their careers, from early‑career candidates to experienced industry professionals. We are known for a collaborative, people‑first culture where employees are supported, valued, and encouraged to grow. This commitment to our people and our work is reflected in the industry and workplace awards MIL has received over the years.

• 2017 - 2025 Top Workplaces Award, Greater Washington Area (The Washington Post)
• 2018 - 2025 Certified Great Workplace, Great Place to Work®
  • 2021 - 2025, Best Workplaces in Consulting & Professional Services™
  • 2021 Fortune Best Workplaces for Millennials™
  • 2018 Fortune, Great Place to Work: Best Place to Work for Diversity
• 2017, 2020 - 2025 Top Workplace Award, South Carolina (Greenville Business Magazine, Columbia Business Monthly, and Charleston Business Magazine)
• 2025 Corporate Partnership Award, Association of Fundraising Professionals, Maryland Chapter
• 2024 Patriot Award,Employer Support of the Guard and Reserve (ESGR), Department of Defense
• 2022 Freedom Award, Employer Support of the Guard and Reserve (ESGR), Department of Defense
• 2018, Above & Beyond Award, Employer Support of the Guard and Reserve (ESGR), Department of Defense

If your goal is to help the federal government deploy leading technologies, improve financial management, or defend the nation in cyberspace, MIL welcomes you. Become a part of something greater, where you, the people, make the difference.

Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.