CNC Operator Night shift

Drake-Williams Steel, Inc.

Omaha (NE)

On-site

USD 26,000 - 41,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Drake-Williams Steel, Inc. in Omaha, NE is seeking a CNC Operator for the night shift to fabricate structural steel parts per cutting lists and shop drawings, ensuring adherence to DWS quality requirements and production schedules.

Responsibilities include identifying shapes and tolerances, adjusting machines for precise dimensions, and operating forklifts and overhead cranes. 40-hour weeks with potential overtime; high school diploma and steel experience preferred.

Qualifications

  • High school diploma or equivalent.
  • Minimum six months experience in steel manufacturing.
  • Ability to read shop drawings and cutting lists.
  • Ability to operate forklifts and overhead cranes.
  • Commitment to safety procedures and quality standards.
  • Ability to multi-task and meet priorities.

Responsibilities

  • Identify steel shapes, sizes, and tolerances.
  • Fabricate parts per cut lists and shop drawings.
  • Set up and adjust machines for accurate dimensions.
  • Move materials using forklifts and cranes.
  • Identify errors in cut lists and drawings early.
  • Attend meetings and work scheduled hours.

Skills

Shop drawings reading
Measurement accuracy
Machine setup
Safety procedures
Forklift operation
Crane operation
Multi-tasking

Education

High School diploma or equivalent

Tools

Pencil
Square
Tape Measure
Markers
Ball Peen Hammer
Wire Brushes
4" Grinder
SledgeHammer
Grab Hooks
Vise Grips
Allen Wrenches
Pry-Bar
C-Clamps
Band Cutters
Chains

Job description

CNC Operator Night Shift

Structural - Omaha, NE

Overview

Salary Range $19.00 - $30.00 Hourly Position Type Full Time Job Shift 2nd Shift [3:30 P.M.- 1:45 A.M.]

Description

Primary Purpose of this Position:

Fabricate parts for structural fabrication, Service Center, and misc. steel assemblies per cutting lists, shop drawings, and DWS quality requirements.

Essential Job Functions
  • Identify steel shapes, sizes, and mill tolerances.
  • Fabricate material as trained and instructed.
  • Fabricate beams, tubes, angle, channel, bar grating, pipe, plate, or rounds according to the dimensions shown on cut lists and shop drawings, AISC code requirements for structural steel, and machine capabilities.
  • Make adjustments to machine to ensure accurate dimensions as shown on the shop drawings.
  • Identify cut list and shop drawing errors and discrepancies before or during early stages of fabrication.
  • Operate forklifts, jib cranes, overhead cranes, conveyors, and transfers in order to move materials.
  • Any other duties assigned by management.
  • Attend all meetings as required by management.
  • Consistently and reliably works scheduled hours at assigned locations.
Qualifications

Knowledge, Skills and Abilities:

  • Ability to read, write, and perform higher arithmetic computations involving addition, subtraction, multiplication, and division of whole numbers, decimals and fractions.
  • Ability to understand and carry out semi-complicated verbal and written instructions.
  • Ability to effectively communicate with co-workers, supervisors and managers.
  • Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion.
  • Skill in using auto measurer, tape measure, or 1\" rule.
  • Ability to pass a Drake-Williams Steel administered test that covers shop drawing interpretation, fractional number calculations, basic geometry, etc.
  • Ability to interpret, understand and utilize cutting lists, shop orders, and shop drawings.
  • Ability to use a computer for cut-lists and inventory purposes.
  • Ability to possess pride in own workmanship; demonstrate attention to detail, and work safely.
  • Ability to operate forklifts and overhead cranes in a safe and proper manner. Use and understand industry and Drake-Williams Steel adopted hand signals used for crane operations.
  • Perform minor mechanical tasks on machine (blade changes, cleaning, etc.)
  • Ability to follow inventory procedures.
  • Ability to multi-task.
Physical Demands
  • Stand
    FREQUENTLY over the course of the 8 to 12 hour work shift.
  • Walk
    OCCASIONALLY to FREQUENTLY over the course of the 8 to 12 hour work shift. The distances walked will range from a distance of a few feet to 60 foot.
  • Sit
    only during the break and lunch periods. Rarely one will be able to sit while cutting material.
  • Lift
    weights up to 20 pounds from floor to chest CONTINUOUSLY, which includes the various tools utilized in the process of performing the usual work duties.
  • Lift
    weights up to 35 pounds from floor to waist FREQUENTLY during the 8 to 12 hour work shift
  • Lift
    weights up to 60 pounds from floor to waist OCCASIONALLY during the work shift. Jib cranes and overhead cranes are available for the employee's assistance with lifting.
  • Carry
    weights noted above distances ranging from a few feet to 60 foot.
  • Climb
    OCCASIONALLY onto or over the conveyors.
  • Stoop or crouch
    OCCASIONALLY while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job.
  • Kneel
    in the commission of job duties OCCASIONALLY, depending upon the job.
  • Crawl
    RARELY up to 10 feet to access tools, materials, etc.
  • Reach forward
    OCCASIONALLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension.
  • Reach overhead
    OCCASIONALLY to guide material attached to the cranes and to attach the chains from the crane to the material.
  • Push and pull
    drawers open OCCASIONALLY to FREQUENTLY to retrieve tools. Employee will OCCASIONALLY push material attached to a jib crane or overhead crane to properly guide into place. Force varies up to 35 pounds.
  • Push
    material OCCASIONALLY into machine for fabrication. (SHEAR)
  • Gross finger dexterity
    skills required to operate the various tools and equipment utilized in the course of standard job duties. Fine finger dexterity is not required.
Non-Material Handling Demands
  • Employee is expected to work 40 hours a week. However, hours including overtime and weekends may be required based on Drake-Williams Steel's needs.
  • Hear sufficiently to be aware of safety issues.
  • Visual ability to read and interpret shop drawings. Safety glasses are required in the shop area.
  • Exposure to heat, cold, wet and humid conditions in the shop area OCCASIONALLY.
  • Exposure to fumes, odors and dusts in the shop area OCCASIONALLY.
  • Exposure to solvents, greases, oils, and coolants OCCASIONALLY.
  • Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats.
Tools Required
  • Pencil
  • Square
  • Tape Measure
  • Markers
  • Ball Peen Hammer
  • Wire Brushes
  • 4\" Grinder
  • SledgeHammer
  • Grab Hooks
  • Vise Grips
  • Allen Wrenches
  • Pry-Bar
  • C-Clamps
  • Band Cutters
  • Chains
Machines Utilized
  • Saw
  • Overhead Crane
  • Jib Crane
  • Pallets
  • Transfers
  • Brake
  • Blaster
  • Punch
  • Shear
  • Forklifts
Experience And Education Required
  • High School degree or equivalent.
  • Minimum of six months of experience in a steel manufacturing environment.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Night shift laser operator
Night shift laser operator

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 25,000 - 39,000
Day shift laser operator
Day shift laser operator

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 42,000 - 52,000
Night shift laser operator
Night shift laser operator

DW Steel • Omaha (NE)

On-site
USD 26,000 - 41,000
Day shift laser operator
Day shift laser operator

DW Steel • Omaha (NE)

On-site
USD 26,000 - 41,000
Material Handler Night Shift
Material Handler Night Shift

DW Steel • Omaha (NE)

On-site
USD 26,000 - 41,000
Misc Metals Fitter/Welder Night shift
Misc Metals Fitter/Welder Night shift

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 40,000 - 60,000
Material Handler Day shift
Material Handler Day shift

DW Steel • Omaha (NE)

On-site
USD 26,000 - 41,000
Structural Fitter
Structural Fitter

SteelCon Inc. • Missouri

On-site
USD 52,000 - 76,000
CNC Machine Operator (Pedd) - 2nd Shift
CNC Machine Operator (Pedd) - 2nd Shift

MICA Steelworks • Haltom City (TX)

On-site
USD 30,000 - 32,000
401(k) matching
Dental insurance
Employee assistance program
+6
Fabricator - 1st Shift
Fabricator - 1st Shift

Knowles Corporation • Liberty (SC)

On-site
USD 22,000 - 32,000