CNC Machinist III - 1st Shift

Karman Space & Defense

Arlington (WA)

On-site

USD 62,000 - 76,000

Full time

2 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Karman Space & Defense in Arlington, VA is seeking a Machinist III to independently set up and operate advanced 3-, 4-, and 5-axis CNC centers on high-precision aerospace hardware. You will machine Inconel, titanium, stainless steel, copper, and other exotic alloys, perform GD&T interpretation, and provide mentorship while collaborating with Programming, Engineering, and Quality teams.

This role offers an hourly wage of $45–$55 USD and is a key part of ensuring mission-critical components meet

Qualifications

  • 5+ years CNC machining experience in a precision manufacturing environment.
  • Ability to independently set up and operate complex 3-, 4-, and 5-axis CNC machining centers with minimal supervision.
  • Experience machining one-of-one, prototype, or low-volume, high-value components.
  • Experience machining Inconel, titanium, stainless steel, copper, and other exotic alloys.
  • Conversational programming using Fanuc and/or Siemens controls.
  • Basic CAM experience using Mastercam, ESPRIT, CATIA, or comparable software.
  • Experience working within AS9100 or equivalent quality management system.
  • Strong blueprint-reading skills and practical GD&T knowledge.
  • Strong knowledge of cutting tools, workholding, fixturing, probing, feeds, and speeds.
  • Proficiency using precision measuring and inspection equipment.
  • Ability to exercise sound judgment and maintain composure while machining one-of-one and high-value aerospace hardware.
  • Strong verbal and written communication skills.

Responsibilities

  • Independently set up and operate complex 3-, 4-, and 5-axis CNC machining centers.
  • Prove out setups for new or unproven components in collaboration with Programming and Engineering.
  • Machine one-of-one, prototype, and low-volume flight hardware using Inconel, titanium, stainless steel, copper, and other exotic alloys.
  • Perform conversational programming and controller-level G-code and M-code edits using Fanuc and/or Siemens controls.
  • Install and qualify fixtures, workholding, cutting tools, probes, machine datums, and related setup components.
  • Interpret engineering drawings, models, setup documentation, and Geometric Dimensioning and Tolerancing (GD&T) requirements.
  • Perform first-piece and in-process dimensional verification while monitoring tool wear, machining conditions, and process stability.
  • Independently troubleshoot machining, tooling, setup, and dimensional issues in partnership with Programming, Engineering, and Quality.
  • Exercise stop-work authority when conditions may place personnel, equipment, or hardware at risk.
  • Provide technical guidance and mentorship to less-experienced machinists.

Skills

5+ years CNC machining experience
Independent setup and operation of 3-,
Experience machining one-of-one / low‑
Inconel, titanium, stainless steel,  c
Conversational programming with Fanuc/
Mastercam / ESPRIT / CATIA CAM
AS9100 quality management system
GD&T and blueprint-reading
Cutting tools, fixturing, probing
Precision measuring and inspection
Strong verbal and written comms

Education

High school diploma or equivalent

Tools

Fanuc controls
Siemens controls
Mastercam
ESPRIT
CATIA

Job description

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.

This role is part of our Space and Launch business, which has contributed to the nation’s space programs for decades by delivering complete solutions from concept to flight. We enable successful space operations with mission-critical technology supporting every step from first launch to final landing, including launch vehicle subsystems, propulsion systems, aerodynamic and interstage systems, and payload protection and deployment. Our high-performance solutions are engineered to operate in the most extreme environments and meet precise mission requirements.

As a Machinist III, you will independently set up and operate advanced 3-, 4-, and 5-axis CNC machining centers to manufacture complex, mission-critical aerospace hardware. You will own machining execution from setup through dimensional verification, frequently working on one-of-one and low-volume components manufactured from difficult and high-value materials. This position requires advanced machining judgment, strong troubleshooting capabilities, and the ability to work collaboratively with Programming, Engineering, and Quality. The Machinist III reports to the Machine Shop Foreman and provides technical guidance to less-experienced machinists.

Responsibilities
  • Independently set up and operate complex 3-, 4-, and 5-axis CNC machining centers.
  • Prove out setups for new or unproven components in collaboration with Programming and Engineering.
  • Machine one-of-one, prototype, and low-volume flight hardware using Inconel, titanium, stainless steel, copper, and other exotic alloys.
  • Perform conversational programming and controller-level G-code and M-code edits using Fanuc and/or Siemens controls.
  • Install and qualify fixtures, workholding, cutting tools, probes, machine datums, and related setup components.
  • Interpret engineering drawings, models, setup documentation, and Geometric Dimensioning and Tolerancing (GD&T) requirements.
  • Perform first-piece and in-process dimensional verification while monitoring tool wear, machining conditions, and process stability.
  • Independently troubleshoot machining, tooling, setup, and dimensional issues in partnership with Programming, Engineering, and Quality.
  • Exercise stop-work authority when conditions may place personnel, equipment, or hardware at risk.
  • Provide technical guidance and mentorship to less-experienced machinists.
Required Qualifications
  • High school diploma or equivalent.
  • 5+ years of CNC machining experience in a precision manufacturing environment.
  • Demonstrated ability to independently set up and operate complex 3-, 4-, and 5-axis CNC machining centers with minimal supervision.
  • Experience machining one-of-one, prototype, or low-volume, high-value components.
  • Experience machining Inconel, titanium, stainless steel, copper, and/or other exotic alloys.
  • Conversational programming experience using Fanuc and/or Siemens controls.
  • Basic CAM experience using Mastercam, ESPRIT, CATIA, or comparable software.
  • Experience working within an AS9100 or equivalent quality management system.
  • Strong blueprint-reading skills and practical knowledge of GD&T.
  • Strong knowledge of cutting tools, workholding, fixturing, probing, feeds, and speeds.
  • Proficiency using precision measuring and inspection equipment.
  • Ability to exercise sound judgment and maintain composure while machining one-of-one and high-value aerospace hardware.
  • Strong verbal and written communication skills.
Preferred Qualifications
  • Experience with large-format 5-axis machining.
  • Experience machining additively manufactured components.
  • Previous experience mentoring or providing technical guidance to less-experienced machinists.
  • Advanced experience troubleshooting complex machining, tooling, dimensional, and process-related issues.

Hourly Rate

$45 - $55 USD

Karman Space and Defense is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by applicable federal, state, or local law.

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.

As set forth in Karman Space & Defense’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist - 1st Shift
CNC Machinist - 1st Shift

Karman Space & Defense • Seattle (WA)

On-site
USD 45,000 - 58,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+2
CNC Machinist II
CNC Machinist II

Karman Space & Defense • Wilsonville (OR)

On-site
USD 60,000 - 75,000
Medical insurance
Dental insurance
Vision insurance
+5
CNC Programmer - 1st Shift
CNC Programmer - 1st Shift

Karman Space & Defense • Salt Lake City (UT)

On-site
USD 65,000 - 90,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
Machine Shop Lead
Machine Shop Lead

Karman Space & Defense • South El Monte (CA)

On-site
USD 52,000 - 62,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
CNC Machinist - 2nd Shift
CNC Machinist - 2nd Shift

Karman Space & Defense • Salt Lake City (UT)

On-site
USD 30,000 - 39,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
CNC Machinist II
CNC Machinist II

Karman Space & Defense • Arlington (WA)

On-site
USD 60,000 - 90,000
Health insurance
Dental insurance
Vision insurance
+6
CMM Programmer
CMM Programmer

Karman Space & Defense • Wilsonville (OR)

On-site
USD 75,000 - 105,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
CNC Machinist - 1st Shift
CNC Machinist - 1st Shift

Karman Space & Defense • Mukilteo (WA)

On-site
USD 45,000 - 58,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
CNC Machinist 5 Axis - 2nd Shift
CNC Machinist 5 Axis - 2nd Shift

Karman Space & Defense • Santa Ana (CA)

On-site
USD 37,000 - 41,000
Medical insurance
401(k)
Paid time off
+5
CNC Machinist
CNC Machinist

Karman Space & Defense • Arlington (WA)

On-site
USD 48,000 - 55,000
Medical, dental, vision insurance
401(k) with company match
Paid time off
+4