CNC Machinist

Smith & Wesson; Houlton (ME); On-site; USD 28,000 - 40,000; Full time

Job summary

Smith & Wesson in our manufacturing facility seeks an experienced machinist to fabricate components for pistols, revolvers and rifles using CNC mills and lathes. You will perform setup, load feeds, verify settings and maintain production logs.

Requirements include 3–5 years CNC experience, familiarity with Fanuc/Mazak/Okuma controls, and strict adherence to safety protocols. This is a 1st shift, 12-hour rotating schedule with emphasis on quality and productivity.

Qualifications

• High School/GED required; prefer Associate's degree and/or equivalent experience in related discipline
• 3-5 years related experience is required (typically a CNC certification requires completion of a formal apprenticeship or equivalent training)
• CNC certification preferred
• Extensive knowledge of CNC controls (ie: Fanuc, Yaznac, Mazak, Okuma), with experience operating Mazak, Mori Seiki, Matsuura, Okuma, Haas, Tsugami (Swiss Turn), and Citizen Screw machines
• Experience running CNC vertical and horizontal milling machines with 4 and 5 axes, and lathes with 7 and 9 axes
• Experience with off-line tool setter (Parlec helpful)
• Ability to interpret CMM reports and adjust CNC accordingly
• Knowledge of SPC (Statistical Process Control) and the ability to adjust machines to a chart
• Must have math skills equal to that used in a machining environment

Responsibilities

• Performing all general/intermediate machinist duties and responsibilities
• 12 hour shifts on a rotating 2-week schedule
• Setting-up CNC equipment
• Loading feed mechanism
• Verifying settings adjusting and CNC accordingly
• Maintaining safe operations by adhering to safety procedures and regulations
• Maintaining equipment by completing preventive maintenance requirements
• Managing and/or training a co-worker
• Ability to manage a normal work load operating at least 12 CNC machines
• Documenting actions by completing production and quality logs
• Working with floor supervisors and team leaders to maintain production schedules and limit waste
• Working with Quality Control personnel to maintain the highest quality product

Skills

CNC machining

Machinist

Set-up

Quality control

Safety procedures

Documentation

Education

High School Diploma or GED

CNC Certification Preferred

Tools

Mazak

Fanuc

Okuma

Parlec

Job description

Position Overview:

Perform machinist duties associated with production of components for pistols, revolvers and rifles. Operate computer numerical controlled machines to fabricate parts. Machinists are expected to have achieved advanced skills and be able to perform complex production work in the following areas: set-up, tech support, and advanced CNC machining.

Position Pay: $24.44/hr

Shift: 1st shift (6:00 am - 6:00 pm - A Team Rotation)

Essential Duties and Responsibilities:

• Performing all general/intermediate machinist duties and responsibilities
• 12 hour shifts on a rotating 2-week schedule.
• Setting-up CNC equipment
• Loading feed mechanism
• Verifying settings adjusting and CNC accordingly
• Maintaining safe operations by adhering to safety procedures and regulations
• Maintaining equipment by completing preventive maintenance requirements
• Managing and/or training a co-worker (most positions have a loader/unloader as a helper)
• Ability to manage a normal work load operating at least 12 CNC machines
• Documenting actions by completing production and quality logs
• Working with all floor supervisors and team leaders, making every effort to maintain production schedules, and limiting waste, scrap, re-works or turn backs
• Working with Quality Control personnel to maintain the highest quality product

NOTE: This list presents only the principal duties of the position and is not intended to be comprehensive. Other duties and responsibilities may be assigned as dictated by the business needs and conditions.

Education and Experience:

• High School/GED required; prefer Associate's degree and/or equivalent experience in related discipline
• 3-5 years related experience is required (typically a CNC certification requires completion of a formal apprenticeship or equivalent training)
• CNC certification preferred
• Extensive knowledge of CNC controls (ie: Fanuc, Yaznac, Mazak, Okuma), with experience operating Mazak, Mori Seiki, Matsuura, Okuma, Haas, Tsugami (Swiss Turn), and Citizen Screw machines
• Experience running CNC vertical and horizontal milling machines with 4 and 5 axes, and lathes with 7 and 9 axes
• Experience with off-line tool setter (Parlec helpful)
• Ability to interpret CMM reports and adjust CNC accordingly
• Knowledge of SPC (Statistical Process Control) and the ability to adjust machines to a chart
• Must have math skills equal to that used in a machining environment

Competencies and Skills:

• Must have and demonstrate excellent conceptual skills, process improvement, verbal communication, functional and technical skills, controls and instrumentation skills, supply management, tooling, coordination, inventory control, attention to detail, and judgment
• Must have working command of the English language
• Must be able to read, write and interpret the English language
• Must be able to communicate in English verbally and in writing (basic verbal instructions, simple written memos and instructions)
• Basic computer skills preferred

Physical Demands:

• 12 hour shifts on a rotating 2-week schedule.
• Must be able to sit, stand, walk, climb, bend, stoop, push, pull, carry, reach, twist
• Must be able to lift up to 30 pounds

NOTE: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Environment and Personal Protective Equipment:

Within the Smith & Wesson manufacturing facility, employees may be exposed to manufacturing noise, airborne liquid chemicals, fine particulate dust, ambient temperatures, and industrial lighting. Work environment is similar to most manufacturing operations. May be exposed to excessive noise, temperatures, hazards associated with working around moving machinery, work in confined quarters, exposure to vibrations and shop lighting, continuous exposure to hot temperatures, may be humid, odors, dust, continuous exposure to mechanical hazards, and occasional exposure to chemical hazards.

The following Personal Protective Equipment is required:

• Safety glasses with side shields and hearing protection required when on manufacturing floor
• Approved safety footwear

The use of additional personal protective equipment (PPE) may be required when a job task(s) is being completed in or around your assigned department or in another department, this includes safety eyewear, hearing protection, and safety footwear

RECRUITING FRAUD ALERT

At Smith & Wesson, your personal information and online safety are our top priorities. Our recruiters will only direct candidates to apply through our official career page www.smith-wesson.com/careers. We will never request payments, financial account details, or sensitive information such as Social Security numbers. If you’re unsure about the legitimacy of a message, please contact [e-mail] for verification.

Revised 10/5/26

Qualifications

Position Overview:

Perform machinist duties associated with production of components for pistols, revolvers and rifles. Operate computer numerical controlled machines to fabricate parts. Machinists are expected to have achieved advanced skills and be able to perform complex production work in the following areas: set-up, tech support, and advanced CNC machining.

Essential Duties and Responsibilities:

• Performing all general/intermediate machinist duties and responsibilities
• 12 hour shifts on a rotating 2-week schedule.
• Setting-up CNC equipment
• Loading feed mechanism
• Verifying settings adjusting and CNC accordingly
• Maintaining safe operations by adhering to safety procedures and regulations
• Maintaining equipment by completing preventive maintenance requirements
• Managing and/or training a co-worker (most positions have a loader/unloader as a helper)
• Ability to manage a normal work load operating at least 12 CNC machines
• Documenting actions by completing production and quality logs
• Working with all floor supervisors and team leaders, making every effort to maintain production schedules, and limiting waste, scrap, re-works or turn backs
• Working with Quality Control personnel to maintain the highest quality product

NOTE: This list presents only the principal duties of the position and is not intended to be comprehensive. Other duties and responsibilities may be assigned as dictated by the business needs and conditions.

Education and Experience:

• High School/GED required; prefer Associate's degree and/or equivalent experience in related discipline
• 3-5 years related experience is required (typically a CNC certification requires completion of a formal apprenticeship or equivalent training)
• CNC certification preferred
• Extensive knowledge of CNC controls (ie: Fanuc, Yaznac, Mazak, Okuma), with experience operating Mazak, Mori Seiki, Matsuura, Okuma, Haas, Tsugami (Swiss Turn), and Citizen Screw machines
• Experience running CNC vertical and horizontal milling machines with 4 and 5 axes, and lathes with 7 and 9 axes
• Experience with off-line tool setter (Parlec helpful)
• Ability to interpret CMM reports and adjust CNC accordingly
• Knowledge of SPC (Statistical Process Control) and the ability to adjust machines to a chart
• Must have math skills equal to that used in a machining environment

Competencies and Skills:

• Must have and demonstrate excellent conceptual skills, process improvement, verbal communication, functional and technical skills, controls and instrumentation skills, supply management, tooling, coordination, inventory control, attention to detail, and judgment
• Must have working command of the English language
• Must be able to read, write and interpret the English language
• Must be able to communicate in English verbally and in writing (basic verbal instructions, simple written memos and instructions)
• Basic computer skills preferred

Physical Demands:

• 12 hour shifts on a rotating 2-week schedule.
• Must be able to sit, stand, walk, climb, bend, stoop, push, pull, carry, reach, twist
• Must be able to lift up to 30 pounds

NOTE: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Environment and Personal Protective Equipment:

Within the Smith & Wesson manufacturing facility, employees may be exposed to manufacturing noise, airborne liquid chemicals, fine particulate dust, ambient temperatures, and industrial lighting. Work environment is similar to most manufacturing operations. May be exposed to excessive noise, temperatures, hazards associated with working around moving machinery, work in confined quarters, exposure to vibrations and shop lighting, continuous exposure to hot temperatures, may be humid, odors, dust, continuous exposure to mechanical hazards, and occasional exposure to chemical hazards.

The following Personal Protective Equipment is required:

• Safety glasses with side shields and hearing protection required when on manufacturing floor
• Approved safety footwear

The use of additional personal protective equipment (PPE) may be required when a job task(s) is being completed in or around your assigned department or in another department, this includes safety eyewear, hearing protection, and safety footwear