CNC Lathe Oper (2nd Shift)

ADP, Inc.

Houston (TX)

On-site

USD 52,000 - 64,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Evantic is seeking a CNC Lathe Operator (2nd Shift) in Houston, TX. You will independently set up, operate, and inspect CNC machines for standard production and ensure parts meet tight tolerances.

Strong GD&T, G-code editing, and precise measurement skills are essential to maintain quality and productivity. We value experienced machinists who can read complex prints, perform in-process inspections, and support continuous improvement within a busy production environment.

Qualifications

  • Minimum of three years of CNC machining experience.
  • Experience performing full CNC machine setups independently.
  • Experience reading complex prints and applying GD&T requirements.
  • Experience performing in-process inspection using standard measuring tools.
  • Experience with basic G-code edits at the machine.

Responsibilities

  • Independently set up and operate CNC machines for standard production work using setup sheets and fixtures.
  • Perform fixture changeovers, tool loading, touch-offs, and work offsets.
  • Adjust feeds, speeds, offsets, and cutting parameters to maintain part quality.
  • Perform basic program edits at the machine as needed.
  • Maintain production and inspection records and support quality objectives.

Skills

CNC machining
Reading prints
GD&T knowledge
Setup and run
Hand tools inspection

Education

High school diploma or GED
Technical school or apprenticeship preferred

Tools

G-code edits
Calipers/Micrometers

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CNC Lathe Oper (2nd Shift)

Full Time Direct Labor Houston, TX, US

The CNC Machinist II is responsible for independently setting up, operating, inspecting, and troubleshooting CNC machining work for standard production jobs. This role requires the ability to perform full setups, read complex prints, apply common GD&T requirements, make basic program edits, select appropriate tooling, and complete in-process inspection to ensure parts meet quality and production standards.

A CNC Machinist II is a fully independent machinist for standard production work. This role is expected to maintain productivity and quality, resolve common machining issues, support simultaneous operations where applicable, and assist less experienced machinists or operators as needed.

Key Responsibilities
Machine Setup, Operation, and Productivity
  • Independently set up and operate CNC machines for standard production work using setup sheets, work instructions, fixtures, tooling, and approved programs.
  • Perform fixture changeovers, tool loading, tool touch-offs, work offsets, and machine preparation required for assigned jobs.
  • Adjust feeds, speeds, offsets, and cutting parameters within established guidelines to maintain part quality and process stability.
  • Perform basic program edits at the machine as needed and within training level and authorization.
  • Support quality and efficiency by managing setup times, production flow, and simultaneous operations where applicable.
  • Monitor equipment, tooling, and part conditions throughout production and respond appropriately to prevent scrap, rework, or downtime.
Blueprint Reading, GD&T, and Inspection
  • Read and interpret complex prints, specifications, dimensions, tolerances, notes, and work instructions.
  • Understand and apply common GD&T controls and datum requirements during setup, machining, and inspection.
  • Perform full in-process inspection using calipers, micrometers, indicators, gauges, and other required measuring instruments.
  • Verify that parts meet dimensional, visual, and customer requirements before continuing production or releasing work to the next operation.
  • Identify nonconforming or questionable parts and follow procedures for escalation, containment, documentation, and corrective action support.
  • Maintain accurate production and inspection records in accordance with company procedures.
Troubleshooting, Tooling, and Materials
  • Resolve common machining issues related to tooling, offsets, surface finish, dimensional variation, fixturing, and machine conditions.
  • Select appropriate tooling independently for standard work and recommend tooling changes when needed.
  • Understand the machining behavior of common and difficult-to-machine materials and make appropriate adjustments within established guidelines.
  • Perform fixture changeovers and ensure machine is properly secured, aligned, and suitable for the operation.
  • Communicate recurring production, quality, tooling, or equipment concerns to supervisors, leads, engineering, or quality personnel as appropriate.
Team Support and Continuous Improvement
  • Assist CNC Operators and CNC Machinist I employees with job setup, inspection questions, troubleshooting, and process understanding as needed.
  • Suggest improvements to setup methods, tooling, inspection methods, safety, quality, and production efficiency.
  • Support cross-functional problem resolution with supervisors, leads, quality, engineering, production, and maintenance personnel.
  • Maintain a clean, safe, organized work area and model safe work practices for less experienced employees.
  • Support training and knowledge sharing to improve department capability and consistency.
Education
  • High school diploma or GED required.
  • Technical school, vocational machining training, apprenticeship coursework, or equivalent manufacturing training preferred.
Required Experience
  • Minimum of three years of CNC machining experience
  • Experience performing full CNC machine setups independently
  • Experience reading complex prints and applying common GD&T requirements.
  • Experience performing in-process inspection using standard measuring tools
  • Experience with basic G-code edits at the machine.
Skills and Competencies
  • Ability to independently set up and operate CNC machines for standard production work.
  • Ability to read complex prints, specifications, dimensions, and tolerances.
  • Working knowledge of common GD&T controls and inspection requirements.
  • Ability to perform full in-process inspection using calipers, micrometers, indicators, gauges, and related tools.
  • Ability to adjust feeds, speeds, offsets, and cutting parameters to maintain quality and productivity.
  • Ability to perform basic G-code edits at the machine within training level and authorization.
  • Strong tooling, machining, and material knowledge for standard and moderately complex machining work.
  • Ability to troubleshoot common machining issues and identify opportunities for improvement.
  • Ability to assist and support less experienced operators and machinists.
  • Strong attention to detail, accountability, teamwork, and commitment to safety and quality.
Physical Requirements
  • Ability to stand and walk for extended periods of time during the work shift.
  • Ability to use hands and fingers to handle parts, tools, gauges, fixtures, controls, and other equipment.
  • Ability to reach, bend, stoop, kneel, crouch, twist, and move around machines and work areas as needed.
  • Ability to lift, carry, push, or pull up to 30 pounds occasionally, and lesser amounts frequently.
  • Ability to perform repetitive motions, including loading and unloading parts, setting up tools and fixtures, and operating machine controls.
  • Ability to visually inspect parts, read complex prints, review inspection results, and identify defects or machining concerns.
  • Ability to hear machine alarms, verbal instructions, and other workplace safety signals with or without reasonable accommodation.
  • Ability to wear required personal protective equipment for the duration of assigned tasks.
Additional Responsibilities
  • Perform other duties as assigned to support production, quality, safety, and business needs.
  • Follow all company policies, procedures, work instructions, and safety requirements.
  • Maintain regular and reliable attendance.
  • Support a work environment that promotes accountability, teamwork, safety, quality, and continuous improvement.
Job Description Statement

This job description is intended to describe the general nature and level of work being performed by employees assigned to this position. It is not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions associated with the role. The Company reserves the right to modify, add, or remove duties and assign other responsibilities as needed.

Reasonable Accommodation Statement

The Company is committed to providing reasonable accommodations to qualified individuals with disabilities, unless doing so would create an undue hardship. Employees who require accommodation to perform the essential functions of the position should contact Human Resources.

Employment Statement

Employment with the Company is at-will, meaning either the employee or the Company may terminate the employment relationship at any time, with or without notice, and with or without cause, subject to applicable law.

Disclaimers

Employment is contingent on passing a reference check, background check, and drug screening.

Equal Employment Opportunity (EEO) Statement

Evantic is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, creed, national origin, ancestry, sex, pregnancy, gender identity or expression, sexual orientation, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. Evantic is committed to creating an inclusive and respectful workplace for all employees.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist II
CNC Machinist II

Evantic • Houston (TX)

On-site
USD 52,000 - 78,000
CNC Machinist II
CNC Machinist II

ADP, Inc. • Houston (TX)

On-site
USD 60,000 - 90,000
CNC Manufacturing Engineer - High‑Mix Machining
CNC Manufacturing Engineer - High‑Mix Machining

Automatic Data Processing, Inc. • Houston (TX)

On-site
USD 90,000 - 120,000
Manufacturing Engineer - Machine Shop
Manufacturing Engineer - Machine Shop

ADP, Inc. • Houston (TX)

On-site
USD 90,000 - 120,000
CNC Machinist II 2nd or 3rd shift
CNC Machinist II 2nd or 3rd shift

Tecomet, Inc • Wilmington (MA)

On-site
USD 55,000 - 75,000
CNC Machinist III - Lathe - 2nd Shift
CNC Machinist III - Lathe - 2nd Shift

Tecomet Inc. • Arlington (MA)

On-site
USD 60,000 - 85,000
CNC Machinist III - Lathe - 2nd Shift
CNC Machinist III - Lathe - 2nd Shift

Tecomet Inc. • West Newton (MA)

On-site
USD 70,000 - 90,000
CNC Machinist III - Lathe - 2nd Shift
CNC Machinist III - Lathe - 2nd Shift

Tecomet Inc. • Malden (MA)

On-site
USD 58,000 - 82,000
CNC Machinist III - Lathe - 2nd Shift
CNC Machinist III - Lathe - 2nd Shift

Tecomet Inc. • Newton Upper Falls (MA)

On-site
USD 70,000 - 95,000
CNC Machinist III - Lathe - 2nd Shift
CNC Machinist III - Lathe - 2nd Shift

Tecomet Inc. • Plaistow (NH)

On-site
USD 60,000 - 80,000