Brake Press Operator, 2nd Shift

Spx-Technologie; Mason (OH); On-site; USD 36,000 - 48,000; Full time

Benefits offered by this job

Generous paid time off

Health insurance plans

401(k) match

Education assistance

Job summary

SPX Technologies is seeking a Brake Press Operator for 2nd shift to manufacture precision metal components for industrial air movement equipment. Safely set up and operate press brakes, bend parts to spec, and support safety and productivity initiatives.

You will read blueprints, verify dimensions, and produce both short-run and high-volume parts while maintaining quality standards. Training on 1st shift is provided as needed.

Qualifications

• 1-3 years of experience operating manual hydraulic or mechanical press brakes.
• Experience performing manual machine setups and bend adjustments.
• Experience fabricating sheet metal components using manual press brake equipment.
• Ability to read blueprints and manufacturing drawings.
• Ability to accurately use measuring instruments including calipers, tape measures, and gauges.
• Mechanical aptitude with strong attention to detail.
• Ability to safely lift, move, and position materials.
• Strong commitment to safety and quality.

Responsibilities

• Safely set up and operate press brake equipment following company procedures and safety standards.
• Perform pre-operation equipment inspections and report maintenance concerns promptly.
• Maintain a clean, organized, and safe work area following 5S principles.
• Safely use required PPE and follow all plant safety policies.
• Support a culture where safety is everyone's responsibility.
• Set up and operate manual press brake equipment, including selecting and installing punches and dies.
• Calculate bend allowances, bend sequences, and tooling requirements to produce parts within specification.
• Perform manual back gauge adjustments and machine setup for various material types and thicknesses.
• Verify first-piece quality and make manual machine adjustments as needed throughout production runs.
• Produce both short-run and high-volume parts while maintaining quality and productivity standards.
• Read and interpret blueprints, work orders, routing sheets, and production schedules.
• Verify material type, thickness, and dimensions before production.
• Operate fabrication equipment efficiently to meet production goals and customer delivery commitments.
• Use grinders to remove burrs and prepare finished parts.
• Communicate production issues that could impact schedules or quality.
• Inspect finished parts using tape measures, calipers, squares, angle gauges, and other precision measuring tools.
• Verify dimensions, bend angles, and tolerances meet print specifications.
• Complete required production documentation accurately.
• Identify defects and take corrective action before parts move to the next operation.
• Maintain high quality standards while minimizing scrap and rework.
• Collaborate with supervisors, welders, material handlers, and other production team members.
• Crosstrain on other fabrication equipment as business needs require.
• Participate in continuous improvement and problem-solving initiatives.
• Demonstrate reliability, accountability, and a positive attitude.
• Aid other departments when needed to support customer commitments.

Skills

Press brake operation

Machine setup

Bend adjustments

Sheet metal fabrication

Blueprint reading

Measuring tools

Mechanical aptitude

Material handling

Safety awareness

Tooling knowledge

Bend deductions

Materials knowledge

Troubleshooting

Lean/5S

Metal fabrication

Reliability

Education

High school diploma or equivalent

Job description

Career Opportunities: Brake Press Operator, 2nd Shift (74819)

Requisition ID74819-Posted10/06/2026-Engineered Air Movement (EngAirMov)-AMER-United States-Ohio-Mason-Manufacturing - Operations

Building the people that build the world.

With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We’re a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world.

As part of Engineered Air Movement, Cincinnati Fan is a leading manufacturer of industrial fans and blowers for OEMs and industrial applications With its high attention to detail for products that are durable, energy efficient, and unparalleled in performance, companies rely on Cincinnati Fan to provide comfort and mission critical and industrial cooling solutions.

How you will make an Impact (Job Summary)

SPX is a diverse t eam of unique individuals who all make an impact.

As a Brake Press Operator, you will manufacture precision metal components used in industrial air movement equipment. Safely set up and operate manual hydraulic and mechanical press brakes to bend, form, and fabricate sheet metal components according to engineering drawings and production specifications. Working as part of a collaborative manufacturing team, you will produce quality parts that meet engineering specifications while supporting safety, productivity, and continuous improvement initiatives.

This is a cross-functional manufacturing position with opportunities to develop skills operating additional fabrication equipment including rolls, punches, saws, forming equipment, and other metal fabrication machinery.

This position is primarily on 2nd Shift and requires initial training on 1st Shift.

What you can expect in this role (Job Responsibilities)

While each day brings new opportunities at SPX, your core responsibilities will be:

Safety

• Safely set up and operate press brake equipment following company procedures and safety standards.
• Perform pre-operation equipment inspections and report maintenance concerns promptly.
• Maintain a clean, organized, and safe work area following 5S principles.
• Safely use required PPE and follow all plant safety policies.
• Support a culture where safety is everyone's responsibility.

Production & Delivery

• Set up and operate manual press brake equipment, including selecting and installing the appropriate punches and dies.
• Calculate bend allowances, bend sequences, and tooling requirements to produce parts within specification.
• Perform manual back gauge adjustments and machine setup for various material types and thicknesses.
• Verify first-piece quality and make manual machine adjustments as needed throughout production runs.
• Produce both short-run and high-volume parts while maintaining quality and productivity standards.
• Read and interpret blueprints, work orders, routing sheets, and production schedules.
• Verify material type, thickness, and dimensions before production.
• Operate fabrication equipment efficiently to meet production goals and customer delivery commitments.
• Use grinders and hand tools to remove burrs and prepare finished parts.
• Communicate production issues that could impact schedules or quality.

Quality

• Inspect finished parts using tape measures, calipers, squares, angle gauges, and other precision measuring tools.
• Verify dimensions, bend angles, and tolerances meet print specifications.
• Complete required production documentation accurately.
• Identify defects and take corrective action before parts move to the next operation.
• Maintain high quality standards while minimizing scrap and rework.
• Collaborate with supervisors, welders, material handlers, and other production team members.
• Crosstrain on other fabrication equipment as business needs require.
• Participate in continuous improvement and problem-solving initiatives.
• Demonstrate reliability, accountability, and a positive attitude.
• Aid other departments when needed to support customer commitments.

What we are looking for (Experience, Knowledge, Skills, Abilities, Education)

We each bring something to the table, and we are looking for someone who has:

Required Experience

• 1-3 years of experience operating manual hydraulic or mechanical press brakes in a manufacturing environment.
• Experience performing manual machine setups, tooling changes, and bend adjustments.
• Experience fabricating sheet metal components using manual press brake equipment.
• Ability to read blueprints and manufacturing drawings
• Ability to accurately use measuring instruments including calipers, tape measures, and gauges
• Mechanical aptitude with strong attention to detail
• Ability to safely lift, move, and position materials
• Strong commitment to safety and quality

Preferred Experience, Knowledge, Skills, and Abilities

• Knowledge of press brake tooling, punch and die selection, and setup procedures.
• Ability to calculate bend deductions, bend allowances, and flat patterns.
• Experience working with carbon steel, stainless steel, and aluminum.
• Ability to troubleshoot forming issues and make manual machine adjustments to achieve dimensional accuracy.
• Forklift or overhead crane experience
• Lean Manufacturing or 5S experience
• Welding or general metal fabrication experience
• Strong attendance and reliability

Education & Certifications

• High school diploma or equivalent

This position is performed in a manufacturing environment.

The employee will frequently:

• Stand for extended periods
• Bend, reach, stoop, twist, and climb as needed
• Lift and move materials weighing up to 50 pounds with assistance when appropriate
• Perform repetitive hand and arm motions
• Work around moving machinery and overhead cranes
• Be exposed to varying temperatures, loud noise, dust, and vibration
• Wear required personal protective equipment (PPE)

Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.

How we live our culture

Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX.

What benefits do we offer?

We know that the well-being of our employees is integral. Our benefits include:

• Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave
• Competitive health insurance plans and 401(k) match, with benefits starting day one
• Competitive and performance-based compensation packages and bonus plans
• Educational assistance, leadership development programs, and recognition programs

Our commitment to embrace diversity to build a culture of inclusion at SPX

We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential.

SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.