Boilermaker - Austin Industrial in Plaquemine, La.

Austin External; Plaquemine (LA); On-site; USD 61,000 - 82,000; Full time

Job summary

Austin Industrial in Plaquemine, LA is seeking a skilled Boilermaker to construct, repair, and maintain boilers and boiler house auxiliaries on industrial sites. You will read blueprints, align sections, weld and bolt pressure vessels, install fittings, and test assemblies, while following safety and quality procedures in a fast-paced environment.

Requires a minimum of 4 years in industrial planning or related craft, NCCER-Ind BM certification, TWIC card, and a valid driver’s license; must be

Qualifications

• Minimum 4 years in industrial planning and scheduling.
• NCCER-Ind BM Certified, TWIC Card, and a Valid Driver’s License required.
• Applicants must be legally authorized to work in the United States.

Responsibilities

• Examine boilers, pressure vessels, tanks, or vats to locate defects and repair.
• Bolt or arc welds pressure vessel structures using wrenches or welding equipment.
• Inspect assembled vessels or components to locate defects and ensure integrity.
• Repair or replace defective pressure vessel parts using torches, jacks, or welding equipment.
• Attach rigging and signal crane operators to lift heavy sections into place.
• Shape seams and joints to fit specifications using torches and metalworking tools.

Skills

Industrial planning and scheduling

Education

NCCER-Ind BM Certified

TWIC Card

Valid Driver's License

Job description

Boilermaker - Austin Industrial in Plaquemine, La.

Job Category: Hourly Craft

Requisition Number: BOILE034193

Rate: $34.50 USD per hour

Locations

Showing 1 location

Plaquemine, LA, USA

Description

About Austin Industrial

Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries.

Construct, assemble, maintain, and repair stationary steam boilers and boiler house auxiliaries. Align structures or plate sections to assemble boiler frame tanks or vats, following blueprints. Work involves use of hand and power tools, plumb bobs, levels, wedges, dogs, or turnbuckles. Assist in testing assembled vessels. Engages in the direct cleaning of boilers and boiler furnaces. Inspect and repair boiler fittings, such as safety valves, regulators, automatic control mechanisms, water columns, and auxiliary machines. This is accomplished by performing the following essential duties and responsibilities. Other duties may be assigned.

Specific Duties and Responsibilities:

• Examine boilers, pressure vessels, tanks, or vats to locate defects, such as leaks, weak spots, or defective sections, so that they can be repaired.
• Bolt or arc welds pressure vessel structures and parts together, using wrenches or welding equipment.
• Inspect assembled vessels or individual components, such as tubes, fittings, valves, controls, or auxiliary mechanisms, to locate any defects.
• Repair or replace defective pressure vessel parts, such as safety valves or regulators, using torches, jacks, caulking hammers, power saws, threading dies, welding equipment, or metalworking machinery.
• Attach rigging and signal crane or hoist operators to lift heavy frame and plate sections or other parts into place.
• Bell, bead with power hammers, or weld pressure vessel tube ends to ensure leakproof joints.
• Lay out plate, sheet steel, or other heavy metal and locate and mark bending and cutting lines, using protractors, compasses, and drawing instruments or templates.
• Install manholes, handholes, taps, tubes, valves, gauges, or feedwater connections in drums of water tube boilers, using hand tools.
• Study blueprints to determine locations, relationships, or dimensions of parts.
• Straighten or reshape bent pressure vessel plates or structure parts, using hammers, jacks, or torches.
• Shape seams, joints, or irregular edges of pressure vessel sections or structural parts to attain specified fit of parts, using cutting torches, hammers, files, or metalworking machines.
• Position, align, and secure structural parts or related assemblies to boiler frames, tanks, or vats of pressure vessels, following blueprints.
• Locate and mark reference points for columns or plates on boiler foundations, following blueprints and using straightedges, squares, transits, or measuring instruments.
• Shape or fabricate parts, such as stacks, uptakes, or chutes, to adapt pressure vessels, heat exchangers, or piping to premises, using heavy-metalworking machines such as brakes, rolls, or drill presses.
• Clean pressure vessel equipment, using scrapers, wire brushes, and cleaning solvents.
• Install refractory bricks or other heat‑resistant materials in fireboxes of pressure vessels.
• Assemble large vessels in an on‑site fabrication shop before installation to ensure proper fit.
• Other duties as assigned.
• Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Qualifications Required for this Position:

Experience: Minimum 4 years in industrial planning and scheduling

Certifications/Licenses: NCCER, a Valid TWIC Card and Driver’s License.

Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of this position.

Employees must be able to sit, stand, walk, climb, balance, stoop, kneel, crouch, crawl, reach, and use hands and fingers to perform assigned duties. Positions may require lifting, carrying, pushing, or pulling up to 50 pounds, working at elevations, on uneven surfaces, or in confined spaces. Employees must possess sufficient visual, hearing, communication, and motor skills to safely perform job responsibilities.

Employees must be able to read, comprehend, and follow safety procedures, work instructions, and company policies; exercise sound judgment; solve problems; maintain attention to detail; effectively manage stress; and adapt to changing priorities in a fast‑paced work environment.

Work may be performed in industrial and construction environments with exposure to weather conditions, temperature extremes, noise, dust, fumes, moving equipment, vibration, and other site‑specific hazards. Employees must be able to wear required personal protective equipment (PPE) and meet all customer, site, regulatory, medical, and fitness‑for‑duty requirements applicable to the position.

Must be able to perform all job duties while maintaining a constant commitment to safety, quality, and productivity expectations.

Austin Industrial is an Equal Opportunity Employer.

This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee‑owners by staffing agencies, search firms, or third‑party recruiters in response to a posted vacancy.The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement).

Any unsolicited resumes or candidate information submitted to this Company or any of its employee‑owners becomes the property of the Company.

Accessibility Note

If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact thePeople Services Teamat[phone].

Qualifications

Experience

Required

4 years:

4 years:

4+ years of Journeyman-level experience.

Licenses & Certifications

Required

NCCER-Ind BM Certified

TWIC Card

Valid Driver's License

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.