Avionics Manufacturing Engineer

Stratolaunch; California, Northern (MO, KY); Hybrid; USD 83,000 - 200,000; Full time

Benefits offered by this job

Paid Maternity and Parental Leave

401(k) with 50% match up to $11,500

Job summary

Stratolaunch in Mojave, CA is seeking an Avionics Manufacturing Engineer (ME I–Sr) to support design, integration, testing and maintenance of electrical and avionics systems on our carrier and hypersonic vehicles. You will create manufacturing work instructions and 2D/3D drawings to enable production on the shop floor and ensure producibility.

The role requires hands-on experience with aircraft electrical systems, CAD tools, and documentation control, plus the ability to communicate technical

Qualifications

• Bachelor’s degree in engineering or equivalent
• 0-20 years of engineering experience
• Experience with aerospace production documentation and revision control
• Experience with aircraft electrical power systems
• Experience creating shop work instructions
• Familiarity with aerospace hardware such as connectors, relays, and wire types
• Direct hands-on experience with aircraft electrical systems
• Ability to communicate technical challenges across audiences
• Ability to adapt to changing priorities

Responsibilities

• Create work instructions to fabricate, install or modify electrical and/or avionics subsystems
• Create drawings and work instructions for tooling supporting production
• Reference 3D CAD models and integrate into 2D environments
• Support shop as engineering liaison and troubleshoot documentation issues
• Troubleshoot electrical and avionics ground test issues
• Develop test plans and procedures as required
• Support hypersonic vehicle integrated testing
• Contribute to shop layout, setup and improvement
• Regular communication to leadership
• Travel as needed

Education

Bachelor’s degree in engineering

0-20 years of engineering experience

Tools

Oscilloscopes

Multimeters

AC/DC power supplies

Signal generators

3D CAD

Jira

Siemens Capital/Mentor Graphics

NX/CATIA/SolidWorks

LabVIEW

MS Office

Job description

Mojave, California, United States | Manufacturing

Stratolaunch is a technology accelerator that engineers operationally realistic testing at Mach 5+. Our air-launched, Talon testbeds are reusable, cost-effective platforms that enable routine access to the hypersonic environment. We deliver flight data critical to validating system performance and achieving rapid technology deployment. Together with our customers, we drive innovations that are imperative to advancing national security.

To help achieve these efforts, Stratolaunch is seeking an Avionics Manufacturing Engineer (ME) level I, II, or Sr to support design, integration, testing, and maintenance of one of our carrier or hypersonic vehicles electrical and avionics systems; as a ME you will be responsible for the following:

• Work Instructions, detailed documentation to be released to the electrical shop for manufacturing related information for production, testing or tooling.
  • Ability to fully define a manufacturing process step-by-step
  • Ability to identify alternate part numbers
  • Ability to produce engineering documentation following industry standards (Section Views, Detail Views, flag notes, etc.)
• Process improvement documentation to establish production line standardization efforts
  • Electrical manufacturing engineering processes to define current practices
  • Electrical manufacturing processes to define company practices and preferred manufacturing methods (Shop)
  • Aerospace Industry Standards implementation
  • Desktop and Shop Aid documentation to support current workflows
• Liaison engineering support in the electrical shop to provide technicians with sufficient support to complete the task on hand
  • Explain electrical manufacturing processes from Stratolaunch and Aerospace industry standards
  • Redline released engineering documentation
• Source and purchase electrical components from released engineering documentation and manufacturing related tasks for Shop support (Shop setup activities, tooling, etc.)
• Evaluation of a broad range of technical data, interaction with different disciplines involved in the design, purchasing, manufacturing, integration, and testing of our vehicle(s).
• Analyze and verify all the engineering requirements are met to estimate time of fabrication and producibility between the margins of cost and schedule

ESSENTIAL RESPONSIBILITIES

• Create work instructions to fabricate, install or modify electrical and/or avionics subsystems
• Create drawings and work instructions for tooling that supports the build phase of a production effort
• Reference 3D CAD models and integrate into 2D environments.
• Support the shop by acting as the engineering liaison to troubleshoot documentation issues and provide real-time support on the shop floor
• Troubleshoot electrical and avionics ground test issues
• Develop test plans and procedures, as required
• Support hypersonic vehicle integrated testing, as required
• Contribute to Shop layout, set up and improvement efforts, as required
• Regular and comprehensive communication to leadership
• Contribute to the integration of complex aerospace systems
• Travel, as needed, to support the department
• Demonstrate honesty, responsibility, integrity and fulfillment of commitments

QUALIFICATIONS & SKILLS

To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Required Qualifications:

• Knowledge of, and experience with, one or more of these disciplines:electrical engineering,avionics, experimental aircraft and/or launch vehicle integration
• Experience with Aerospace production documentation (drawings and work orders)
• Experience with PDM systems, Engineering control and revision control release processes
• Experience integrating launch vehicle or aircraft electrical power systems
• Experience with the creation of shop work instructions
• Familiarity with common aerospace hardware such as connectors, relays, and wire types
• Direct hands-on experience with aircraft electrical system installation and best practices
• Facilitation skills and ability to communicate technical challenges and guidance to varied audiences to gain support or resolve concerns
• Ability to work on your own initiative and prioritize tasking to fit within the business goals
• Complex aerospace system development
• Ability to quickly adapt to changing priorities

Preferred Qualifications:

• Security clearance

Required Skills:

• Lab equipment: Oscilloscopes, multimeters, AC/DC power supplies, signal generators
• Familiarity with 3D CAD
• MS Office (Word, Excel, Outlook)

Preferred Skills:

• Siemens Capital/Mentor Graphics
• 3D CAD modeling experience – NX, CATIA, or Solidworks
• Labview
• Familiarity with configuration management systems – Jira (preferred)

EDUCATION & EXPERIENCE

• Level I ($83,000-$120,500): Bachelor’s degree (B.S.) from accredited institution and 0-2 years of engineering experience, OR equivalent combination of education and experience
• Level II ($98,100-$128,700): Bachelor’s degree (B.S.) from accredited institution and 2-5 years of engineering experience, OR equivalent combination of education and experience
• Sr Level ($117,000-$153,500): Bachelor’s degree (B.S.) from accredited institution and 5-10 years of engineering experience, OR equivalent combination of education and experience
• Staff Level ($152,500-$200,000): Bachelor’s degree (B.S.) from accredited institution and 10-20 years of engineering experience, OR equivalent combination of education and experience

Special remarks regarding work environment, if applicable

• Position on-site based in Mojave, CA
• Travel, as needed, to support the department, travel estimated to be <5%

Base salary and leveling are established on a case-by-case basis. We consider several factors to ensure a competitive offer, including your location, educational background, and a comprehensive assessment of the skills and experience demonstrated during your interviews.
Benefits and our location(s):

• Paid Maternity and Parental Leave
• 50% company match per contributed dollar into 401(k) savings plan, up to $11,500

This position may involve the operation of company vehicles as part of assigned duties.

Mojave Air & Spaceport is located just outside of Lancaster/Palmdale and is only 95 miles north of Los Angeles. The area offers both affordability and central access to a variety of California's best attractions and landmarks.

Not much for the outdoors and prefer the city life? You’re within a half day’s drive or less of Los Angeles, San Diego, Las Vegas, and San Francisco where you can find a variety of live entertainment, museums, tours, and historical sight‑seeing. Theme parks are in abundance, with Six Flags Magic Mountain, Disneyland, and Knotts Berry Farm ready to meet the needs of rollercoaster thrill seekers.

Food and drink fanatics are in a haven of delectable choices. Wine aficionados will also find easy access to some of the state’s best vino in Paso Robles, Santa Ynez, and even more locally in Tehachapi and Agua Dulce. Beer fanatics will find some of the best West Coast IPAs at Bravery and Lucky Luke’s in Lancaster. Any food option you crave is covered, and we always recommend the authentic and fresh Mexican food that you won’t find anywhere else in the United States.

Stratolaunch is an equal opportunity employer that values diversity at our company. We encourage people from all walks of life to apply, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other characteristic protected by law. Our management team does not tolerate discrimination or harassment at any point during our employees’ and applicants’ time with us, especially with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment. For purposes of transparency, U.S. Citizenship may be required for some positions with a government clearance and certain other restricted positions.

Equal Employment Opportunity is the Law: