Aviation Mechanic III (F5)

Yulista Holding LLC; Huntsville (AL); On-site; USD 60,000 - 90,000; Full time

Job summary

Yulista Integrated Solutions LLC is seeking an Aircraft Mechanic in Huntsville, AL. The role entails performing maintenance on various aircraft systems, troubleshooting to meet customer needs, and documenting work per QA and regulatory requirements.

The candidate will collaborate with engineers on modifications, access government technical references, and lead maintenance activities including engine/gearbox removal and rigging. A strong safety record and ability to obtain clearance are essential.

Qualifications

• High School Diploma or Equivalent; 10 years aviation experience with military standards.
• FAA A&P preferred; ability to obtain/maintain government clearance.
• Strong communication and safety compliance required.

Responsibilities

• Perform Aircraft maintenance per instructions and drawings.
• Troubleshoot systems to meet customer needs and document maintenance per QA rules.
• Maintain cleanliness and proper tool control; report missing or damaged tools.
• Collaborate with engineers on modifications and drawings during V&V events.
• Use government systems to access technical references for airframe repairs.
• Perform preflight, in-flight, and post-flight maintenance inspections.
• Provide technical direction and training to helpers.

Skills

Aviation maintenance

Troubleshooting

Documentation

Safety compliance

Team leadership

Education

High School Diploma or Equivalent

10 years aviation experience

Job description

Yulista Integrated Solutions LLC

Regular

Essential Functions

• Perform Aircraft Maintenance IAW instructions/drawings
• Troubleshoot systems as required to meet customer needs
• Document maintenance as per Quality Assurance (QA) and established regulatory requirements.
• Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties.
• Perform regular Foreign Object Damage (FOD) walks.
• Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications.
• Maintain control tools. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools.
• Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor.
• Collaborate with engineers on changes to Modification Work Orders and drawings during Prototype, Validation, and Verification events as required
• Use Government computer system to access various technical references for airframe repairs and Government training requirements.
• Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, ventilation, and heating systems.
• Repair, replace, and rebuild aircraft structures and functional components including rigging, surface controls, plumbing, and hydraulic units, using hand tools, power tools, machines, equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills.
• Troubleshoot engines and systems and use Federal Supply systems.
• Replace or repair worn or damaged components, such as alternators, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment.
• Leads team in removal/installation of engines and gearboxes from aircraft, using hoist or crane.
• Leads team in rigging, track and balance procedures.
• Disassemble and inspect airframe and other components for wear, cracks, security, or other defects. Repair or replace defective parts then reassemble and install in aircraft.
• Perform preflight, thru-flight, and post-flight maintenance inspections.
• Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.
• Perform jacking and towing of aircraft.
• Enter in the maintenance records description of the work performed and verifies the work was performed satisfactorily.
• Service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.
• Research the technical library and other applicable technical documentation (such as manufacturer and DHS/DOD maintenance manuals, service bulletins, engineering and technical data) to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
• Perform progressive, isochronal, phase, periodic, and other hourly or calendar inspections. Inspects jet engines and components for cracks, corrosion, FOD, burned areas, distortions, security, warping, wear, and missing segments.
• Inspect jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks. Test engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and calibration tester, to locate source of malfunction.
• Perform full system checkouts and complete servicing on all aircraft systems.
• Provide technical direction/training to Aircraft Mechanic Helpers and Aircraft Workers.

Supervisory Responsibilities

This position does not have direct reports.

KNOWLEDGE, SKILLS, & ABILITIES

• May require knowledge of and experience performing maintenance on the following aircraft:

UH-60 A/L, UH-60 M, 407, 206, OH-58, AH 64 D, AH-64E, CH-47 F, MC-130J, HC-130, C-130, C-26, EC-145, EC-135, LUH-72, UC-35, 407, V22, AH-IF, COBRA, APACHE

• Must be capable of carrying items up to 40 pounds. Heavier items must seek assistance of other workers or weightlifting devices
• Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures.
• Must be capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time.
• Ability to read and interpret aircraft instruments.
• Use special test equipment and tools.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to write routine reports and correspondence
• Interpersonal skills necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with external contacts such as customers, vendors, suppliers, shipping companies, etc. Must always represent Yulista in a professional manner.
• Must be trustworthy – will handle confidential information routinely
• Ability to use general office equipment such as phone, copier, scanner, printers, etc.
• Ability to follow a process.
• Strong professional customer service skills, with active listening, prompt service and follow-up.
• Analytical skills to evaluate data and consider decision impact across multiple areas.
• Strong decision analysis and problem-solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management.
• Ability to learn and understand corporate policies, procedures and relating to Yulista goals.
• Ability to perform basic mathematical computations
• High degree of self-motivation and the ability to work independently
• Ability to multi-task

QUALIFICATIONS

• High School Diploma or Equivalent with 10 years’ aviation experience with 4 years using military standards and specifications
• Knowledge of commonly used concepts, practices, and procedures within the field required.
• Strong communication skills
• Ability to pass a drug and background screening
• Must be able to obtain and maintain a government security clearance
• FAA A&P preferred
• F5 / T38 experience required
• Related aircraft rigging qualification

PREFERENCE STATEMENT

Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g).

EEO STATEMENT

Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits.

REASONABLE ACCOMMODATION

It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities.

The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements.

This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.