Automotive Paint & Blast Technician

Cherokee Federal; Jacksonville (NC); Vor Ort; USD 36.000 - 47.000; Vollzeit

Benefits dieser Stelle

Medical insurance

Dental insurance

Vision insurance

401K

Zusammenfassung

Cherokee Federal is actively seeking an Automotive Blasting & Paint Technician to prepare surfaces, apply refinishes, and reassemble government vehicles per DoD standards. This role demands meticulous color matching and safe handling of coatings within a controlled paint booth.

The ideal candidate has 5+ years of journeyman painting experience, I-CAR or ASE certification preferred, and a strong grasp of HVLP spray systems, safety, and PPE requirements.

Qualifikationen

• Active T1 Security Clearance required; CAC eligibility.
• Minimum five (5) years journeyman-level automotive painting and refinishing experience.
• I-CAR or ASE certification in Painting and Refinishing strongly preferred.
• Color theory, tinting, blending, and factory color matching expertise.
• Proficiency in HVLP spray systems, paint booth operation, air systems, sanding equipment, and refinishing tools.
• Hazardous material handling, PPE requirements, and OSHA/DoD safety compliance.

Aufgaben

• Perform surface prep, refinishing, and reassembly of government vehicles to manufacturer specs and DoD requirements.
• Identify corrosion, body repairs, paint failures, and required refinishing procedures.
• Color match using computerized systems and spectrophotometers; ensure factory-level accuracy.
• Mask non-painted areas to prevent overspray and maintain crisp lines.
• Operate and maintain a ventilated paint booth and HVLP spray equipment.
• Conduct defect corrective work and conduct final inspection and detailing.

Kenntnisse

Security clearance

Journeyman painting

I-CAR certified

ASE certified

Color matching

HVLP spray

DoD safety compliance

Hazardous materials handling

Tools

Spectrophotometer

HVLP spray equipment

Jobbeschreibung

Automotive Blasting & Paint Technician

The Automotive Paint & Refinishing Technician is responsible for complete surface preparation, refinishing, defect correction, and reassembly of government vehicles and components in accordance with manufacturer specifications, industry best practices, and Department of Defense requirements. All work shall be performed in a controlled paint booth environment and in strict compliance with safety, environmental, and security protocols.

Compensation & Benefits:

Estimated Starting Salary Range for Automotive Blasting & Paint Technician: $30.00/HR

Pay commensurate with experience.

Full time benefits include Medical, Dental, Vision, 401K, and other possible benefits as provided.Benefits are subject to change with or without notice.

Automotive Blasting & Paint Technician Responsibilities Include:

• Conduct detailed initial inspections to determine scope of work, substrate material (steel, aluminum, plastic, fiberglass), and condition of existing coatings.
• Identify corrosion, previous body repairs, paint failures, and required refinishing procedures.
• Remove, label, inventory, and safely store trim, hardware, lighting, and associated components to ensure unobstructed access.
• Perform precise color matching using computerized systems, spectrophotometers, and spray-out test panels to achieve factory-level accuracy and seamless blending.
• Clean and degrease all surfaces using automotive-grade wax and grease removers to eliminate contaminants (silicone, oil, tar, road debris).
• Strip, sand, and feather existing finishes using DA sanders, block sanding techniques, and appropriate abrasives.
• Perform minor body repairs including application and shaping of fillers and glazing putties; sand to OEM-level contour standards.
• Expertly mask and protect all non-painted areas using professional automotive masking materials to ensure crisp lines and zero overspray.
• Operate and maintain a properly ventilated, filtered automotive paint booth.
• Select and apply appropriate primers (etching, epoxy, high-build) based on substrate and repair requirements.
• Apply guide coat and conduct final block sanding to ensure flatness, adhesion, and readiness for topcoat application.
• Apply multiple uniform coats of basecoat using HVLP or equivalent professional spray equipment.
• Achieve consistent coverage free of runs, sags, dry spray, or striping.
• Apply multi-layer clearcoat systems to ensure durability, gloss, UV protection, and chemical resistance.
• Ensure final finish meets OEM and DoD quality standards.
• Monitor and manage proper curing processes (air dry or bake cycle) in accordance with manufacturer specifications.
• Perform defect correction (“cut and buff”) including wet sanding, compounding, and polishing to eliminate dust nibs, orange peel, or minor imperfections.
• Reassemble all components to original specifications.
• Conduct final inspection and detailing to deliver a service-ready vehicle.
• Properly handle and dispose of hazardous materials (solvents, paint waste, filters) in accordance with federal, state, local, and DoD environmental regulations.
• Maintain strict adherence to paint booth safety standards and hazardous material protocols.
• Utilize and maintain required PPE, including fit-tested fresh-air respirators.
• Maintain a secure work environment in compliance with DoD facility requirements.
• Performs other job-related duties as assigned

Automotive Blasting & Paint Technician Experience, Education, Skills, Abilities requested:

• Active T1 (Tier 1) Security Clearance required. Must be eligible for and maintain a valid Common Access Card (CAC).
• Minimum five (5) years of documented journeyman-level automotive painting and refinishing experience.
• I-CAR or ASE certification in Painting and Refinishing strongly preferred.
• Color Expertise: Demonstrated expert-level knowledge of color theory, tinting, blending, and factory color matching techniques.
• Advanced proficiency in HVLP spray systems, paint booth operation, air systems, sanding equipment, and refinishing tools.
• Proven knowledge of hazardous material handling, PPE requirements, and OSHA/DoD safety compliance.
• Ability to stand for extended periods, lift components, and perform repetitive precision work in a controlled shop environment.
• Must pass pre-employment qualifications of Cherokee Federal

Preferred Qualifications

• Experience working in a government, military, or secure facility environment.
• Experience refinishing specialty substrates or military fleet vehicles.
• Familiarity with OEM and military coating specifications.

Company Information:

Cherokee Nation Government Solutions (CNGS) is a part of Cherokee Federal – the division of tribally owned federal contracting companies owned by Cherokee Nation Businesses. As a trusted partner for more than 60 federal clients, Cherokee Federal LLCs are focused on building a brighter future, solving complex challenges, and serving the government’s mission with compassion and heart. To learn more about CNGS, visit cherokee-federal.com.

#CherokeeFederal #LI

Cherokee Federal is a military friendly employer. Veterans and active military transitioning to civilian status are encouraged to apply.

Similar searchable job titles:

• Automotive Surface Preparation & Refinishing Technician
• Abrasive Blasting & Coatings Technician
• Automotive Paint & Surface Specialist
• Vehicle Media Blasting & Finishing Technician
• Automotive Coatings & Restoration Technician

Keywords:

• Surface Preparation
• Abrasive / Media Blasting
• Automotive Refinishing
• HVLP Spray Application
• Color Matching & Blending

Legal Disclaimer:

All qualified applicants will receive consideration for employment without regard to protected veteran status, disability or any other status protected under applicable federal, state or local law.

Many of our job openings require access to government buildings or military installations.

Please Note: This position is pending a contract award.