Automation/PLC/Calibration Technician - 1st shift

Electron Energy Corp

Landisville (PA)

On-site

USD 30,000 - 47,000

Full time

Just now
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Electron Energy Corp in Landisville, PA is seeking a Maintenance Technician to support production and facility operations. The role covers preventive maintenance, calibration, controls support, equipment repair, and system modifications involving analog and digital electronics, furnace controls, and PLC-controlled machinery in a climate-controlled plant.

You will participate in continuous improvement initiatives, maintain calibration documentation, and ensure safe, reliable operation.

Qualifications

  • High school diploma required; technical/vocational training in electronics/electrical automation preferred.
  • Experience with diagnostic and precision tools (oscilloscopes, multimeters, calipers).
  • Ability to troubleshoot industrial electrical/electronic systems and PLC-controlled equipment.

Responsibilities

  • Perform preventive and predictive maintenance on electronic, electrical, and manufacturing systems.
  • Troubleshoot equipment failures and diagnose electrical, electronic, mechanical, hydraulic, and control system issues.
  • Maintain calibration records and CMMS entries; support uptime and continuous improvement in manufacturing.
  • Repair and service furnaces, presses, motors, sensors, HMIs, and related hardware; coordinate with teams and vendors.

Skills

Preventive maintenance
Calibration
Controls integration
Electrical troubleshooting
PLC troubleshooting
Diagnostics
CMMS

Education

High school diploma
Technical/vocational or trade schooling in electronics/electrical automation

Tools

Oscilloscopes
Multimeters
Calipers

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Maintenance Full Time Technical Landisville, PA, US

Job Summary

This role supports production and facility operations through preventive maintenance, calibration, controls support, equipment repair, and system modifications involving analog and digital electronics, furnace controls, test equipment, PLC-controlled machinery, and related industrial systems. The technician will also support continuous improvement initiatives and maintain calibration documentation in our climate-controlled facility.

  • Preventive Maintenance & Equipment Reliability
    • Perform preventive and predictive maintenance on electronic, electrical, and integrated manufacturing systems and equipment.
    • Troubleshoot equipment failures and diagnose electrical, electronic, mechanical, pneumatic, hydraulic and control system issues to minimize downtime and improve reliability.
    • Inspect, troubleshoot, test, maintain, calibrate, fine-tune, and repair production equipment and associated control systems.
    • Maintain preventive maintenance schedules, work orders, and equipment records within the computerized maintenance management system (CMMS), and Guage tracker software.
    • Support uptime initiatives and continuous improvement efforts across manufacturing operations.
  • Calibration & Process Profiling
    • Perform and document calibrations in accordance with approved procedures and schedules while maintaining required records, logs, and reporting.
    • Review and recommend updates to calibration procedures in coordination with Maintenance and Quality teams, ensuring calibrations are completed within established timelines.
    • Perform temperature and performance profiling on furnaces, sinter tubes, magnetizing coils, and related process equipment.
  • Equipment Repair & Technical Support
    • Repair and maintain electronic manufacturing equipment including furnaces, presses, magnetizers, ovens, Hall probes [LP1] , gauss/flux meters, adjusting machines, PLC-controlled systems, robotics, HMIs, air quality meters, and related hardware.
    • Ability to Troubleshoot and repair electrical and electronic systems to the component level using diagnostic equipment such as oscilloscopes and multimeters skills desired.
    • Coordinate with operators, maintenance personnel, engineers, and outside vendors to resolve technical issues and provide equipment troubleshooting support for production.
    • Identify spare parts and consumable needs and support inventory management activities.
  • New Equipment & System Modifications
    • Support installation, startup, modification, relocation, and validation of manufacturing equipment and control systems.
    • Assist with electrical controls design, panel wiring, equipment layout, and program modifications for manufacturing systems.
    • Write and edit PLC/HMI program code as required to support equipment functionality and process improvements.
    • Ability to support fabrication activities, mechanical layouts, and creation of technical drawings and 3D models using SolidWorks desired.
    • Train operators and maintenance personnel on equipment operation, functionality, and safe work practices.
  • Safety, Documentation & Team Support
    • Follow all company safety procedures and OSHA requirements related to equipment operation, troubleshooting, installation, and repair.
    • Communicate potential equipment, electrical, or operational hazards to appropriate personnel.
    • Maintain accurate maintenance, calibration, and performance documentation.
    • Support housekeeping standards and maintain an organized work environment.
    • Provide technical leadership, guidance, and training to maintenance and production personnel.
    • Support engineering and cross-functional improvement projects as needed.
    • Perform other duties as assigned.
  • Perform additional duties as required to support operational and strategic objectives.
  • Strong commitment to safety and safe work practices in an industrial manufacturing environment.
  • Proven experience troubleshooting and repairing electrical, electronic, mechanical, hydraulic, and pneumatic systems.
  • Strong knowledge of industrial electrical and electronic components, controls, and diagnostic equipment.
  • Ability to read and interpret electrical schematics, blueprints, technical manuals, and wiring diagrams.
  • Ability to work independently in a fast-paced manufacturing environment while managing multiple priorities.
  • Willingness to work overtime and respond to equipment issues as required.
  • High level of precision and attention to detail when working with tight tolerances and sensitive equipment.
  • Ability to work in overhead structures, beneath equipment, and in confined or restricted spaces during troubleshooting and repair activities
  • Strong documentation, communication, and organizational skills.
Qualifications

Education and Experience:

  • Education:
    • High school diploma required
    • Technical, vocational, or trade school education in electronics, electrical technology, automation, or related field preferred.
  • Experience:
    • Experience using diagnostic and precision measuring tools including oscilloscopes, multimeters, micrometers, and calipers.
    • Strong troubleshooting and root cause analysis skills.
    • Experience supporting industrial manufacturing equipment and PLC automated systems.
  • Other requirements:
    • This position may require access to ITAR-controlled technical data and services. As such, all applicants must be U.S. persons, as defined by ITAR, to be considered for this role. A U.S. person is a U.S. citizen, lawful permanent resident, or individual with protected status under U.S. immigration laws. Applicants who do not meet these criteria will not be considered for the position
Job Summary

This role supports production and facility operations through preventive maintenance, calibration, controls support, equipment repair, and system modifications involving analog and digital electronics, furnace controls, test equipment, PLC-controlled machinery, and related industrial systems. The technician will also support continuous improvement initiatives and maintain calibration documentation in our climate-controlled facility.

Essential Duties & Responsibilities
  • Preventive Maintenance & Equipment Reliability
    • Perform preventive and predictive maintenance on electronic, electrical, and integrated manufacturing systems and equipment.
    • Troubleshoot equipment failures and diagnose electrical, electronic, mechanical, pneumatic, hydraulic and control system issues to minimize downtime and improve reliability.
    • Inspect, troubleshoot, test, maintain, calibrate, fine-tune, and repair production equipment and associated control systems.
    • Maintain preventive maintenance schedules, work orders, and equipment records within the computerized maintenance management system (CMMS), and Guage tracker software.
    • Support uptime initiatives and continuous improvement efforts across manufacturing operations.
  • Calibration & Process Profiling
    • Perform and document calibrations in accordance with approved procedures and schedules while maintaining required records, logs, and reporting.
    • Review and recommend updates to calibration procedures in coordination with Maintenance and Quality teams, ensuring calibrations are completed within established timelines.
    • Perform temperature and performance profiling on furnaces, sinter tubes, magnetizing coils, and related process equipment.
  • Equipment Repair & Technical Support
    • Repair and maintain electronic manufacturing equipment including furnaces, presses, magnetizers, ovens, Hall probes [LP1] , gauss/flux meters, adjusting machines, PLC-controlled systems, robotics, HMIs, air quality meters, and related hardware.
    • Ability to Troubleshoot and repair electrical and electronic systems to the component level using diagnostic equipment such as oscilloscopes and multimeters skills desired.
    • Coordinate with operators, maintenance personnel, engineers, and outside vendors to resolve technical issues and provide equipment troubleshooting support for production.
    • Identify spare parts and consumable needs and support inventory management activities.
  • New Equipment & System Modifications
    • Support installation, startup, modification, relocation, and validation of manufacturing equipment and control systems.
    • Assist with electrical controls design, panel wiring, equipment layout, and program modifications for manufacturing systems.
    • Write and edit PLC/HMI program code as required to support equipment functionality and process improvements.
    • Ability to support fabrication activities, mechanical layouts, and creation of technical drawings and 3D models using SolidWorks desired.
    • Train operators and maintenance personnel on equipment operation, functionality, and safe work practices.
  • Safety, Documentation & Team Support
    • Follow all company safety procedures and OSHA requirements related to equipment operation, troubleshooting, installation, and repair.
    • Communicate potential equipment, electrical, or operational hazards to appropriate personnel.
    • Maintain accurate maintenance, calibration, and performance documentation.
    • Support housekeeping standards and maintain an organized work environment.
    • Provide technical leadership, guidance, and training to maintenance and production personnel.
    • Support engineering and cross-functional improvement projects as needed.
    • Perform other duties as assigned.
  • Perform additional duties as required to support operational and strategic objectives.
Key Skills & Competencies
  • Strong commitment to safety and safe work practices in an industrial manufacturing environment.
  • PLC experience in multiple platforms desired.
  • Proven experience troubleshooting and repairing electrical, electronic, mechanical, hydraulic, and pneumatic systems.
  • Strong knowledge of industrial electrical and electronic components, controls, and diagnostic equipment.
  • Ability to read and interpret electrical schematics, blueprints, technical manuals, and wiring diagrams.
  • Ability to work independently in a fast-paced manufacturing environment while managing multiple priorities.
  • Willingness to work overtime and respond to equipment issues as required.
  • High level of precision and attention to detail when working with tight tolerances and sensitive equipment.
  • Ability to work in overhead structures, beneath equipment, and in confined or restricted spaces during troubleshooting and repair activities
  • Strong documentation, communication, and organizational skills.
Qualifications

Education and Experience:

  • Education:
    • High school diploma required
    • Technical, vocational, or trade school education in electronics, electrical technology, automation, or related field preferred.
  • Experience:
    • Experience using diagnostic and precision measuring tools including oscilloscopes, multimeters, micrometers, and calipers.
    • Strong troubleshooting and root cause analysis skills.
    • Experience supporting industrial manufacturing equipment and PLC automated systems.
  • Other requirements:
    • This position may require access to ITAR-controlled technical data and services. As such, all applicants must be U.S. persons, as defined by ITAR, to be considered for this role. A U.S. person is a U.S. citizen, lawful permanent resident, or individual with protected status under U.S. immigration laws. Applicants who do not meet these criteria will not be considered for the position
First shift - Monday through Friday 6:30 am - 3:00 pm
First shift - 40 hours
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Automation/PLC/Calibration Technician - 1st shift
Automation/PLC/Calibration Technician - 1st shift

Electron Energy Corporation • Landisville (PA)

On-site
USD 60,000 - 85,000
Automation/PLC/Calibration Technician - 1st shift
Automation/PLC/Calibration Technician - 1st shift

Electron Energy Corporation • Pennsylvania

On-site
USD 50,000 - 70,000
Industrial Maintenance Technician - Weekend shift
Industrial Maintenance Technician - Weekend shift

Electron Energy Corporation • Lancaster

On-site
USD 39,000 - 55,000
Shift differential
Bonus opportunity
Industrial Maintenance Technician - Weekend shift
Industrial Maintenance Technician - Weekend shift

Electron Energy Corp • Chestnut Ridge (PA)

On-site
USD 39,000 - 55,000
Industrial Maintenance Technician - 1st shift
Industrial Maintenance Technician - 1st shift

Electron Energy Corporation • Pennsylvania

On-site
USD 39,000 - 55,000
Industrial Maintenance Technician - 1st shift
Industrial Maintenance Technician - 1st shift

Electron Energy Corporation • Landisville (PA)

On-site
USD 47,000 - 52,000
Industrial Maintenance IV - 1st Shift (8am -4pm)
Industrial Maintenance IV - 1st Shift (8am -4pm)

TekniPlex • Clinton (IL)

On-site
USD 60,000 - 90,000
Industrial Maintenance Technician
Industrial Maintenance Technician

American Trim, LLC • Sidney (OH)

On-site
USD 37,000 - 55,000
Day-one holiday pay
Day-one 401(k) with company match
Vacation eligibility on day one
+6
Industrial Maintenance Technician – Rotating Shifts + Benefits
Industrial Maintenance Technician – Rotating Shifts + Benefits

ingredients PLUS LLC. • Pennsylvania

Hybrid
USD 60,000 - 67,000
Quarterly performance bonus
Health insurance
Dental insurance
+8
Maintenance Automation Technician - 1st Shift
Maintenance Automation Technician - 1st Shift

R. H. Sheppard Co. • Hanover

On-site
USD 65,000 - 90,000