Assoc Machine Operator

Edwards Lifesciences

Salt Lake City (UT)

Presencial

USD 21.000 - 30.000

Jornada completa

Hace 3 días
Sé de los primeros/as/es en solicitar esta vacante

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

Edwards Lifesciences in Salt Lake City is seeking a Metal Machinist/Operator to set up and run metal fabrication equipment in support of device manufacturing. You will follow SOPs, document data in MES, and ensure process parameters stay in control.

The role requires a high school diploma and the ability to read English, with attention to safety, quality, and basic computer skills. Travel is occasional per management.

Formación

  • Requires ability to operate and set up metal fabrication equipment.
  • Ability to read and follow SOPs and work instructions.
  • Capacity to use inspection tools and document results.

Responsabilidades

  • Set up equipment, load materials and run manufacturing processes for metal device components.
  • Record traceable information in device history records or MES including downtime reasons.
  • Verify equipment readiness and adjust parameters to meet quality specs.
  • Inspect equipment and metal parts during production to ensure process control.
  • Capture process parameters for device history records.
  • Perform basic equipment care and maintenance and escalate issues as needed.
  • Use appropriate tools, fixtures and equipment for assigned operations.
  • Troubleshoot equipment/process issues and escalate when necessary.
  • Handle and use chemicals per safety procedures and follow PPE rules.
  • Operate laser equipment when assigned and follow laser safety rules.

Conocimientos

Machinery operation
Quality control
Safety procedures
English literacy
Basic computer skills
Troubleshooting

Educación

High School Diploma

Herramientas

MES data entry

Descripción del empleo

Performs Machine Operator (Metals) work to support manufacturing/production activities, following established procedures and guidance. Set-up and run a variety of types of machinery in the manufacturing process, in keeping with SOPs and established production schedule; and provide training and guidance to co-workers.

Key Responsibilities:
  • Set up equipment, load materials, and run manufacturing processes to make device components and/or sterilize finished Metals products.
  • Follow work instructions and SOPs. Record required, traceable information on device history records and/or enter data into the Manufacturing Execution System (MES), including equipment uptime and reasons for downtime.
  • Check that equipment is ready before starting, and make in-process adjustments within approved settings and process parameters to meet quality requirements.
  • Inspect equipment and Metals product during production to make sure the process stays in control and parts meet specifications.
  • Make sure process parameters are captured (manually or automatically, as required) so they can be included in the device history record.
  • Perform basic operator equipment care and maintenance per standards. Take action or elevate when equipment does not meet the standard.
  • Select and use the correct tools, fixtures, and equipment for the assigned operation.
  • Troubleshoot equipment and process issues. Escalate problems to the Lead/Supervisor/Engineering as needed.
  • Handle, mix, and use chemicals as required for the process (if applicable). Use required PPE and follow all chemical safety and handling procedures.
  • Operate laser equipment (if assigned) and follow all laser safety rules.
Education and Experience:

H.S. Diploma or equivalent some previous experience in using similar machinery Preferred

Additional Skills:
  • Good communication skills
  • Due to the specific duties of this job, you must be able to read, comprehend, write, and speak English
  • Basic computer skills, preferred
  • Ability to use automated inspection and/or vision systems, inspection and measuring tools (for example: magnifier, microscope, or other measurement tools)
  • Basic understanding of manufacturing procedures or another regulated environment (ISO 13485 and/or GMP)
  • Achieve quality standards
  • Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control
  • Travel (day and overnight by car, air, train, etc.) will vary. Percentage of time is determined by Management

Edwards is an Equal Opportunity/Affirmative Action employer including protected Veterans and individuals with disabilities.

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Assoc Machine Operator
Assoc Machine Operator

Edwards Lifesciences • Draper (UT)

Presencial
USD 22.000 - 33.000
Assoc Machine Operator
Assoc Machine Operator

Edwards • Salt Lake City (UT)

Presencial
USD 21.000 - 34.000
Assoc Machine Operator
Assoc Machine Operator

Edwards Lifesciences LLC • Draper (UT)

Presencial
USD 38.000 - 52.000
First Shift Entry Level Machine Operator $19.50/hr
First Shift Entry Level Machine Operator $19.50/hr

Edwards Lifesciences • Salt Lake City (UT)

Presencial
USD 22.000 - 32.000
Health, Dental and Vision on day 1
3 weeks vacation
2 weeks paid sick leave
+7
Second Shift Entry Level Machine Operator $21.45/hr
Second Shift Entry Level Machine Operator $21.45/hr

Edwards Lifesciences • Draper (UT)

Presencial
USD 50.000 - 61.000
Health, Dental and Vision plans on day
3 weeks Vacation
2 weeks Paid Sick Leave
+7
Metals Machine Operator – Training & Process Control
Metals Machine Operator – Training & Process Control

Edwards Lifesciences • Draper (UT)

Presencial
USD 22.000 - 33.000
Machine Operator
Machine Operator

Katalyst CRO • Sparks Corner (MD)

Presencial
USD 25.000 - 36.000
Machine Operator I (26651)
Machine Operator I (26651)

NEOTech • Carlsbad (CA)

Presencial
USD 45.000 - 65.000
Second Shift Entry Level Machine Operator $21.45/hr
Second Shift Entry Level Machine Operator $21.45/hr

Edwards Lifesciences Gruppe • Salt Lake City (UT)

Presencial
USD 26.000 - 30.000
Health insurance
Dental insurance
Vision insurance
+9
First Shift Entry Level Machine Operator $19.50/hr
First Shift Entry Level Machine Operator $19.50/hr

Edwards Lifesciences Gruppe • Draper (UT)

Presencial
USD 25.000 - 29.000
Health/dental/vision on day 1
3 weeks vacation
2 weeks paid sick leave
+6