Assembly Technician II - 1st Shift - (Conversion)

PowerSecure, Inc.

Durham (NC)

On-site

USD 42,000 - 64,000

Full time

46 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

PowerSecure, Inc. is seeking an Assembly Technician II for 1st shift to assemble electrical and mechanical sub-assemblies for power generation equipment, following engineering drawings and performing wiring and final terminations.

You will read electrical drawings, mount Genset on its skid, connect load cables, and ensure torque and quality standards in a general manufacturing environment.

Qualifications

  • 1 year of manufacturing, field service or construction in the energy sector or similar industry preferred.
  • High School Diploma or equivalency preferred.
  • Must be able to read measuring devices to the 1/16th of an inch.
  • Electrical experience is highly preferred.

Responsibilities

  • Assemble complex electrical and mechanical sub-assemblies according to drawings, bills of material, schematics, and/or standard procedures.
  • Reference engineering documents and schematics to guide them in the assembling of the mechanical parts and the wiring of the controls and house power.
  • Read/ understand electrical drawing of both house power and communication wiring, properly landing/ labeling wiring in both TCC/ECC and house power panel.
  • Mount Genset on its skid using correct hardware and meeting torque requirements.
  • Mount all stands to skid (ECC, GBC, SCR, disconnect) and setting said components in place.
  • Connect exhaust parts and install them using correct hardware, gaskets and meeting all torque requirements.
  • Make load cables using correct gauge cable, lug, and proper crimp.
  • Fabricate CAN harnesses, fuel line, and block heater hoses.
  • Install all phases of load cables, bend install conduit and assemble def pumps, solenoids, and complex def systems.
  • Electrical wire and cable routing skills and the understanding of standard wiring workmanship as it pertains to quality.
  • Proficiency using a crimping tool, stripping tool; and multimeter as well as hand tools such as wrenches, ratchets, torque wrenches).
  • Collaborate and coordinate daily tasks with others to align priorities for smooth assembly operations.
  • Troubleshooting skills are crucial, may be required to drill and tap holes, crimps, screws, bolts, rivets, mount control units, and to provide openings for elements, wiring, and instruments using hand and power tools, machines, and equipment to ensure proper fitment and operation.
  • Assist with the integration, on-the-job training, and mentoring of new associates.
  • Additional responsibilities and objectives will be added as needed based on business and area of needs.

Skills

Electrical experience
Reading measuring devices

Education

High School Diploma or equivalency

Job description

If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs, you will find the contact information to request the appropriate accommodation by visiting the following our Accessibility Accomodation for Applicants page.

Assembly Technician II - 1st Shift - (Conversion)
Locations

Showing 1 location

  • On-site
  • Manufacturing & Engineering
  • Full-Time
  • Requisition #: ASSEM003496
Description

Job Summary:

The Assembly Tech 2 role is responsible for the assembly of power generation equipment including generators, enclosures, energy storage units, and PECs. This role is responsible for following work instructions created from engineering drawings to build power generation equipment to specified design. The Assembly Tech 2 position is tasked with the electrical wiring and final electrical terminations of the assembly build. They are also responsible for landing and terminating the load cables and other critical components of the power generation equipment manufacturing process. Assembly Tech 2 is someone who has demonstrated proficiency in the servicing/maintenance, assembly, or emplacement of power generation equipment; skills related to the electrical/mechanical servicing of heavy equipment will also be considered.

Minimum Qualifications: (Education, Experience, Knowledge and Skills):

  • 1 years of manufacturing, field service or construction in the energy sector or similar industry preferred.
  • High School Diploma or equivalency preferred.
  • Must be able to read measuring devices to the 1/16th of an inch.
  • Electrical experience is highly preferred.

Job Duties and Responsibilities:

  • Assemble complex electrical and mechanical sub-assemblies according to drawings, bills of material, schematics, and/or standard procedures.
  • Reference engineering documents and schematics to guide them in the assembling of the mechanical parts and the wiring of the controls and house power.
  • Read/ understand electrical drawing of both house power and communication wiring, properly landing/ labeling wiring in both TCC/ECC and house power panel.
  • Mount Genset on its skid using correct hardware and meeting torque requirements.
  • Mount all stands to skid (ECC, GBC, SCR, disconnect) and setting said components in place.
  • Connect exhaust parts and install them using correct hardware, gaskets and meeting all torque requirements.
  • Make load cables using correct gauge cable, lug, and proper crimp.
  • Fabricate CAN harnesses, fuel line, and block heater hoses.
  • Install all phases of load cables, bend install conduit and assemble def pumps, solenoids, and complex def systems.
  • Electrical wire and cable routing skills and the understanding of standard wiring workmanship as it pertains to quality.
  • Proficiency using a crimping tool, stripping tool; and multimeter as well as hand tools such as wrenches, ratchets, torque wrenches).
  • Collaborate and coordinate daily tasks with others to align priorities for smooth assembly operations.
  • Troubleshooting skills are crucial, may be required to drill and tap holes, crimps, screws, bolts, rivets, mount control units, and to provide openings for elements, wiring, and instruments using hand and power tools, machines, and equipment to ensure proper fitment and operation.
  • Assist with the integration, on-the-job training, and mentoring of new associates.
  • Additional responsibilities and objectives will be added as needed based on business and area of needs.

Physical Demands and Work Environment:

This position will require standing, stooping, bending, and limited lifting of up to 50lbs. Manual dexterity requires the ability to manipulate tools and small parts of machines.

General manufacturing environment which may include non-climate regulated workspaces

The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.

This position is not open to third party recruiters or agencies.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Assembly Technician I - 1st Shift - (Conversion)
Assembly Technician I - 1st Shift - (Conversion)

PowerSecure, Inc. • Durham (NC)

On-site
USD 21,000 - 30,000
Medical, dental, vision and life
401(k) plan
Vacation and PTO
+2
Assembly Tech I - 2nd Shift - (Conversion)
Assembly Tech I - 2nd Shift - (Conversion)

PowerSecure, Inc. • Durham (NC)

On-site
USD 25,000 - 39,000
Medical, dental, vision and life
401(k) matching
Paid time off
+4
Assembly Technician (hiring req)
Assembly Technician (hiring req)

PowerSecure Inc. • Durham (NC)

On-site
USD 42,000 - 66,000
Senior Assembly Technician - 2nd Shift - Hiring Req
Senior Assembly Technician - 2nd Shift - Hiring Req

PowerSecure, Inc. • Durham (NC)

On-site
USD 30,000 - 44,000
Medical insurance
Dental insurance
Vision insurance
+4
PowerGeneration Quality Control Technician - 2nd Shift
PowerGeneration Quality Control Technician - 2nd Shift

PowerSecure, Inc. • Durham (NC)

On-site
USD 28,000 - 39,000
Medical, dental, vision, and life
401(k) with company match
Vacation and PTO
+4
Electrical Assembly Technician
Electrical Assembly Technician

Central Power Systems & Serivces • Platte City (MO)

On-site
USD 45,000 - 65,000
Competitive Pay
Insurance benefits
401(k) Match
+9
Mechanical Technician, 1st Shift
Mechanical Technician, 1st Shift

EK • Fall River (WI)

On-site
USD 32,000 - 42,000
Mechanical Technician - 3rd Shift
Mechanical Technician - 3rd Shift

EK Machine • Fall River (WI)

On-site
USD 35,000 - 50,000
1st Shift Electrical Assembly Tech II – Power Gen
1st Shift Electrical Assembly Tech II – Power Gen

PowerSecure, Inc. • Durham (NC)

On-site
USD 42,000 - 64,000
Switchgear Technician 1 - 2nd Shift - (Conversion)
Switchgear Technician 1 - 2nd Shift - (Conversion)

PowerSecure, Inc. • Durham (NC)

On-site
USD 45,000 - 60,000
Medical, dental, vision and life 보험
Competitive pay and a matching 401 (k)
Vacation, Company Holidays, PTO
+2