Assembly Technician I - Day Shift

ETS-Lindgren GmbH; California (MO); On-site; USD 28,000 - 32,000; Full time

Benefits offered by this job

Health Insurance

Dental & Vision Insurance

401(k) with Company Match

Tuition Reimbursement

Employee Stock Purchase Program

Paid Time Off and Holidays

Bonus Program

Job summary

Crissair, Inc. in the aerospace sector seeks an assembler to assemble parts into complete units and rework as needed. You will read blueprints, set up tools, test valves, and ensure accurate part counts while maintaining safety and quality standards.

Responsibilities include preparing seats, reading gauges, and documenting data per ATP guidelines; you will participate in continuous improvement and ensure clean, safe workstations at all times.

Qualifications

• High School diploma or GED required with 0–6 months related training or experience.
• Read and interpret safety rules, operating instructions and procedure manuals.
• Ability to read simple correspondence and communicate in English.

Responsibilities

• Understand basic hydraulic concepts and function of gauges.
• Assemble and test check valves per blueprint and ATP requirements.
• Maintain accurate parts and part counts for each job.
• Perform seat preparations (burnishing, coining, cleaning) with supervision.
• Install internal components using arbor press and proper tooling.
• Report defective parts and rework per supervisor’s instructions.
• Operate test stands and record data per ATP requirements.
• Keep work area clean and maintain safety standards.

Skills

Reading diagrams

Attention to detail

Safety compliance

Basic hydraulic concepts

Quality mindset

Education

High School diploma or GED

0-6 months training/experience

Tools

Arbor press

Drill press

Test stands/fixtures

Job description

Assembles parts to form complete units or subassemblies using technical drawings, specialized tools and written directions. Reassembles or reworks units as needed

Since 1954, Crissair has manufactured high-quality precision components for nearly every airframe manufacturer and major subcontractor in the industry for both military and commercial aircraft. Crissair’s primary objective is designing, developing and manufacturing superior quality hydraulic, fuel and pneumatic system components of all complexity levels. Strict design specifications and rigorous quality criteria are the essential factors in Crissair’s success. Our deep knowledge and understanding of our markets and customers' industries allow us to adapt and deliver quality relevant products and services. This experience, together with our commitment to a customer-centric culture, is the reason why many of the world's largest companies turn to Crissair as a partner on everything from day-to-day operations to some of the most challenging Aerospace projects around the world.

Compensation and Benefits Offered

Actual base salary offered to the selected applicant will be based on their work location, qualifications, job related skills, relevant education, and training experience.

Base hourly rate range Minimum $20.00 - Maximum $23.00 - Depending on Experience.

Crissair offers the following benefits to regular full time employees:

• Dodgers Tickets Program – Access to company season tickets, available exclusively for employees throughout the season.
• Employee Appreciation Events – Quarterly experiences and lunches designed to recognize and celebrate employees, featuring unique offerings such as catered specialty meals and milestone celebration events.
• Highly Competitive Annual Bonus Program, with opportunities to significantly exceed target payouts based on company and individual performance
• Career Growth Opportunities within a stable and growing aerospace manufacturing organization
• Collaborative, Team-Oriented Culture where employee contributions are recognized and valued
• Medical, Dental, and Vision Insurance (PPO and HMO options available)
• Health Savings Account (HSA) or Flexible Spending Account (FSA)
• 401(k) Retirement Plan with Company Match
• Employee Stock Purchase Program with Company Match
• Company-Paid Basic Life Insurance
• Generous Paid Time Off, Sick Leave, Paid Holidays, Bereavement Leave, and Jury Duty Pay
• Parental and Caregiver Leave Programs
• Tuition Reimbursement and Professional Education Assistance
• Employee Assistance Program (EAP) for personal, family, and financial wellbeing
• Employee Appreciation & Recognition Programs, including birthdays, service awards, and special celebrations

Job Duties and Responsibilities

Other tasks and duties may be required as directed.

• Understand basic hydraulic concepts, the function of gauges, and Crissair assemblies in the hydraulic systems.
• Assemble and test check valves per blueprint and ATP requirements with minimal supervision.
• Maintain accurate parts and part count for each job.
• Perform seat preparations (burnishing, coining, and cleaning) with minimal supervision per the applicable work instruction.
• Install internal components using arbor press and/or proper tooling.
• Report defective parts and rework per supervisor’s instructions.
• Be familiar with proper fixtures and tooling required to perform job function.
• Set up test stands with appropriate test fixtures.
• Read pressure gauges and accurately record data to ATP requirements.
• Complete proper buy-off paperwork.
• Set up and operate manual and pneumatic automators and drill press for end fitting swedging and crimp rolls.
• Swedge fitting ends to form 37° and 45° angle or roll.
• Lock-wire and torque-seal parts.
• Follow daily dispatch reports and move jobs into ERP system.
• Seek and document lean process improvement ideas to improve the efficiency of the department.
• Maintain all hand tools in a clean and working condition.
• Notify supervisor of equipment that requires repair.
• Keep work station and test equipment clean and free of unnecessary debris.
• Properly handle and dispose of chemicals used.
• Maintain all safety standards and use safety equipment as required.
• Maintain 100% quality rating and less than .1% rejected components (caused by tech damage).

Qualification Requirements

• Education/Experience
• High School diploma or General Education Degree (GED)
• Three to six months related experience or training.
• Language Skills
• Good command of the English language, both written and spoken.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to write in simple correspondence.
• Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees.
• Math Skills
• Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s.
• Ability to perform operations using units of American money and weight measurement, volume, and distance.
• Reasoning Skills
• Ability to apply common sense understanding to carry out instructions furnished in written, verbal, or diagram form.
• Ability to deal with problems involving several concrete variables in standardized situations.
• Computer/ Office Skills

Physical Demands and Work Environment

• Physical Demands
• Frequent Activities: Standing, sitting, walking, typing, handling objects, talking/hearing, lifting/pushing/pulling up to 10 lbs.
• Occasional activities: Lifting/pushing/pulling up to 25 lbs, stooping, kneeling, crouching
• Rare activities: Climbing/balancing, lifting/pushing/pulling heavy weights (50–100+ lbs)
• Vision Requirements
• Frequent: Close vision
• Occasional: distance vision, color vision, peripheral vision, and focus adjustments
• Frequent exposure: Mechanical parts, fumes, airborne particles, toxic chemicals, and moderate-to-loud noise.
• Rare exposure: High places, outdoor weather, electrical shock, and vibrations, and very quiet noise levels.

Crissair, Inc. respects your privacy. To learn more, please read ourPrivacy Statement

Crissair, inc. Is an equal opportunity employer. Applicants are considered on the basis of skills, experience, and qualifications without regard to race, color, religion creed, sex, sexual orientation, age, national origin, ancestry, marital status, physical and mental disability, veteran status, medical condition or genetic information or characteristics, gender and gender identity, or any other legally protected status. Please note, the company provides goods and services to the us government under the International Traffic in Arms Regulations (ITAR) and must comply with the requirement that all employees be us citizens or permanent us residents with valid green cards. We comply with the Los Angeles County Fair Chance Ordinance for employers. We will not inquire about your criminal history until after a conditional offer of employment has been made. Any criminal history will be considered in accordance with applicable laws and regulations.

Crissair, inc. is committed to providing equal employment opportunities to all applicants, including those with disabilities. If you require a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact Human Resources at [phone].

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.