Assembly Technician I

Foundry Robotics Inc.

Emeryville (CA)

On-site

USD 30,000 - 39,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Foundry Robotics Inc. in Emeryville designs AI-native robotics for manufacturing and national-security hardware. As an Assembly Technician you’ll build, wire, test, and rework robots end-to-end, from prototype units to pilot production and last-minute ship-ready fixes.

You’ll work across levels (I, Sr., Lead) with escalating ownership, collaborate with design and engineering, maintain quality, documentation, and safe, audit-ready workspace on the factory floor.

Qualifications

  • High school diploma or equivalent with hands-on experience in electromechanical assembly, robotics, aerospace, medical device, or comparable low-volume, high-mix build environments.
  • Active J-STD-001 certification (Requirements for Soldered Electrical and Electronic Assemblies).
  • Active IPC-A-610 certification (Acceptability of Electronic Assemblies).
  • Proven ability to read and interpret electrical schematics, wiring diagrams, mechanical assembly drawings, and BOMs.
  • Proficiency with hand and power tools and measurement tools; strong soldering skills, including fine-pitch and through-hole rework.

Responsibilities

  • Build and assemble electromechanical robot subassemblies and full systems to IPC-A-610 and J-STD-001 acceptance criteria, holding first-pass yield high.
  • Solder, terminate, crimp, and route wiring and cable assemblies, and verify them with continuity and fault-isolation testing.
  • Move between build types - prototype, engineering validation, pilot production, and field rework - without compromising quality or pace.
  • Perform on-robot rework and debugging, isolating and resolving mechanical and electrical issues directly on the unit.
  • Read schematics, wiring diagrams, assembly drawings, and BOMs, catching discrepancies between drawing and hardware.
  • Run functional checkout and bring-up on completed robots, documenting results and escalating anomalies with detail.
  • Keep accurate, traceable build records, and maintain a safe, organized, ESD-compliant workspace.

Skills

Craftsmanship
Versatility
Diagnostic instinct
Ownership
Collaboration

Education

High school diploma or equivalent

Tools

IPC-A-610
J-STD-001
Multimeter
Calipers
Torque tools

Job description

About Us

Foundry Robotics is building an AI-native robotics manufacturing company focused on deploying advanced assembly and production capability for leading robotics companies and national-security-critical hardware. Basically, we're building robots that build robots. Factory OS is building software that runs factories. Our platform spans cloud backends, on-prem services, and edge devices deployed on the factory floor. The operators, supervisors, and managers who use our tools need interfaces that are fast, reliable, and intuitive-even when network conditions aren't perfect and the environment is demanding. This role is 100% in-person at our office in Emeryville.

The Role

Assembly Technicians are the hands that turn designs into working machines. You will build, wire, assemble, test, and rework robots across a range of programs - prototype units one week, pilot production builds the next, and a same-day fix on a robot that has to ship tomorrow. No two builds look exactly alike, and the work changes as the platforms evolve. We're hiring at three levels through this single posting : Assembly Technician I, Sr. Assembly Technician, and Technician Lead. The core work is the same at every level; what changes is how independently you operate, how much you own, and how much the team leans on you to raise the bar. We'll level you based on your experience and the interview process. Whatever the level, you will own your builds end to end: quality, documentation, and the call to stop and flag something when it isn't right.

What You'll Do (all levels)
  • Build and assemble electromechanical robot subassemblies and full systems to IPC-A-610 and J-STD-001 acceptance criteria, holding first-pass yield to a high, measurable standard.
  • Solder, terminate, crimp, and route wiring and cable assemblies, and verify them with continuity and fault-isolation testing before anything moves downstream.
  • Move fluidly between build types - prototype, engineering validation, pilot production, and field rework- without losing quality or pace.
  • Perform on-robot rework and debugging, isolating and resolving mechanical and electrical issues directly on the unit.
  • Read and work from schematics, wiring diagrams, assembly drawings, and BOMs, and catch the discrepancies between the drawing and the hardware in front of you.
  • Run functional checkout and bring-up on completed robots, documenting results and escalating anomalies with enough detail to act on.
  • Keep accurate, traceable build records, and keep the workspace safe, organized, ESD-compliant, and audit-ready.
The Levels
Assembly Technician I - 3-5 years of experience

Executes builds from drawings and travelers with light oversight; solid soldering, wiring, and mechanical assembly fundamentals.

Troubleshoots common electrical and mechanical faults and knows when to elevate.

Owns the quality and documentation of your own work.

Sr. Assembly Technician - 5-9 years of experience

Everything above, fully independently: takes an unfamiliar build with incomplete documentation and figures it out.

Owns complex rework and debug, and drives process, fixturing, and documentation improvements alongside engineering. Surfaces design and process issues early enough to influence design-for-manufacturability decisions; mentors Technician I's.

Technician Lead - 10+ years of experience

Leads builds end to end across programs: sequencing, handoffs, and the quality standard for the floor.

Primary technician point of contact for design and manufacturing engineering on build readiness and DFM.

Trains the technician team and sets the standard for how work gets done.

What We’re Looking For
  • Craftsmanship: you treat error-free, repeatable work as the baseline and take real pride in what you hand off.
  • Versatility: you are comfortable being handed an unfamiliar build with incomplete documentation and figuring it out.
  • Diagnostic instinct: you isolate opens, shorts, binding, and misalignment methodically rather than by trial and error.
  • Ownership: you finish what you start, flag problems early, and hold yourself to a standard before anyone has to ask.
  • Collaboration: you partner naturally with design and manufacturing engineers, and you give feedback that makes the next revision better.
Minimum Requirements (all levels)
  • High school diploma or equivalent, with hands-on experience in electromechanical assembly, robotics, aerospace, medical device, or comparable low-volume, high-mix build environments at the level listed above.
  • Active J-STD-001 certification (Requirements for Soldered Electrical and Electronic Assemblies).
  • Active IPC-A-610 certification (Acceptability of Electronic Assemblies).
  • Proven ability to read and interpret electrical schematics, wiring diagrams, mechanical assembly drawings, and BOMs.
  • Proficiency with hand and power tools (torque drivers, crimpers, strippers, heat guns) and measurement tools (multimeter, calipers). Strong soldering skills, including fine-pitch and through-hole rework
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Assembly Technician I
Assembly Technician I

Foundry Robotics • Emeryville (CA)

On-site
USD 60,000 - 84,000
Comprehensive medical, dental, vision
401(k) with company match
Paid time off
+1
Electro-Mechanical Assembler
Electro-Mechanical Assembler

Techoundsllc • Irvine (CA)

On-site
USD 60,000 - 84,000
Robot Build Technician
Robot Build Technician

Physical Intelligence • Fremont (CA)

On-site
USD 60,000 - 80,000
Senior Assembly Technician
Senior Assembly Technician

Foundry Robotics • Emeryville (CA)

On-site
USD 55,000 - 90,000
Medical benefits
Dental & Vision
PTO & Holidays
+2
Assembly Tech
Assembly Tech

PDS Inc, LLC • Wilmington (MA)

On-site
USD 36,000 - 52,000
Electro Mechanical Technician 4
Electro Mechanical Technician 4

EMC Technologies Inc. • Fall River (MA)

Hybrid
USD 41,000 - 48,000
Assembly Technician
Assembly Technician

JSM Consulting Inc. • San Francisco (CA)

On-site
USD 28,000 - 39,000
Hardware Technician
Hardware Technician

Eka Robotics, Inc. • Boston (MA)

On-site
USD 65,000 - 90,000
Hardware Technician
Hardware Technician

Eka • Cambridge (MA)

On-site
USD 60,000 - 85,000
Hardware Technician
Hardware Technician

Eka • Boston (MA)

On-site
USD 65,000 - 90,000