Assembly Technician - Electrical

Sapphire Technologies group

Cypress (CA)

On-site

USD 34,000 - 46,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Paid vacation
Paid sick time
Health benefits
401(k) retirement plan with company 1:

Job summary

SapphireTechnologies in Cypress, CA is seeking a Power Electronics Assembler to join our on-site manufacturing team. You will assemble the Power Electronics, including the Variable Speed Drive and Brake Resistor, and perform fabrication, assembly, and testing to support the operation of a Turboexpander Generator.

Requirements include a High School Diploma or GED and at least 2 years of electrical manufacturing experience; reading electrical schematics, attention to detail, and teamwork are

Qualifications

  • High School Diploma or GED.
  • 2+ years electrical manufacturing experience.
  • Must be able to read and understand electrical schematics.
  • Ability to manage time and work well under pressure.
  • Attention to detail is a must; perform all tasks with a high level of accuracy.
  • Good problem-solving skills.
  • Teamplayer with good communication skills.

Responsibilities

  • Route wires, assemble and install electrical and electronic components. Follow assembly instructions, prints, and specifications to determine component parts and assembly sequences of electromechanical parts.
  • Analyze schematics and drawings of electrical systems for the purpose of determining the efficiency and safety of the installation.
  • Inspect, test and adjust completed units to ensure that units meet specifications, tolerances and customer order requirement.
  • Diagnose causes of electrical problems or failures for the purpose of identifying equipment repairs.
  • Manufacture custom wiring harness to fit equipment.
  • Cut wire and or cable to specified lengths and terminate to components.
  • Crimp terminals and lugs to wire ends, using hand or machine crimping device.
  • Route, comb, twist, tie-wrap, and attach wire to terminal points, according to layout, using soldering gun and hand tools.
  • Use testing devices such as ohm meters, voltmeters, and ammeters.
  • Conduct functional and continuity tests of electrical assemblies, components, wire harness and plugs, using ohmmeter, test lights and other electrical testing instruments.
  • Connect wiring to accessories, such as relays, circuit breakers, connectors, switches, circuit breakers, buss panels and reconnection boards.
  • Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
  • Position, align and adjust parts for proper fit and assembly.
  • Fabricate and form parts, coils, and structures according to specifications, using drills, calipers, cutters, and saws.
  • Ability to use hand and power tools, as well as operate forklifts and cranes.
  • Follow all safety procedures in handling equipment and machines.
  • Field support to assist in troubleshooting and commissioning, as needed.

Skills

Reading electrical schematics
Time management
Attention to detail
Problem solving
Team player
Good communication

Education

High School Diploma or GED

Tools

Soldering
RS-232/485 communication
MODBUS protocols
Variable frequency drives (VFDs)
AC-DC conversion equipment
Motor drives

Job description

  • Compensation The annual salary range for this position is from $24.55/hour to $33.21/hour; salary is commensurate with level of experience.
  • Industry Manufacturing
  • City Cypress
  • State/Province California
  • Country United States
  • Job Type Full time
Job Description

About Us:

SapphireTechnologies delivers power and cooling to energy infrastructure. Our FreeSpin®In-line Turboexpander recovers the energy wasted when high-pressure gas isstepped down, converting it into clean electricity and low-temperature cooling.To better serve our customers in the data center industry, we are now expandingour high-speed turbomachinery offerings into oil-free compressors for chillingapplications.

Ourhands-on engineering team take products from concept to field deployment, withwork spanning rotating machinery, power electronics, controls, and systemsintegration.

We are amission-driven organization with one common goal: building a more sustainableworld. Our employees are our biggest asset, and we are looking for changeagents to join us on our journey.

PositionSummary:

Thisposition is responsible for assembling the Power Electronics, which includesthe Variable Speed Drive (VSD) and Brake Resistor, to support the operation ofa Turboexpander Generator. The job willrequire fabrication, assembly, and some testing of the Power Electronics inaccordance with applicable drawings, schematics, specifications, and processinstruction for production and development.

Key Responsibilities:

  • Route wires, assemble,and install electrical and electronic components.Follow assemblyinstructions, prints, and specifications to determine component parts andassembly sequences of electromechanical parts.
  • Analyzeschematics and drawings of electrical systems for the purpose of determiningthe efficiency and safety of the installation .
  • Inspect,test and adjust completed units to ensure that units meet specifications,tolerances and customer order requirement.
  • Diagnose causes ofelectrical problems or failures for the purpose of identifying equipmentrepairs.
  • Manufacture customwiring harness to fit equipment.
  • Cut wire and or cable tospecified lengths and terminate to components.
  • Crimp terminal and lugsto wire ends, using hand or machine crimping device.
  • Route, comb, twist, tiewrap, and attach wire to terminal points, according to layout, using solderinggun and hand tools.
  • Usetesting devices such as ohm meters, voltmeters, and ammeters.
  • Conduct functional andcontinuity tests of electrical assemblies, components, wire harness and plugs,using ohmmeter, test lights and other electrical testing instruments.
  • Connect wiring toaccessories, such as relays, circuit breakers, connectors, switches, circuitbreakers, buss panels and reconnection boards.
  • Drill, tap, ream,countersink, and spot-face bolt holes in parts, using drill presses andportable power drills.
  • Position, align andadjust parts for proper fit and assembly.
  • Fabricateand form parts, coils, and structures according to specifications, usingdrills, calipers, cutters, and saws.
  • Ability to use hand andpower tools, as well as operate forklifts and cranes.
  • Followall safety procedures in handling equipment and machines.
  • Fieldsupport to assist in troubleshooting and commissioning, as needed.
BasePay Range:

Theinformation below is a general guideline. Actual compensation depends on thecandidate’s experience and qualifications, as well as market and businessfactors.

Salaryrange: $24.55/hour - $33.21/hour

Requirements

Required Experience:

  • High School Diploma orGED
  • 2+ years electrical manufacturingexperience
  • Must be able to read andunderstand electrical schematics.
  • Ability to manage time& work well under pressure.
  • Attention to detail is amust; perform all tasks with a high level of accuracy.
  • Good problem-solvingskills
  • Teamplayer with good communication skills

Preferred Qualifications:

  • Hands-onexperience with variable frequency drives is a benefit
  • 2 years soldering experience.
  • Experiencewith RS-232/485 communication and MODBUS protocols
  • Experiencewith AC-DC conversion equipment and motor drives
  • Experiencein a clean energy company
  • Experienceworking in a small to mid-size company where the efforts of one or twoindividuals are very impactful.

PhysicalDemands:

Thephysical demands described here are representative of those that must be met byan employee to successfully perform the essential functions of this job.

Whileperforming the duties of this job, the employee is regularly required to sit;use hands to finger, handle, or feel and talk or hear. The employee is requiredto stand, walk, and reach with hands and arms. The employee must occasionallylift and/or move up to 50 pounds. Specific vision abilities required by thisjob include close vision, peripheral vision, depth perception and ability toadjust focus.


Candidate must be able to travel up to 5% of the time to support fieldoperations as necessary. Employee must occasionally lift and/or move up to 50pounds.

This roleis an on-site role in a manufacturing facility. Appropriate personal protectiveequipment and adherence to site safety requirements are mandatory.

We offer acompetitive benefits package designed to support the health, well-being, andfinancial security of our employees. Eligible team members receive paidvacation, paid sick time, comprehensive health benefits, and participation in a401(k) retirement plan with company match.

AdditionalInformation:

The abovejob description is not intended to be an all-inclusive list of duties andstandards of the position. Incumbents will follow other instructions andperform other related duties as assigned by their supervisor. Managementreserves the right to change, rescind, add, or delete the duties andresponsibilities of positions within this job classification at any time.

SapphireTechnologies is an equal opportunity employer and prohibits discriminationbased on race, color, religion, national origin, gender, sexual orientation,gender identity, age, physical or mental disability, or veteran status. Thispolicy applies to recruiting, hiring, transfers, promotions, terminations,compensation, and benefits.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Assembly Technician - Electrical
Assembly Technician - Electrical

Sapphire Technologies • Cypress (CA)

On-site
USD 34,000 - 46,000
Paid vacation
Paid sick time
Health benefits
+1
Assembly Technician - Electrical
Assembly Technician - Electrical

Sapphire Technologies, Inc. • Cypress (CA)

On-site
USD 34,000 - 46,000
Assembly Technician - Mechanical
Assembly Technician - Mechanical

Sapphire Technologies, Inc. • Cypress (CA)

On-site
USD 34,000 - 45,000
Assembly Technician - Mechanical
Assembly Technician - Mechanical

Sapphire Technologies • Cypress (CA)

On-site
USD 34,000 - 46,000
Paid vacation
Paid sick time
Comprehensive health benefits
+1
Assembly Technician - Mechanical
Assembly Technician - Mechanical

Sapphire Technologies group • Cypress (CA)

On-site
USD 34,000 - 46,000
Paid vacation
Paid sick time
Health benefits
+1
Assembly Technician - Mechanical
Assembly Technician - Mechanical

Sapphire Technologies • Cypress (CA)

On-site
USD 34,000 - 46,000
Vacation time
Sick time
Health benefits
+1
General Application
General Application

Sapphire Technologies group • Cypress (CA)

On-site
USD 70,000 - 110,000
Paid vacation
Paid sick time
Health benefits
+1
Supply Chain & Contract Manufacturing Manager
Supply Chain & Contract Manufacturing Manager

Sapphire Technologies • Cypress (CA)

On-site
USD 127,000 - 172,000
Paid vacation
Comprehensive health benefits
401(k) with company match
Lead Mechanical Design Engineer – High-Speed Rotating Machinery
Lead Mechanical Design Engineer – High-Speed Rotating Machinery

Sapphire Technologies group • Cypress (CA)

On-site
USD 100,000 - 130,000
Paid vacation
401(k) retirement plan with company match
Comprehensive health benefits
Quality & EHS Manager
Quality & EHS Manager

Sapphire Technologies • Cypress (CA)

Hybrid
USD 119,000 - 160,000
Health benefits
401(k) retirement plan with company‑in
Paid vacation
+1