Assembler (Cable Shop)

Teledyne Technologies Incorporated; Georgia; On-site; USD 30,000 - 42,000; Full time

Job summary

Teledyne Technologies Incorporated seeks an entry-level mechanical assembler to perform bench/line subassembly under supervision. You will follow drawings, interpret BOMs, and assemble parts using a range of hand and power tools while performing basic testing for quality.

The role emphasizes safety, precision, and teamwork in a high-reliability environment. Requires a high school diploma and some vocational training; experience with basic measurements and soldering is a plus.

Qualifications

• Requires a high school diploma and vocational/technical training.
• Ability to read schematics and work from drawings and BOMs.
• Basic math and precision measurement skills.

Responsibilities

• Follow production drawings and verbal instructions under close supervision.
• Interpret schematics, drawings, and bills of materials to assemble parts.
• Use hand and power tools for fitting and assembly; perform basic tests.
• Operate presses/riveting machines and inspect parts for quality.

Skills

Read schematics

Blueprint interpretation

Mechanical assembly

Math and measurement

Tool handling

Quality testing

Safety procedures

Education

High school diploma or equivalent

Tools

Multimeter

Oscilloscope

Spectrum analyzer

Torque wrench

Soldering iron

Job description

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.

We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins.

Job Description

Summary:

Under close supervision, performs a wide variety of repetitive and non-repetitive bench or line mechanical subassembly and assembly operations of a semi-skilled nature to produce products, making required minor adjustments in the assemblies as needed.

Essential Duties and Responsibilities include the following (other duties may be assigned):

• Follows production drawings, sample assemblies and verbal instructions with close supervision. Understands and applies established acceptable workmanship practices to all facets of mechanical assembly.
• Interprets and works from schematics, drawings, work instructions and bills of material to understand the required parts and steps needed to complete the assigned assembly.
• Makes accurate mathematical calculations and uses precision measuring instruments as required.
• Uses a wide variety of hand and power tools to perform skilled fitting and assembly work. Inspect parts and performs basic tests.
• Tends machines, such as arbor presses or riveting machine, to perform force fitting or fastening operations on assembly line.
• Works at different workstations as production needs require. Works on lines where tasks vary as different model of same article moves along line.
• Performs basic testing, assembly and or disassembly of mechanical assemblies using both traditional and non-traditional tooling such as multimeter, oscilloscope, spectrum analyzer, power supply, function generator, LCD meter, screwdriver, torque wrench, standard wrench, etc.
• Works on assembled components, requiring manual dexterity and the ability to work with simple hand tools, soldering equipment, volt meters and other related test instrumentation. Knowledge of cleaning, lead preparation, component mounting, parts orientation.
• Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device.
• Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place.
• May perform other simple assembly tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies.
• Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics.
• May perform hand soldering using a soldering iron.
• May perform work (soldering and general inspection) under microscope.
• Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards.
• Troubleshoots and replaces defects of finished products.
• Reworks and repairs defective units rejected by inspection or test personnel.
• Follows safety procedures in the use and handling of flammable and hazardous chemicals required to meet all cleanliness specifications.
• Must be able to follow specific procedures and detailed instructions completely.
• Ensures that quality checks are completed throughout the manufacturing process.
• Records information on production records, logs and other report forms.

Supervisory Responsibilities

This job has no supervisory responsibilities.

To perform the job successfully, an individual should demonstrate the following competencies:

• Oral/Written Communication – Listens and gets clarification; Responds well to questions; Records data; Writes clearly and informatively; Able to read and interpret written information.
• Teamwork – Gives and welcomes feedback; Contributes to building a positive team spirit; Supports everyone’s efforts to succeed.
• Ethics – Treats people with respect; Works with integrity and ethically.
• Organizational Support – Follows policies and procedures; Supports organization’s goals and values.
• Planning/Organizing – Uses time efficiently.
• Professionalism – Approaches other in a tactful manner; Accepts responsibility for own actions; Follows through on commitments.
• Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality.
• Quantity – Meets productivity standards; Completes work in a timely manner; Strives to increase productivity.
• Safety and Security – Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and material properly.
• Adaptability – Adapts to changes in the work environment.
• Dependability – Follows instructions, responds to management direction.
• Attendance/Punctuality – Is consistently at work and on time.Initiative – Asks for and offers help when needed.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Education and/or Experience:

Requires a high school diploma and some degree of vocational or technical training; 0-2 years of directly related experience.

Language Skills

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence.

Mathematical Skills

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

Reasoning Ability

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.

Computer Skills:

To perform this job successfully, an individual should be able to enter time and data into a computer system. An individual may require knowledge of database software; inventory software; manufacturing software; spreadsheet software and/or word processing software.

Other Essential Duties

• Perform manufacturing/assembly, repair, testing, inspecting of marine seismic cables and related products/components.
• Prepare marine seismic cables and components for storage and shipping.
• Cross-train to work on other Cable Shop lines.
• Follows all import/export requirements, consulting with facility import/export personnel as required.

Other Qualifications

• U.S. Person for access to ITAR-Controlled Technical Data.

ITAR regulations dictate that information and material pertaining to defense and military related technologies may only be shared with US Persons unless authorization from the Department of State is received or a special exemption is used.

A \"U.S. person\" can be

A U.S. citizen; A permanent resident who does not work for a foreign company, a foreign government, or a foreign governmental agency/organization; A political asylee; A part of the U.S. government, or A corporation, business, organization, or group that is incorporated in the United States under U.S. law.

A foreign person is any person who is not a lawful permanent resident of the US and includes foreign governments and organizations.

Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions.

Teledyne is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Teledyne Technologies Incorporated specializes in advanced electronic components and systems for defense, aerospace, industrial, and environmental applications, ensuring performance and reliability in critical markets.

Software Development Technology, Information and Internet Technology, Information and Media