Assembler (1st & 3rd Shift) - Entry level pay starting at $19.00/hr + Shift Differential

Twin City Fan Companies, Ltd.

Mitchell (SD)

On-site

USD 21,000 - 30,000

Full time

35 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Twin City Fan Companies, Ltd. is seeking an assembler for our Mitchell, SD manufacturing team. You will use hand and power tools to assemble products, operate rigging devices, and follow standard work instructions.

This full-time on-site role requires reading shop orders and blueprints, and maintaining safety and quality. We value teamwork, good housekeeping, and the ability to work in a fast-paced environment.

Qualifications

  • Typically requires a high school diploma and up to 2 years of experience.
  • Read and understand shop orders and blueprints, safety rules, standard work instructions written in English.
  • Basic math skills to include addition, subtraction, multiplication, and division in all units of measure including whole numbers, fractions, and decimals. Ability to read a tape measure.
  • Ability to use hand tools in a safe and proper manner.
  • Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack.

Responsibilities

  • Uses a variety of hand/power tools to correctly assemble products.
  • Operates rigging and lifting devices safely.
  • Assembles assigned product parts in accordance with standard work instructions.
  • Reports problems with quality, equipment, and material to supervisors.
  • Complete documentation and work in a timely manner.
  • Work in both individual and team environment.
  • Maintains good housekeeping and clean work areas in assigned space.
  • Act, live, and behave by TCF Core Values.
  • Additional duties may be assigned, dependent upon location and product line.

Skills

Read shop orders
Read blueprints
Basic math
Use hand tools
Safety rules
English literacy
Team environment

Education

High school diploma

Tools

Forklift
Overhead crane
Electric pallet jack

Job description

Job Details
Posting Details
  • Posted on November 13, 2026
Locations
  • Showing 1 location
  • Mitchell, SD 57301, USA
  • Manufacturing
  • Full-Time
  • Requisition #: ASSEM005536
Description

KEY RESPONSIBILITIES

  • Uses a variety of hand/power tools to correctly assemble products.
  • Operates rigging and lifting devices safety
  • Assembles assigned product parts in accordance with standard work instructions.
  • Reports problems with quality, equipment, and material to supervisors.
  • Complete documentation and work in a timely manner
  • Work in both individual and team environment
  • Maintains good housekeeping and clean work areas in assigned space
  • Act, live, and behave by TCF Core Values
  • Additional duties may be assigned, dependent upon location and product line

QUALIFICATIONS

  • Typically requires a high school diploma and up to 2 years of experience
  • Read and understand shop orders and blueprints, safety rules, standard work instructions written in English.
  • Basic math skills to include addition, subtraction, multiplication, and division in all units of measure including whole numbers, fractions, and decimals. Ability to read a tape measure.
  • Ability to use hand tools in a safe and proper manner.
  • Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack.

CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING

The following certifications and training, if required, will be provided by the company:

  • JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations,Riggingsafety
  • Understands SQDE Metrics, LDMS, Issue boards, 5S

PHYSICAL DEMANDS/WORKING CONDITIONS

To successfully perform the essential function of this position, employees must have the ability to:

  • Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds; and occasionally lift/move up to 50 pounds.
  • Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear.
  • Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space.
  • Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception.

WORK ENVIRONMENT:

While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud.

SAFETY

Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner.

This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Assembler (1st & 2nd Shift) - Entry level pay starting at $19.00/hr + Shift Differential
Assembler (1st & 2nd Shift) - Entry level pay starting at $19.00/hr + Shift Differential

Twin City Fan & Blower • Mitchell (SD)

On-site
USD 38,000 - 52,000
Assembler (1st & 2nd Shift) - Entry level pay starting at $19.00/hr + Shift Differential
Assembler (1st & 2nd Shift) - Entry level pay starting at $19.00/hr + Shift Differential

Twin City Fan Companies, Ltd. • Mitchell (SD)

On-site
USD 22,000 - 33,000
Materials Operator (1st or 3rd shift) - Entry level pay starting at $18.50/hr +shift differential for 3rd shift
Materials Operator (1st or 3rd shift) - Entry level pay starting at $18.50/hr +shift differential for 3rd shift

Twin City Fan Companies • Mitchell (SD)

On-site
USD 22,000 - 29,000
Production Worker (1st or 3rd Shift openings) - Entry level pay starting at $18.00/hr + shift differential for 3rd shift)
Production Worker (1st or 3rd Shift openings) - Entry level pay starting at $18.00/hr + shift differential for 3rd shift)

Twin City Fan Companies • Mitchell (SD)

On-site
USD 21,000 - 30,000
Machine Operator (1st, 2nd or 3rd Shift) - Entry level pay starting at $19.00/hr +shift differential for 2nd or 3rd shift
Machine Operator (1st, 2nd or 3rd Shift) - Entry level pay starting at $19.00/hr +shift differential for 2nd or 3rd shift

Twin City Fan Companies, Ltd. • Mitchell (SD)

On-site
USD 21,000 - 30,000
Materials Operator (1st or 3rd shift) - Entry level pay starting at $18.50/hr +shift differential for 3rd shift
Materials Operator (1st or 3rd shift) - Entry level pay starting at $18.50/hr +shift differential for 3rd shift

Twin City Fan Companies, Ltd. • Mitchell (SD)

On-site
USD 19,000 - 29,000
Break Press Operator (1st, 2nd or 3rd Shift) - Entry level pay starting at $19.00/hr +shift differential for 2nd and 3rd shift
Break Press Operator (1st, 2nd or 3rd Shift) - Entry level pay starting at $19.00/hr +shift differential for 2nd and 3rd shift

Twin City Fan Companies, Ltd. • Mitchell (SD)

On-site
USD 22,000 - 33,000
Production Worker (1st or 3rd Shift openings) - Entry level pay starting at $18.00/hr + shift differential for 3rd shift)
Production Worker (1st or 3rd Shift openings) - Entry level pay starting at $18.00/hr + shift differential for 3rd shift)

Twin City Fan Companies, Ltd. • Mitchell (SD)

On-site
USD 25,000 - 36,000
Assembler (Days/Nights/Weekends) - Entry level pay starting at $19.00/hr + nights and weekend shift differential
Assembler (Days/Nights/Weekends) - Entry level pay starting at $19.00/hr + nights and weekend shift differential

Twin City Fan Companies, Ltd. • Brookings (SD)

On-site
USD 36,000 - 54,000
Part-Time Assembler (Nights - Entry level pay starting at $19.00/hr + nights shift differential
Part-Time Assembler (Nights - Entry level pay starting at $19.00/hr + nights shift differential

Twin City Fan & Blower • Brookings (SD)

On-site
USD 36,000 - 54,000