Assembler

Lehigh Heavy Forge Corporation; Michigan City (IN); On-site; USD 42,000 - 64,000; Full time

Job summary

Hitachi Global Air Power US, LLC in Michigan City, IN is seeking an assembler to build compressors and subsystems. You will follow WCI, P&I, WD and BOM instructions, perform wiring, testing and packing duties, and ensure quality and safety in a fast-paced production environment.

The role requires 2+ years of manufacturing assembly experience, basic math and blueprint reading skills, and the ability to lift and handle tools and components.

Qualifications

• High School education or equal and a minimum of two years post high school training/experience.
• Minimum of 2 years' previous manufacturing assembly required.
• Basic computer skills required.
• Basic reading skills necessary to perform the functions of the job.
• Mechanical assembly ability, ability to read simple blueprints, wiring diagrams/drawings preferred.
• Prior forklift experience or completion of forklift training preferred.
• Working with various hand and pneumatic tools and various measuring tools.
• Ability to read blueprints.
• Knowledge of basic electricity and wiring diagrams/drawings.

Responsibilities

• Assemble compressors in assigned area using Work Center Instructions (WCI), P&I, Wiring Diagram (WD) and BOM and assembly drawings.
• Apply decals to machines, as needed.
• Utilize Andon signals per guidelines.
• Measure, cut, bend, fit small tubing to machine. Install tubing and fittings using hyferset.
• Install foam insulation on tubing and controls.
• Install heat trace tape to tubing and controls and/or bend large tubing with power bender per print or custom fit.
• Assemble frames in assigned area, per BOM or WCI.
• Assemble separator tanks in assigned area, using BOM, P&I or WCI.
• Assemble components to engines in assigned area, per BOM or WCI.
• Connect motor leads and connectors to power source per WD and BOM.
• Wire machines or packages, terminating wire harnesses or basic wiring in assigned area, per WD.
• Assemble couplings on engines/motors and air ends in assigned area, per WCI, BOM.
• Inspect finished machines at end of process in assigned area, and receive them into finished goods.
• Align motor, air end and coupling in assigned area, using calipers, dial indicators and straight edge.
• Assemble and insulate enclosures and install on machine in assigned area, per BOM, WCI.
• Assemble mounted or remote cooler packs in assigned area, per BOM, WCI, WD and P&I.
• Terminate wiring for controls, basic panels, fan motors, etc. in assigned area, per WD and P&I.
• Test electrical controls/components per WCI, WD and P&I.
• Assemble and/or rework compressor packages and equipment.
• Requisition and stock materials and supplies.
• Keep equipment and work area clean and orderly.

Skills

Basic reading skills

Basic computer skills

Read blueprints

Mechanical assembly

Reading wiring diagrams

Forklift experience

Education

High School education or equal

Two years post high school training/experience

Tools

WCI

P&I

WD

BOM

Calipers

Dial indicators

Job description

Location

Michigan City, Indiana, United States

Job ID

R0133672

Date Posted

2026-06-16

Company Name

HITACHI GLOBAL AIR POWER US, LLC

Profession (Job Category)

Production & Skilled Trades

Job Schedule

Full time

Remote

No

Job Description

Hitachi Global Air Power

We build the machines that power industry. We are Hitachi Global Air Power, a leading global industrial compressed air manufacturer driving the innovations that keep the world moving.

From our headquarters in Michigan City, Indiana, our compressed air solutions power manufacturing operations all around the globe: from food and beverage to life-saving pharmaceuticals and cutting edge semi-conductor chips. Our portable compressors provide the air power to build roads and bridges, lay pipelines and aid in oil and gas mining and production.

We are a team of innovators, engineers, and quality experts with a shared vision to create the next generation of efficient, environment-forward compressed air solutions that meet the demands of today, while boldly contributing to a sustainable, circular economy. With more than 58 years of legacy and trusted performance through our brands - Hitachi, Sullair, and Champion (Australia), we are proud of our reputation for reliability, durability, and performance and groundbreaking engineering.

Join us in building a future where your work has an impact. At Hitachi Global Air Power, you will be part of a global network that is shaping the future of industrial power.

Summary of the position

The Assembler position requires an individual to perform several duties as defined within the Assembly family.

This position is located at Hitachi Global Air Power in Michigan City, Indiana, and reports to the Production Supervisor.

Duties and responsibilities

• Assemble compressors in assigned area using Work Center Instructions (WCI), Piping & Instrumentation instructions (P&I), Wiring Diagram (WD) and Bill of Material (BOM) and assembly drawings.
• Apply decals to machines, as needed.
• Utilize Andon signals per guidelines.
• Measure, cut, bend, fit small tubing to machine. Install tubing and fittings using hyferset.
• Install foam insulation on tubing and controls.
• Install heat trace tape to tubing and controls AND/OR bend large tubing with power bender per print or custom fit (Industrial).
• Assemble frames in assigned area, per BOM, or WCI.
• Assemble separator tanks in assigned area, using BOM, P&I or WCI.
• Assemble components to engines in assigned area, per BOM or WCI.
• Connect motor leads and connectors to power source per WD and BOM.
• Wire machines or packages, terminating wire harnesses or basic wiring in assigned area, per WD.
• Assemble couplings on engines/motors and air ends in assigned area, per WCI, BOM.
• Inspect finished machines at the end of process in assigned area, and receive them into finished goods.
• Align motor, air end and coupling in assigned area, using calipers, dial indicators and straight edge.
• Assemble and insulate enclosures and install on machine in assigned area, per BOM, WCI.
• Assemble mounted or remote cooler packs in assigned area, per BOM, WCI, WD and P&I.
• Terminate wiring for controls, basic panels, fan motors, etc. in assigned area, per WD and P&I.
• Test electrical controls/components per WCI, WD and P&I.
• Assemble and/or rework compressor packages and equipment.
• Requisition and stock materials and supplies.
• Keep equipment and work area clean and orderly.

Qualifications

Education

• High School education or equal and a minimum of two years year post high school training/experience.

Professional experience

• Minimum of 2 years' previous manufacturing assembly required.
• Basic computer skills required.
• Basic reading skills necessary to perform the functions of the job.
• Mechanical assembly ability, ability to read simple blueprints, wiring diagrams/drawings preferred.
• Prior forklift experience or completion of forklift training preferred.
• Working with various hand and pneumatic tools and various measuring tools.
• Ability to read blueprints.
• Knowledge of basic electricity and wiring diagrams/drawings.

Key behaviors

• Lifting up to 35 lbs.
• Lifting over 35 lbs. requires a lifting device, crane/hoist, or assistance from another associate.
• Physically able to lift, bend, stoop, climb, reaching, kneeling and working in awkward positions.
• Work involves considerable stooping, bending, and kneeling.
• Working with cranes, presses, cleaning solvents, sharp edges on parts, hot materials, electrical components, and moving parts by carts.
• Working with high air pressure equipment, and at times extreme noise.
• Safety Requirements
  • Must understand and comply with the 5 Cardinal Rules.
  • Participate in EHS quarterly audits, if required.
  • Required to wear the proper PPE equipment for the work area.
  • Required to attend scheduled toolbox and safety meetings.
  • Must immediately report injuries or unsafe conditions to the supervisor.

Direct reports

• N/A

The successful candidate is responsible for complying with Hitachi Global Air Power US Code of Ethics and related policies. In performing the job, the incumbent shall take all steps necessary to comply with our safety rules and requirements and must actively support the organization's efforts to meet and exceed its goals of creating and maintaining a safe workplace.

This description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion.

Hitachi Global Air Power US is an equal opportunity employer and will not discriminate based on race, religion, color, age, gender, sexual orientation, national origin, genetic information, veteran status, physical or mental disability, or other protected categories under applicable law, whether in recruitment, employment, promotion, transfer, compensation, or other conditions of employment.