2nd Shift - Water Jet Operator

Precision Castparts; Irvine (CA); On-site; USD 65,000 - 90,000; Full time

Job summary

Precision Castparts in Irvine, CA seeks a Level II Machinist to operate 2-5 axis CNC cells or standalone machines, perform basic setup, fixtures, and tool offsets, and load CNC programs. The role may focus on CNC, Turning, or Screw Machine operations to produce aerospace components.

You will read blueprints, measure parts, adjust controls, and perform in-process and final inspections to ensure tight tolerances and high quality.

Qualifications

• Read blueprints, engineering drawings and specs to determine setup and operation requirements.
• Set up and operate lathes, milling machines and grinders to shape parts to spec.
• Measure and inspect finished parts to ensure conformance to tolerances and quality standards.
• Adjust machine controls and offsets to maintain dimensions within tolerances.
• Perform in-process and final inspections per aerospace quality requirements.
• Collaborate with engineers and QA to troubleshoot and drive improvements.
• Maintain equipment and document procedures and results in compliance with ITAR.

Responsibilities

• Read blueprints and specs to determine setup requirements.
• Set up and operate lathes, mills, and grinders to shape parts.
• Measure and inspect finished parts for tolerances.
• Adjust CNC offsets and tool settings to maintain accuracy.
• Perform in-process and final quality checks for aerospace parts.
• Collaborate with engineers and QA to resolve issues.
• Maintain equipment and document procedures per ITAR policies.

Skills

Blueprint reading

Precision measurement

G/M codes knowledge

Quality inspection

Teamwork

Safety awareness

Manual dexterity

Education

High school diploma or equivalent

Vocational training / apprenticeship preferred

Tools

CNC machines

Lathes

Milling machines

Grinders

Fixture setup

Job description

Position Summary: Building upon level one, with minimal assistance, level two machinists operate 2-5 axis CNC/Automated machine cells as well as standalone machines, which requires basic machine setup including preparing and setting up fixtures and cutting tools, as well as loading and adjusting CNC programs and offsets. Level two machinist competencies include using more advanced quality inspection tools and techniques such as height, air gauge, and bench inspection. The level two machinist will have basic competencies in print reading and common CNC G and M codes. May work in one of the three areas: CNC, Turning, or Screw Machine.

Primary Duties & Responsibilities

• Be able to read and interpret blueprints, engineering drawings, and other specifications in English to determine the setup and operation requirements of machines and equipment.
• Set up and operate various machines, including lathes, milling machines, and grinders, to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
• Measure and examine completed products to ensure they meet quality standards and specifications.
• Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
• Conduct in-process inspection and final quality checks to ensure that all parts meet the rigorous standards of aerospace manufacturing, including surface finish, dimensions, and material properties.
• Collaborate with aerospace engineers and quality assurance teams to troubleshoot manufacturing issues and implement continuous improvement strategies to enhance machining processes and product quality.
• Perform routine maintenance and calibration on machining equipment to ensure optimal performance and compliance with safety standards.
• Document manufacturing processes, including machine settings, operational procedures, and inspection results, maintaining accurate records in accordance with aerospace industry regulations.
• Maintain a clean and safe work environment, adhering to company policies and safety standards.
• Maintain product quality by monitoring and adjusting CNC offsets as needed.
• Meets production demands.
• Run production on multiple machines at once. (Primary & Secondary)

Requirements

• High school diploma or equivalent; completion of vocational training or an apprenticeship in machining is preferred.
• Proven experience as a machinist or in a similar role.
• Strong understanding of machines and tools, including their designs, uses, repair, and maintenance.
• Proficiency in reading and interpreting engineering drawings and blueprints.
• Excellent manual dexterity, precision, and attention to detail.
• Familiarity with machining operations and principles, including milling, turning, and grinding.
• Ability to work independently and as part of a team, with effective communication skills.
• Willingness to adhere to safety protocols and wear protective equipment as required.
• The ability to identify and correctly load and secure fixtures with minimal assistance.
• A working knowledge of G and M codes applied in setting and adjusting offsets and interacting with CNC programs.
• A working knowledge of shop math, including tool geometry, positive and negative numbers, and basic geometry.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk, sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.

For informational purposes only, this role is eligible to participate in the Company’s Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company’s bonus multiple, based on the Company’s performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company’s 401(k) plan.