1st Shift Assembler/Finisher

Dane Manufacturing

Waunakee (WI)

Presencial

USD 22 000 - 33 000

Tempo integral

Há 2 dias
Torna-te num dos primeiros candidatos

Recebe uma resposta deste empregador

O teu currículo e carta de apresentação, adaptados exatamente ao que estão a contratar.

Ultrapassa os filtros ATS

Resumo da oferta

Dane Manufacturing seeks a diligent Assembler/Finisher to join our metal fabrication team in Wisconsin. You will assemble components, grind, deburr, and finish parts to meet specifications and quality standards, using hand tools, grinders, sanders, and finishing equipment.

You will read blueprints, inspect parts for defects, and prepare surfaces for painting or coating, while maintaining safe work habits and a clean, organized workspace. Teamwork and attention to detail are essential.

Qualificações

  • High school diploma or equivalent required.
  • 1–3 years of experience in metal fabrication or manufacturing preferred.
  • Ability to read and interpret blueprints, drawings, or work instructions.
  • Knowledge of shop safety practices and PPE requirements.

Responsabilidades

  • Assemble fabricated components according to work instructions, blueprints, or shop drawings.
  • Perform grinding, sanding, deburring, and polishing of metal parts.
  • Inspect parts for defects and ensure quality conformance.
  • Prepare surfaces for painting, coating, or further processing.
  • Measure dimensions with calipers or tape measures to verify tolerances.
  • Follow safety rules and keep work area clean.
  • Identify and report defective materials or equipment malfunctions.

Conhecimentos

Blueprint reading
Hand & power tools
Assembly techniques
Surface finishing
Quality inspection
Safety awareness
Material handling
Teamwork
Problem solving

Formação académica

High school diploma or equivalent

Ferramentas

Calipers
Tape measures
Grinders
Sanders
Riveters
Gauges

Descrição da oferta de emprego

Job SummaryThe Assembler/Finisher is responsible for assembling, grinding, deburring, and finishing fabricated metal parts to meet quality standards and customer specifications. This role requires attention to detail, knowledge of fabrication processes, and the ability to safely operate finishing tools and equipment.Key ResponsibilitiesAssemble fabricated components according to work instructions, blueprints, or shop drawings.Perform grinding, sanding, deburring, and polishing of metal parts to remove sharp edges, weld splatter, or surface imperfections.Inspect parts for defects, correct assembly, and quality conformance.Use hand tools, power tools, and finishing equipment safely and effectively.Prepare surfaces for painting, coating, or further processing.Accurately measure and verify part dimensions using calipers, tape measures, or other precision instruments.Follow all safety rules and maintain a clean, organized work area.Work with supervisors and team members to meet production goals and deadlines.Identify and report defective materials, improper assemblies, or equipment malfunctions.Perform other related duties as assigned.QualificationsHigh school diploma or equivalent required.1–3 years of experience in a metal fabrication or manufacturing environment preferred.Basic understanding of fabrication and assembly processes.Proficiency with hand tools, grinders, sanders, and finishing equipment.Ability to read and interpret blueprints, drawings, or work instructions.Strong attention to detail and commitment to quality.Ability to work independently and as part of a team.Good manual dexterity, hand-eye coordination, and physical stamina.Knowledge of shop safety practices and PPE requirements.Experience with metal finishing processes (grinding, sanding, deburring, polishing) is highly desirable.Key CompetenciesTechnical Competencies:Blueprint & Work Order Reading – Ability to interpret fabrication drawings, part numbers, and instructions.Hand & Power Tool Proficiency – Skilled in using drills, grinders, sanders, riveters, and other shop tools.Assembly Techniques – Knowledge of fasteners, adhesives, and joining methods common in metal fabrication.Surface Preparation & Finishing – Deburring, grinding, polishing, and smoothing parts to specification.Quality Inspection – Ability to measure tolerances with calipers, micrometers, and gauges to ensure conformance.Safety & Physical Competencies:Workplace Safety Awareness – Consistent use of PPE, understanding of hazard communication, and safe work practices.Material Handling – Safe lifting, moving, and staging of metal parts and components.Physical Stamina – Capability to stand, bend, and perform repetitive tasks for extended periods.Workplace Competencies:Attention to Detail – Ability to spot defects, inconsistencies, and ensure finished parts meet standards.Time Management – Efficient handling of assigned work to meet daily production schedules.Teamwork & Communication – Collaborating effectively with operators, painters, and material handlers.Adaptability – Flexibility to adjust tasks based on production demands or job priority changes.Problem-Solving & Continuous Improvement:Troubleshooting Assembly Issues – Identifying misaligned parts, surface defects, or tooling issues.Process Improvement Mindset – Suggesting better methods for assembly, finishing, and material flow.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made in accordance with the ADA.Standing/Walking: Required to stand and/or walk for 6–8 hours per shift on concrete floors.Lifting/Carrying: Frequently lifts, carries, and moves parts, tools, and materials weighing up to 35–50 lbs; occasional team lifts for heavier items.Pushing/Pulling: Uses moderate force (up to 50 lbs) to move carts, racks, or materials.Reaching/Handling: Frequent reaching, handling, and grasping of parts, hand tools, and finishing equipment.Repetitive Motions: Regular use of hands, wrists, and arms for grinding, sanding, polishing, riveting, or other repetitive assembly tasks.Bending/Kneeling: Occasional bending, stooping, squatting, and kneeling to position or assemble parts.Vision: Requires close vision and depth perception for inspecting parts and ensuring finish quality.Hearing: Ability to hear machine alarms, safety signals, and verbal instructions in a moderately noisy shop environment.Work EnvironmentNoise: Moderate to high noise levels from fabrication equipment; hearing protection required in designated areas.Temperature: Exposure to seasonal temperature fluctuations in the shop environment.Other: Exposure to sharp metal edges, oils, lubricants, and airborne metal dust; personal protective equipment (PPE) required at all times.
Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

General Labor
General Labor

Steelcraft • Town of Hartford (WI)

Presencial
USD 21 000 - 29 000
Metal Finisher - 1st Shift
Metal Finisher - 1st Shift

Mayville Engineering Company, Inc. • Wisconsin

Presencial
USD 32 000 - 42 000
Metal Finishing Associate
Metal Finishing Associate

VDL USA Holding Inc • Flowery Branch (GA)

Presencial
USD 36 000 - 48 000
Finishing Tech - Swing Shift
Finishing Tech - Swing Shift

Duravant • Walla Walla (WA)

Presencial
USD 21 000 - 34 000
Metal Finishing Associate
Metal Finishing Associate

VDL Industries Gainesville • Flowery Branch (GA)

Presencial
USD 36 000 - 48 000
Finishing Tech - Day Shift
Finishing Tech - Day Shift

Key Technology inc • Walla Walla (WA)

Presencial
USD 23 000 - 32 000
Assembly Technician
Assembly Technician

MTM Manufacturing • Indianapolis (IN)

Presencial
USD 21 000 - 30 000
Metal Finisher - 1st Shift
Metal Finisher - 1st Shift

MEC (Mayville Engineering Company, Inc.) • Town of Mayville (WI)

Presencial
USD 36 000 - 48 000
Deburr Technician- 1st shift
Deburr Technician- 1st shift

Center Industries Corporation • Wichita (KS)

Presencial
USD 26 000 - 28 000
Precision Metal Finisher: Sand, Grind & Finish
Precision Metal Finisher: Sand, Grind & Finish

MEC (Mayville Engineering Company, Inc.) • Town of Mayville (WI)

Presencial
USD 36 000 - 48 000