#1752 | Non-Destruc Test Tech 2 - 1st Shift

Embee Processing; Santa Ana (CA); On-site; USD 34,000 - 39,000; Full time

Job summary

Embee Processing in Santa Ana, CA seeks a Certified Non-Destruct Test Technician Level 2 to inspect and test parts using radiography, ultrasound, penetrant, eddy current, laser shearography, and magnetic particle methods.

Responsibilities include safety adherence, performing NDT examinations, documenting results, and assisting production with inspections. NAS 410 Level 2 certification and English fluency are required; HS diploma with 2 years of related experience preferred.

Qualifications

• Must be certified Level 2 to NAS 410 in one or more NDT methods (e.g., FPI, MPI).
• Two years of inspection-related experience preferred.
• Ability to communicate, read, and understand English; read blueprints/drawings.

Responsibilities

• Adhere to safety procedures and maintain safe work practices.
• Perform inspections and evaluations for acceptance or rejection per instructions.
• Conduct NDT examinations in conjunction with receipt and in-process inspections.
• Familiar with tools/equipment and demonstrate proficiency in their use.
• Assist production in material/component setup for receipt inspection.
• Train other individuals as required by management.

Skills

NDT Methods NAS 410

Quality Inspection

Education

High School diploma or equivalent

Tools

NDT Equipment

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

EMBEE, Santa Ana, CA, US

30+ days ago Requisition ID: 1752

Salary Range: $25.00 To $28.00 Hourly

POSITION SUMMARY:

The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including radiography, ultrasound, penetrant, eddy current, laser shearography and magnetic particle.

ESSENTIAL DUTIES & RESPONSIBILITIES:

Essential functions are the core duties or tasks that the employee will perform. List the duties that are central to performing the most basic functions of the job.

• Adherence to safety procedures/guidelines at all times.
• Maintain safety precautions at all times.
• Keep work area in a clean and orderly condition.
• Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results.
• Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication.
• Familiar with the tools and equipment and shall have demonstrated proficiency in their use.
• Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved.
• Capable of assisting production in the set-up of material and/or components for receipt inspection, as required.
• Train other individuals as required by management.

PHYSICAL DEMANDS & ABILITIES:

• Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart.
• Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds.
• May work alone with minimal supervision or with other personnel.
• Inspection personnel shall possess fundamental written and verbal communication skills.
• Inspection personnel shall be fluent (written and verbal) in the English language.
• Computer skills, especially familiarity with MS Office applications, are necessary.
• Comfortable working in fast paced team environment.

SUPPORTS:

Quality Control Manager, Shop Managers, Production Supervisors, Product Line Managers.

REQUIRED EDUCATION:

Required: High School diploma or equivalent with at least 2 years of inspection related experience.

Preferred: 2 years of inspection related experience.

MINIMUM AND PREFERRED QUALIFICATIONS:

• Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized:
  • Fluorescent Penetrant Inspection (FPI).
  • Magnetic Particle Inspection (MPI).
• Certifications MUST be current.
• Ability to communicate, read, and understand English.
• Ability to read blue prints/drawings
• Ability to follow precise instructions.
• Ability to work around hazardous chemicals.
• Must have excellent hand/eye coordination.
• Ability to work well with others as part of a team.
• Able to multi-task and open to working overtime.

Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident).

We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws.