TECHNICAL SPECIALIST - FACILITIES MECHANICAL

1100 Micron SemiAsiaOP Pte Ltd; Singapore; On-site; SGD 60,000 - 90,000; Full time

Job summary

Micron is seeking a Facilities Mechanical Technical Specialist in Singapore to coordinate maintenance and support engineering on site, working with vendors and the Facilities organization to meet department goals. You will implement AI tools to optimize maintenance, maintain documentation (SOPs, RA, PTP, EIP), and supervise outsourced services while ensuring safety and compliance.

This role requires a Diploma in Mechanical engineering and hands-on experience with MAU, AHU, FCU, pumps, and

Qualifications

• Diploma in Mechanical engineering with minimum 3 years in mechanical maintenance.
• Solid understanding of maintenance practices and procedures and installation work.
• Hands-on maintenance experience with MAU, AHU, FCU, pumps and related exhaust systems.

Responsibilities

• Ensure timely generation and closure of Work Orders for PM/CM plans.
• Liaise with vendors, review permits and track PM schedules.
• Attend troubleshooting of system abnormalities and assist/system recovery.
• Supervise outsourced service providers per defined scope and requirements.
• Maintain equipment and system maintenance records for traceability.

Skills

Maintenance planning

Vendor coordination

Root cause analysis

Troubleshooting

Documentation (SOP/Risk)

Education

Diploma in Mechanical engineering

Tools

Schematic drawings

PLC drawing analysis

Job description

Our vision is to transform how the world uses information to enrich life for all. Join an inclusive team passionate about one thing: using their expertise in the relentless pursuit of innovation for customers and partners. The solutions we build help make everything from virtual reality experiences to breakthroughs in neural networks possible. We do it all while committing to integrity, sustainability, and giving back to our communities. Because doing so can fuel the very innovation we are pursuing. As the Facilities Mechanical Technical Specialist, you coordinate with collaborators including vendors to perform maintenance and support engineering work on mechanical machinery and infrastructure on site. You receive mentorship and direction from the Facilities organization to meet the goals of the facilities department, site, facilities corporate, and company. To ensure complete compliance of Micron EHS, RBA and Safety Protocols inclusive but not limited to Code of Ethics and Conduct, Facilities Discipline, Micron Cultures, RA, SOP, PTP, EIP, etc. Implement and utilize Artificial Intelligence tools to optimize and improve the maintenance of facilities mechanical system.

Responsibilities and Tasks

Preventive Maintenance Regime

• Ensure timely generation and closure of Work Orders for PM and CM Plan.
• Liaise with vendors and acquire permits.
• Complete PM tasks.
• Retrieve relevant SOP/RA/PTP and PM checklist.
• Execute PM scheduling and Preventive and Corrective Maintenance work activities.

Progressive Replacement Regime Plan

• Communicate with vendors; review PTP and RA; raise necessary permits; implement, complete, and track the status of Progressive Maintenance Regime in tracking file.
• Check; draw; and prepare inventories for use in the regime Evaluate & enable continuous improvement for mechanical systems and Micron programs Learning Events (LE) EQCC/QCC TPM Cost savings projects Root Cause Analysis Assist system owner in root cause finding through 8D report adopting 5-Whys; verification of suspected root cause; perform corrective actions; and preventive actions, to prevent recurrence.

• Root Cause Analysis: Assist system owner in root cause finding through 8D report adopting 5-Whys; verification of suspected root cause; perform corrective actions; and preventive actions, to prevent recurrence.
• Administrate documentation in Standard Operating Procedure, Risk Assessment, Energy Isolation Procedure and Pre-Task-Plan.
• Attend troubleshooting of system abnormalities and assist or lead system recovery.
• Supervise out-sourced contract service provider to perform work activities in accordance with defined scope of work and system requirement.
• Utilize computer base software to detail and analyze records of maintenance work order, equipment history and project tracking.
• Maintain equipment and system maintenance record for work history traceability.
• Track and monitor equipment spare parts and consumable inventory.
• Provide feedback on detail build concept and specifications for the setup of new capital equipment and/or system expansion project.
• Site supervision for installation of new capital equipment and/or system expansion project at critical milestone during construction phase. Provides support for start up testing and commissioning of new equipment and system.
• Support & implement feasible SMART Facilities initiative Enforce to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, good housekeeping standard and quality policy when performing work.
• Utilize available software and tools to automate routine maintenance tasks (Filter tracking, FMS Work order assessment, etc.).

Job Requirements

• Diploma in Mechanical engineering or equivalent related field (covering 90% of mechanical Engineering Diploma course) with minimum of 3 years experience in relevant mechanical field.
• Solid understanding of maintenance practices and procedure and installation work.
• Experiences in hands on maintenance of mechanical system Make-up Air Unit (MAU); Vertical Laminar Flow fan (VLF); Recirculating Unit (RCU); Air Handling Unit (AHU); and Fan Coil Unit (FCU) Exhaust Systems (Acid Exhaust; Caustic Exhaust; Solvent Exhaust; and General Exhaust) Wet Scrubbers and Solvent Abatement Chillers Cooling Towers Pumps (Condenser Water Pumps; Chilled Water Pumps; Hot Water Pumps; Process Cooling Water Pumps) Process Vacuum Pump Water Treatment (Condenser Water with Newater and Recycled water; Chilled Water; Process Cooling Water; and Hot Water).
• Hands on experience in equipment maintenance / overhauls.
• Ability to analyze maintenance service reports or overhaul reports.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation.
• Ability to work in a team environment with various professional level.
• Ability to analyze PLC drawing / Electrical VSD will be a plus.

Working Location

Fab10N, 1 North Coast Drive, Singapore 757432

About Micron

As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and 3D XPoint™ memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and improve communication around the world. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

About Micron Technology, Inc.

We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all. With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience. To learn more, please visit micron.com/careers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

To request assistance with the application process and/or for reasonable accommodations, please contact [e-mail] Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron.

AI alert: Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification.

Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.