Research Assistant (Mechanical Engineering / Robotics / Mechatronics)

Nanyang Technological University

Singapore

On-site

SGD 42,000 - 50,000

Full time

12 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

The Schaeffler Hub for Advanced Research at NTU seeks a Research Assistant to conduct R&D in model-based haptic sensing and SLAM for soft robotics. Focus is on modelling and validating cable-driven soft robots using proprioceptive measurements and actuation data.

You will develop physics-based models, implement numerical simulations in SoRoSim and MATLAB, and validate sensing methods on motor-driven prototypes, contributing to publication-ready results.

Qualifications

  • Bachelor's degree in Mechanical Engineering, Robotics, Mechatronics, or a related field.
  • Experience in design, modelling, fabrication and validation of soft or continuum robotic systems, especially cable-driven.
  • Hands-on development of multi-actuator cable/tendon-driven robotic prototypes including mechanical design, motor integration, fabrication, calibration and testing.
  • Experience with robotics actuators, hardware configuration and coordinated control.
  • 3D printing of rigid and flexible components for soft robotics.
  • Experience integrating rigid, flexible components, actuators and transmission mechanisms into a complete prototype.
  • Experience in model-based modelling of soft robots; familiarity with SoRoSim or similar software.
  • Familiarity with proprioceptive sensing and estimation from motor-side measurements.
  • Good communication, analytical thinking, experimental design and technical documentation.

Responsibilities

  • Conduct research and develop model-based haptic sensing and state-estimation methods for soft robots.
  • Develop analytical and numerical models of deformation, cable/tendon transmission, actuator behaviour, and interaction.
  • Infer external contact forces from motor-side measurements.
  • Implement and evaluate models and estimation methods using SoRoSim, MATLAB and related tools.
  • Design, fabricate, assemble and program multi-actuator cable/tendon-driven prototypes.
  • Develop coordinated multi-actuator control and data-acquisition software for soft robotic experiments.
  • Fabricate components using Bambu Lab FDM printers and PLA/TPU materials.
  • Design and conduct experiments to validate model accuracy and robustness.
  • Analyse results, document procedures, and prepare technical reports/publications.

Skills

Prototyping
Multi-actuator control
Proprioceptive sensing
Model-based estimation

Education

Bachelor's degree in Mechanical Engineering, Robotics, Mechatronics, or related field

Tools

SoRoSim
MATLAB
3D printing

Job description

Schaeffler Hub for Advanced Research at NTUis a collaborative research center between Nanyang Technological University and Schaeffler Group. The Schaeffler SHARE program comprises a global research network with leading universities globally. The on-campus concept provides a structured approach focused on applied research in strategically important topics aligned with Schaeffler’s strategic roadmap for a fast and thorough transfer of research output into the industry. SHARE at NTU aims to expand the current state of technology and build on Robotics & Industry 4.0 as aligned with Schaeffler’s strategic roadmap.SHARE at NTU also serves as a platform in identifying and developing new talents via various collaboration initiatives with the University. For more details, please view https://www.schaeffler.sg/en/company/share-at-ntu/.

Key Job Purpose

We are seeking a Research Assistant to conduct research and development in model-based haptic sensing and haptic SLAM for soft robotic systems. The role will focus on the modelling, design and experimental implementation of cable- or tendon-driven soft robots, with particular emphasis on estimating external interaction forces and contact states from proprioceptive measurements available at the robot actuation system. The successful candidate will develop physics-based models of soft-robot deformation and cable transmission, implement numerical and simulation models using tools such as SoRoSim and MATLAB, and validate the proposed sensing and estimation methods on motor-driven soft robotic prototypes for contact-rich interaction and manipulation.

Key Responsibilities
  • Conduct research and develop model-based haptic sensing and state-estimation methods for cable- or tendon-driven soft robotic systems.
  • Develop analytical and numerical models of soft-robot deformation, cable/tendon transmission, actuator behaviour, and robot-environment interaction.
  • Develop methods to infer external contact forces and interaction states from motor-side proprioceptive measurements, including motor position, velocity, current or torque feedback, and cable/tendon actuation states.
  • Implement and evaluate soft-robot models, sensing algorithms and estimation methods using SoRoSim, MATLAB and related numerical or simulation environments.
  • Design, fabricate, assemble and program multi-actuator cable/tendon-driven soft robotic prototypes, including the soft robot body, cable-transmission mechanisms, HEBI Robotics actuators, sensors and control electronics.
  • Develop coordinated multi-actuator control and synchronized data-acquisition software for soft robotic experiments, including configuration, command and feedback handling for HEBI Robotics actuators.
  • Fabricate rigid and compliant prototype components using Bambu Lab FDM 3D printers and materials such as PLA and TPU, and integrate the printed components into soft robotic systems.
  • Design and conduct experiments to validate model accuracy, force/contact estimation performance and robustness under different robot configurations and external interaction conditions.
  • Analyse simulation and experimental results, document modelling and experimental procedures, and prepare technical reports and research publications.
Job Requirements
  • Bachelor's degree in Mechanical Engineering, Robotics, Mechatronics, or a related field.
  • Prior research or project experience in the design, modelling, fabrication and experimental validation of soft or continuum robotic systems, particularly cable-driven or tendon-driven soft robots.
  • Demonstrated hands-on experience in end-to-end development of multi-actuator cable/tendon-driven robotic prototypes, including mechanical body design, cable routing and transmission, motor integration, fabrication, assembly, calibration, control and experimental testing.
  • Demonstrated Hands-on experience with Robotics modular actuators, including hardware configuration, communication, position/velocity/torque-related command and feedback handling, and coordinated control of multiple actuators.
  • Hands-on experience using 3D printers to fabricate robotic components, including practical experience printing both rigid PLA parts and flexible TPU parts for the assembly and experimental development of soft robotic systems.
  • Experience in integrating rigid printed components, flexible TPU structures, actuators, cable/tendon transmission mechanisms and other mechanical components into a complete soft robotic prototype.
  • Experience in physics-based or model-based modelling of soft robots, including deformation, actuation, cable/tendon transmission and external interaction; familiarity with SoRoSim or equivalent soft-robot modelling and simulation software is highly desirable.
  • Familiarity with proprioceptive sensing and model-based estimation using motor-side measurements, such as position, velocity, current, torque or cable/tendon actuation information, to infer robot deformation, transmission forces or external interaction forces.
  • Familiarity with mechanics, robotics, numerical modelling, system identification and experimental validation.
  • Good written and oral communication skills, with competence in analytical thinking, research problem-solving, mechanical prototyping, experimental design and technical documentation.

We regret to inform that only shortlisted candidates will be notified.

Hiring Institution: NTU

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Research Assistant (Mechanical Engineering / Robotics / Mechatronics)
Research Assistant (Mechanical Engineering / Robotics / Mechatronics)

Nanyang Technological University, Singapore (NTU Singapore) • Singapore

On-site
SGD 39,000 - 58,000
Research Assistant (Mechanical Engineering / Robotics / Mechatronics)
Research Assistant (Mechanical Engineering / Robotics / Mechatronics)

Nanyang Technological University • Singapore

On-site
SGD 42,000 - 66,000
Research Assistant - Soft Robotics & Haptic Sensing
Research Assistant - Soft Robotics & Haptic Sensing

Nanyang Technological University • Singapore

On-site
SGD 42,000 - 50,000
Research Fellow (Mechanical Engineering / Robotics / Control Engineering)
Research Fellow (Mechanical Engineering / Robotics / Control Engineering)

Nanyang Technological University • Singapore

On-site
SGD 65,000 - 110,000
Research Assistant — Soft Robotics & Haptic Sensing
Research Assistant — Soft Robotics & Haptic Sensing

Nanyang Technological University, Singapore (NTU Singapore) • Singapore

On-site
SGD 39,000 - 58,000
Soft-Robotics Research Assistant: Haptic Sensing & SLAM
Soft-Robotics Research Assistant: Haptic Sensing & SLAM

Nanyang Technological University • Singapore

On-site
SGD 42,000 - 66,000
Research Fellow (Mechanical Engineering / Robotics / Control Engineering)
Research Fellow (Mechanical Engineering / Robotics / Control Engineering)

Nanyang Technological University • Singapore

On-site
SGD 60,000 - 120,000
Lead Research Fellow: Wearable Robotics & Biomechanics
Lead Research Fellow: Wearable Robotics & Biomechanics

Nanyang Technological University • Singapore

On-site
SGD 60,000 - 100,000
Research Fellow (Wearable Robotics and Biomechanics)
Research Fellow (Wearable Robotics and Biomechanics)

Nanyang Technological University • Singapore

On-site
SGD 60,000 - 100,000
Research Assistant (Simulation & BioMEMS)
Research Assistant (Simulation & BioMEMS)

Nanyang Technological University • Singapore

On-site
SGD 42,000 - 64,000