R&D Application Developer

Keysight Technologies

Singapore

On-site

SGD 120,000 - 150,000

Full time

32 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Keysight Technologies is seeking an experienced RF/microwave engineer to join Keysight EDA in Singapore. The role focuses on hands-on RF hardware design combined with electromagnetic simulation and design automation, delivering practical RF/workfow solutions for customers.

The successful candidate will craft, validate, and demonstrate application-level workflows using ADS, RFPro, and Pythonautomation. Opportunities span board- and module-level RF design with potential expansion into RFIC/MMIC

Qualifications

  • Bachelor’s or Master’s degree in Electrical Engineering, RF/Microwave Engineering, or related field, or equivalent experience.
  • Hands-on RF/microwave hardware design experience at board/module level.
  • Experience with RF components (PAs, matching networks, filters, antennas, transceivers) and RF systems.
  • Experience with ADS or comparable RF/microwave EDA tools for schematic, simulation, tuning, optimization, analysis.
  • Experience with electromagnetic simulation tools (RFPro, Momentum, HFSS, CST).
  • Understanding of S-parameters, impedance matching, stability, linearity, output power, noise, substrate effects.
  • Ability to translate schematics to manufacturable PCB/module layouts (Altium).
  • Proficiency in Python, MATLAB, or scripting for automation, data analysis, visualization.

Responsibilities

  • Develop and validate RF/microwave application workflows and automation scripts using ADS, RFPro, or comparable tools.
  • Translate customer design challenges into reusable examples, templates, and guidance.
  • Create and validate simulation flows for RF circuit design, EM analysis, co-simulation, and design-space exploration.
  • Apply knowledge of PAs, matching networks, filters, antennas, and RF interconnects to workflows.
  • Investigate parasitic effects and develop workflows to mitigate performance degradation.
  • Develop Python-based utilities to automate simulation setup, sweeps, data processing, visualization, and reporting.
  • Collaborate with product management, R&D, and field teams to define requirements and demonstrate capabilities.
  • Document workflows and best practices for engineers and customers.
  • Contribute to AI-assisted engineering prototypes and validate AI-generated results.

Skills

RF/microwave hardware design
S-parameters & impedance matching
Python automation
EM simulation
Cross-functional collaboration

Education

Bachelor’s or Master’s in Electrical Engineering or RF/Microwave

Tools

ADS
RFPro
Momentum
HFSS
CST Studio Suite
Altium Designer
Git

Job description

Overview

Keysight is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~16,800 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do.

Our award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions.We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers.

Keysight EDA is a global leader in electronic design automation, providing advanced software solutions that help engineers design, simulate, validate, and optimize next-generation RF, microwave, high-speed digital, semiconductor, and communications systems. Our EDA organization combines deep domain expertise, commercial software development, application engineering, and customer collaboration to solve complex design challenges across circuit, electromagnetic, and workflow-driven design environments.

Responsibilities

We are looking for an experienced RF/microwave engineer to join Keysight EDA as an R&D Application Developer in Singapore. This role is suited to an engineer who combines hands-on RF hardware design and electromagnetic simulation experience with an interest in creating practical design automation and productivity solutions. The successful candidate will help develop, validate, and demonstrate application-level workflows using ADS, RFPro, EM simulation tools, and Python-based automation. The role will initially emphasize board- and module-level RF design while providing opportunities to expand into RFIC/MMIC, packaging, and AI-assisted engineering workflows.

  • Develop and validate RF/microwave application workflows, examples, reference designs, and automation scripts using ADS, RFPro, or comparable EDA tools.
  • Translate real customer design challenges into reusable application examples, templates, design guidance, and productivity solutions.
  • Create and validate simulation flows for RF circuit design, electromagnetic analysis, EM/circuit co-simulation, optimization, and design-space exploration.
  • Apply practical knowledge of power amplifiers, matching networks, filters, antennas, transmission structures, and RF interconnects to application development.
  • Investigate layout- and substrate-related parasitic effects and develop workflows that help engineers identify, model, and mitigate performance degradation.
  • Develop Python-based utilities that automate simulation setup, parameter sweeps, data processing, visualization, comparison, and reporting.
  • Partner with product management, R&D, and field application teams to define requirements, evaluate usability, reproduce customer problems, and demonstrate new capabilities.
  • Document workflows, examples, and best practices for application engineers, software developers, and customers.
  • Contribute domain expertise to AI-assisted and agentic engineering prototypes, including the validation of AI-generated workflows and simulation results.
Qualifications
Required Qualifications
  • Bachelor's or Master's degree in Electrical Engineering, RF/Microwave Engineering, or a related technical field, or equivalent relevant industry experience.
  • Substantial hands-on RF/microwave hardware design experience at the board, module, or subsystem level.
  • Practical experience designing one or more of the following: power amplifiers, matching networks, filters, antennas, transceivers, or military/communications radio hardware.
  • Experience with ADS or a comparable RF/microwave EDA environment for schematic design, simulation, tuning, optimization, and results analysis.
  • Experience with electromagnetic simulation tools such as RFPro, Momentum, HFSS, CST Studio Suite, or equivalent.
  • Solid understanding of S-parameters, impedance matching, stability, linearity, output power, efficiency, noise, substrate stackups, meshing, and parasitic effects.
  • Experience translating a schematic design into a manufacturable PCB or module layout using tools such as Altium Designer or comparable PCB platforms.
  • Working proficiency with Python, MATLAB, or another scripting language for engineering automation, data analysis, or visualization, with the ability and motivation to deepen Python capability.
  • Ability to troubleshoot complex engineering workflows, compare simulation results, assess model fidelity, and communicate technical findings clearly.
  • Ability to collaborate across RF engineering, software development, product management, and customer-facing teams.
Preferred Qualifications
  • Experience developing reusable engineering scripts, APIs, test utilities, or application examples rather than only operating design tools manually.
  • Experience correlating circuit, EM, layout, and measurement results and explaining differences in a technically rigorous way.
  • Exposure to RFIC/MMIC, package, module, or advanced interconnect design workflows.
  • Familiarity with PDK-based design, parameterized cells, DRC/LVS concepts, and schematic-layout verification; deep IC layout experience is not required.
  • Experience with Git, code review, unit or regression testing, technical documentation, and maintainable software development practices.
  • Familiarity with AI-assisted engineering tools, LLM-based copilots, prompt design, tool calling, Model Context Protocol (MCP), or comparable agent integration approaches.
  • Experience working directly with customers or field engineers to diagnose design issues and convert learnings into scalable product or workflow improvements.
  • Experience mentoring engineers or coordinating technical development across a small multidisciplinary team.
What Success Looks Like
  • Within the first six months, deliver validated RF/EM application examples and at least one reusable automation utility that addresses a meaningful customer workflow.
  • Build credibility with RF domain experts by producing technically accurate results, documenting assumptions, and validating simulation outputs.
  • Expand from board- and module-level RF expertise into adjacent RFIC/MMIC, packaging, and agentic workflow use cases with support from Keysight specialists.
  • Convert recurring customer and application-engineering problems into clear requirements and reusable solutions that improve productivity in Keysight EDA tools.
Role Positioning

This position remains an R&D application-development role rather than a pure field application or RF design position. The successful candidate is expected to combine RF domain depth with growing software-development capability. Strong practical RF and EM expertise is essential; prior mastery of every IC-layout and agentic-AI technology is not required at entry, provided the candidate can demonstrate the ability to learn, implement, validate, and document new workflows.

Careers Privacy Statement***Keysight is an Equal Opportunity Employer.***

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

R&D Application Developer
R&D Application Developer

Keysight Technologies Singapore (Sales) Pte. Ltd....- • Singapore

On-site
SGD 90,000 - 140,000
RF/EM Application Engineer — Automation & AI Workflows
RF/EM Application Engineer — Automation & AI Workflows

Keysight Technologies • Singapore

On-site
SGD 120,000 - 150,000
RF/Microwave R&D Application Engineer
RF/Microwave R&D Application Engineer

Keysight Technologies Singapore (Sales) Pte. Ltd....- • Singapore

On-site
SGD 90,000 - 140,000
Senior RF Simulation Software Engineer
Senior RF Simulation Software Engineer

KEYSIGHT TECHNOLOGIES SINGAPORE (SALES) PTE. LTD. • Singapore

On-site
SGD 120,000 - 180,000
RF Simulation Software Engineer
RF Simulation Software Engineer

KEYSIGHT TECHNOLOGIES SINGAPORE (SALES) PTE. LTD. • Singapore

On-site
SGD 90,000 - 130,000
RF Engineer
RF Engineer

Applied Materials, Inc. • Singapore

On-site
SGD 90,000 - 130,000
RF Engineer
RF Engineer

FILPAL (S) PTE. LTD. • Singapore

On-site
SGD 70,000 - 90,000
Senior R&D Software Development Engineer
Senior R&D Software Development Engineer

Keysight Technologies • Singapore

On-site
SGD 90,000 - 130,000
Schematic & PCB Design Engineer
Schematic & PCB Design Engineer

Keysight Technologies • Singapore

On-site
SGD 42,000 - 56,000
FIELD APPLICATION MANAGER (RF Test & Measurement)
FIELD APPLICATION MANAGER (RF Test & Measurement)

GI HR SERVICES PTE. LTD. • Singapore

On-site
SGD 110,000 - 170,000