Automation Engineer, Powertrain

Lucid Motors; Saudi Arabia; On-site; SAR 260,000 - 420,000; Full time

Job summary

Lucid Motors, Saudi Arabia, seeks a hands-on PLC/Automation Engineer to develop, commission, sustain and improve PLC, HMI/SCADA, and MES/APM interfaces for AMP-2 Drive Unit and HV Battery assembly.

You will own FAT/SAT activities, drive equipment acceptance, provide robust troubleshooting, and collaborate with cross-functional teams to ensure smooth production ramp and Safe Launch in a dynamic automotive environment.

Qualifications

• Bachelor's degree in Electrical, Controls, Automation, Mechatronics Engineering or closely related discipline.
• 3+ years hands-on PLC-based discrete automation experience.
• Demonstrated PLC/HMI development plus equipment commissioning, FAT/SAT, launch or high-volume ramp experience.
• Ability to troubleshoot schematics, I/O, networks, panels, safety circuits, and complex controls failures using structured RCA.
• Fluent professional in English.

Responsibilities

• Develop, commission, sustain and improve PLC, HMI/SCADA/Ignition, and industrial networks across AMP-2 Drive Unit and HV Battery assembly.
• Launch FAT/SAT and equipment acceptance, oversee punch-list closure and final handover of as-built code and documentation.
• Design and optimize HMI/SCADA screens, alarms, diagnostics, and historian tags to reduce MTTR.
• Integrate PLCs with MES/APM/LMIS using OPC-UA; validate machine states, counts, rejects and traceability end to end.
• Ensure OT cybersecurity, safety compliance and recovery testing; support HV & safety system changes.

Skills

Siemens TIA Portal

Rockwell Studio 5000

HMI/SCADA/Ignition

Industrial networks

Vision systems (Cognex/Keyence)

Robotics interfaces

Motion control

Safety PLCs

English fluency

Education

Bachelor's degree in Electrical/Controls/Automation/Mechatronics

Tools

FANUC Robots

Cognex Vision

OPC-UA

Job description

At Lucid, we are creating exceptional mobility experiences through innovation to drive the world forward. Built on Lucid’s proprietary technology and software-defined vehicle architecture, our award-winning vehicles bring our “Compromise Nothing™” approach to the global automotive market. That means refusing to choose between performance and sustainability, design and engineering, ambition and integrity. In Lucid Air and Lucid Gravity, we have designed and built vehicles that have redefined their segments, combining exceptional range, performance, design, and expansive space in a single experience.

We achieve this through deep vertical integration, with design, engineering, and productionhappening in-houseacross our global offices andmanufacturingfacilities.Ourteamscomefromindustriesaround the world, united by a shared commitment to excellence.By refusing to settle, youcanhelpredefinewhat’spossible andshape the future of mobility.

Hands-on technical contributor responsible for developing, commissioning, sustaining, and improving PLC, HMI/SCADA/Ignition, industrial networks, vision, robotics interfaces, motion control, and MES/APM integration across AMP-2 Drive Unit and HV Battery assembly. Supports equipment acceptance from FAT/SAT through Safe Launch, volume ramp, and stable production in compliance with Lucid controls and production system, functional-safety, OT cybersecurity, and change-control standards. Accountable for controls reliability, traceability, fault recovery, uptime, and capability transfer to Saudi engineers and technicians.

Key Responsibilities:

• PLC Programming, Standards & Change Governance
  • Develop, test, and sustain PLC programs, function blocks/AOIs, data structures, and interfaces for DU and HV Battery equipment using approved coding, tag, alarm, diagnostic, and documentation standards.
  • Control all software changes through backup, impact/risk assessment, peer review, approval, validation, revision history, rollback readiness, and post-change archive.
  • Troubleshoot PLC, I/O, sequencing, interlock, electrical, network, and safety-circuit faults; complete RCA, permanent corrective action, and current backups/drawings/change records.
• Launch, FAT/SAT & Equipment Acceptance
  • Execute controls FAT/SAT covering I/O, sequence logic, permissive, interlocks, alarms, recovery/restart, safety functions, cycle performance, and data interfaces; review supplier controls deliverables against AMP-2 specifications.
  • Own assigned controls punch-list closure, supplier retest, acceptance evidence, production-release support, and final handover of as-built code, parameters, licenses, backups, drawings, manuals, and training records.
• Develop HMI/SCADA screens, alarms, events, diagnostics, equipment states, recovery guidance, and historian tags that improve troubleshooting and MTTR.
• Integrate PLCs with MES/APM/LMIS using approved tags, OPC-UA, handshakes, and messaging; validate machine states, counts, rejects, quality results, downtime, serial transactions, genealogy, and traceability end to end.
• Resolve interface and data-quality issues with Manufacturing, Quality, IT/OT, MES, and suppliers; maintain reusable integration templates and accurate station data.
• Networks, OT Cybersecurity & Recovery
  • Configure and troubleshoot EtherNet/IP, managed switches, addressing, and field-device communications.
  • Follow OT cybersecurity, approved software/firmware, role-based access, secure backups, segmentation, accounts, incident escalation, and controls recovery testing.
• Vision, Robotics, Motion & Powertrain Interfaces
  • Deploy and troubleshoot vision systems like Cognex, Keyence or equivalent vision for inspection, orientation, label verification, error-proofing, and traceability; support FANUC Robots cells at PLC/I/O, handshake, safety, recovery, and cycle level.
  • Commission and troubleshoot VFDs, servos, encoders, positioning/homing, actuators, and controls interfaces for fastening, pressing, leak test, dispensing, marking, barcode/RFID, electrical test, material handling, conveyors, and part marriage.
• Safety, HV & Compliance
  • Support safety PLC changes and validation under ISO 13849/IEC 62061 governance; comply with SASO, applicable Saudi labor requirements, IEC 60204, machine/stored-energy LOTO, electrical safe work, HV LOTO/HVIL, and PPE.
• Production Support, Reliability & Launch Governance
  • Provide controls support from commissioning through sustaining production; analyze downtime, repeat stops, nuisance alarms, cycle loss, communication faults, and recovery delay, then verify permanent countermeasures.
  • Contribute to PM/CBM tasks, critical spares, backup strategy, and obsolescence planning; support Safe Launch, run-at-rate, capacity verification, readiness reviews, LPA/Process Confirmation, and QRQC/RCCA closure.
• Saudization, Capability Transfer & Collaboration
  • Deliver structured OJT, practical assessment, competency progression, training material, troubleshooting guides, matrices, and training plans for Saudi engineers/technicians.
  • Collaborate with Production, Maintenance, Manufacturing Engineering, Quality, EHS, IT/OT, MES, suppliers, and global technical teams.

Skills:

• Hands-on expertise in Siemens TIA Portal and Rockwell Studio 5000; capable of supporting mixed-platform environments and associated safety PLCs.
• HMI/SCADA/Ignition, alarms, historian, diagnostics, FAT/SAT, I/O checkout, startup, punch-list closure, and production handover.
• Industrial-network troubleshooting: Profinet, EtherNet/IP, Modbus TCP, OPC-UA, PLC/MES integration, and OT cybersecurity discipline.
• Ability to interpret electrical/I/O/network drawings, control panels, and safety circuits; strong structured RCA, documentation, and countermeasure verification.
• Self-directed execution across commissioning and production support; effective communication in multicultural and bilingual English/Arabic environments.

Minimum Qualifications:

• Bachelor's degree in Electrical, Controls, Automation, Mechatronics Engineering, or closely related discipline.
• 3+ years of hands-on PLC-based discrete automation
• Demonstrated PLC/HMI development plus equipment commissioning, FAT/SAT, launch, or high-volume ramp experience.
• Ability to troubleshoot schematics, I/O, networks, panels, safety circuits, and complex controls failures using structured RCA.
• Fluent professional in English
• Able to work safely around automated equipment, robots, electrical systems, and HV processes within assigned authorization.
• Functional safety, greenfield launch, Safe Launch/run-at-rate, high-volume ramp, and structured engineer/technician capability development.

Preferred Qualifications

• Automotive experience, EV, battery, powertrain, or comparable advanced manufacturing.
• Experience in Powertrain equipment exposure including fastening, pressing, leak test, dispensing, marking, electrical test, and material handling.
• Arabic language strongly preferred.

Compensation & Benefits:

Lucid offers a comprehensive and competitive benefits package including medical, dental, and vision insurance; life and disability coverage; paid time off; paid holidays, paid sick leave; and a401(k) retirementplan. Hourly/non-exempt employees accrue up to 120 hours paid time off, and salaried/exempt employee accrue up to 160 hours paid time off.Eligible employees may also participate in Lucid’s equity program and/or a discretionary annual cash incentive program. Incentive and equity awards, if applicable, are determined based on individual performance, role scope, market considerations, and overall company results, in accordance with the terms of the applicable plans.

Equal Opportunity: At Lucid, we believe diversity strengthens everything we build. Lucid Motors is proud to be an equal opportunity employer and is committed to providing an inclusive workplace for all. We consider all qualified applicants without regard to race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity or expression, marital status, or any other characteristic protected by applicable state or federal laws and regulations.

Accessibility: Lucid Motors is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need anyaccommodation toparticipatein the application process, please contact us atTA-Operations <@> lucidmotors.com . This email address is designated solely for accommodation requests and is not monitored for job applications or resume submissions. To be considered for employment, all applications must be submitted through the Lucid Motors Careers website.

Candidate Data Privacy: Bysubmittingyour application, you understand and agree that your personal data will be processedin accordance withour Candidate Privacy Notice .

To all recruitment agencies: Lucid Motors does not accept agency resumes. Please do not forward resumes to Lucid Motors. Lucid Motors is not responsible for any fees related to unsolicited resumes.