Land Surveyor – Shoring and Earthworks
Job Purpose
The Surveyor is responsible for carrying out all surveying and setting-out activities related to shoring, excavation, earthworks, and foundation projects. The role ensures that all construction activities are executed in accordance with approved drawings, project specifications, coordinates, levels, and tolerances.
The Surveyor shall provide accurate survey data, monitor excavation and shoring works, and coordinate with the construction, engineering, and QA/QC teams to ensure compliance with project requirements.
Key Responsibilities and Duties
A. Surveying and Setting-Out Works
- Review approved construction drawings, IFC drawings, and survey data before commencing site activities.
- Establish and maintain site control points, benchmarks, and reference coordinates.
- Carry out setting-out for excavation boundaries, shoring alignments, pile locations, guide walls, and foundation works.
- Set out coordinates and levels for secant piles, contiguous piles, soldier piles, sheet piles, and diaphragm walls.
- Verify offsets, alignment, verticality references, and excavation limits.
- Conduct level surveys for working platforms, formation levels, and foundation levels.
B. Shoring Works
- Set out the location and coordinates of shoring piles and retaining structures.
- Verify pile center points, spacing, alignment, and reference levels.
- Monitor excavation levels at different stages of shoring construction.
- Carry out surveys for waler beams, struts, tiebacks, anchors, and bracing systems.
- Check the positioning and levels of temporary and permanent retaining structures.
- Assist engineers in monitoring potential movement or deformation of shoring systems.
- Maintain accurate survey records for shoring installation and excavation stages.
C. Earthwork and Excavation Works
- Conduct topographical surveys before excavation activities.
- Establish excavation boundaries, grid lines, and reference levels.
- Set out excavation limits, slopes, benches, and temporary access ramps.
- Monitor excavation progress and verify required formation levels.
- Carry out existing ground and post-excavation surveys.
- Calculate excavation and backfilling quantities using survey data.
- Perform stockpile surveys and calculate material quantities.
- Verify backfilling levels, compaction layers, and final grading levels.
- Prepare cut-and-fill calculations and volume reports.
D. Monitoring and Quality Control
- Verify that all survey activities comply with approved drawings and project specifications.
- Conduct as-built surveys for completed shoring and earthwork activities.
- Check survey equipment calibration and ensure instruments are in good working condition.
- Coordinate with QA/QC engineers for inspection requests (IR/WIR).
- Identify and report discrepancies between actual site conditions and approved drawings.
- Maintain survey records, field notes, and inspection reports.
- Support QA/QC documentation and preparation of handover records.
E. Instrumentation and Monitoring Support
- Assist the instrumentation team in establishing monitoring points.
- Survey settlement markers, monitoring prisms, and reference benchmarks.
- Carry out periodic level and coordinate checks as instructed by the project engineer.
- Record monitoring readings and report unusual movements or deviations immediately.
- Support monitoring surveys for adjacent buildings, roads, utilities, and existing structures.
F. Coordination and Reporting
- Coordinate daily with the Site Engineer, Construction Manager, and Survey Manager.
- Provide setting-out information to site supervisors and subcontractors.
- Prepare daily survey reports and progress records.
- Maintain updated survey drawings and as-built records.
- Report any discrepancies, obstructions, or site conditions affecting construction activities.
- Ensure survey activities are properly coordinated with excavation and shoring sequences.
5. Technical Skills and Software
The candidate should have practical experience with:
- Total Station (Leica, Topcon, Sokkia, or Trimble).
- Auto Level and Digital Level.
- GPS/GNSS Survey Equipment.
- Survey data processing and coordinate calculations.
- As-built drawings and survey reporting.
- Understanding of excavation and shoring drawings.