Computer Systems Architect (ARM-Based SBC)

Nextbridge Global

Lahore

Vor Ort

PKR 2.009.000 - 3.125.000

Vollzeit

14 Tage+

Eine vollständige Bewerbung in einer Minute

Maßgeschneiderter Lebenslauf und Anschreiben – versandbereit.

Schaffe es an den ATS-Filtern vorbei

Zusammenfassung

Nextbridge Global is seeking an experienced Computer/Electrical Engineer to design and validate an ARM-based SBC system architecture, focusing on hardware-software integration.

The role requires hands-on work with ARM processors, memory interfaces, and peripheral integration, including USB, PCIe, Ethernet, and CAN, in a Linux-based environment. You will define block diagrams, select components, and ensure robust BSPs.

Qualifikationen

  • Bachelor's or Master's degree in Electrical or Computer Engineering.
  • Strong experience in computer architecture and ARM application-processor-based digital system design.
  • Knowledge of SoC architecture, peripheral controllers, pin multiplexing, and processor datasheets.
  • Experience with DDR-family/LPDDR memory integration, storage interfaces, power management.
  • Strong understanding of USB, PCIe, CAN and Ethernet interfaces.
  • Experience with embedded Linux, U-Boot, device trees, and BSPs.

Aufgaben

  • Define the overall system architecture, hardware block diagrams, and interconnection strategy for an ARM-based SBC.
  • Evaluate and select ARM application processors/SoCs based on performance, peripheral availability, power consumption, and software support.
  • Define peripheral allocation and pin mapping for I2C, SPI, UART, GPIO, USB, PCIe, Ethernet, and other interfaces.
  • Design memory and storage architecture including DDR/LPDDR RAM, eMMC, SPI flash, and NVMe where applicable.
  • Define integration requirements for sensors, RTCs, clock sources, PMICs, networking components, and expansion modules.
  • Perform pre-design feasibility analysis to verify SoC, memory, peripheral, and external device compatibility.

Kenntnisse

ARM architecture
System design
SoC interconnects
DDR/LPDDR memory
Embedded Linux
U-Boot
Device trees
Pin multiplexing
USB/PCIe/Ethernet/CAN

Ausbildung

Bachelor's or Master's degree in Electrical or Computer Engineering

Tools

U-Boot
Device Tree tooling
Embedded Linux tooling

Jobbeschreibung

Job Overview

We are seeking an experienced Computer/Electrical Engineer to design and validate the system architecture of a custom ARM-based Single-Board Computer (SBC). The ideal candidate will have hands‑on experience with ARM application processors, peripheral integration, memory architecture, and hardware-software integration.

Key Responsibilities
  • Define the overall system architecture, hardware block diagrams, and component interconnection strategy for an ARMbased SBC.
  • Evaluate and select suitable ARM application processors/SoCs based on performance, peripheral availability, power consumption, and software support.
  • Define peripheral allocation and pin mapping, determining how external components connect to the processor through I²C, SPI, UART, GPIO, USB, PCIe, Ethernet, and other interfaces.
  • Design the memory and storage architecture, including DDR/LPDDR RAM, eMMC, SPI flash, and NVMe where applicable.
  • Define integration requirements for sensors, RTCs, clock sources, PMICs, networking components, and expansion modules.
  • Perform pre-design feasibility analysis to verify SoC, memory, peripheral, and external device compatibility, including interface, and software support.
Required Qualifications
  • Bachelor's or Master's degree in Electrical, or Computer Engineering.
  • Strong experience in computer architecture and ARM application-processor-based digital system design.
  • Knowledge of SoC architecture, peripheral controllers, pin multiplexing, and processor datasheets.
  • Experience with DDR-family/LPDDR memory integration, storage interfaces, power management, clocking, and boot architecture.
  • Strong understanding of communication interfaces, including USB, PCIe, CAN and Ethernet.
  • Experienced with embedded Linux, U-Boot, device trees, and Board Support Packages (BSPs).
Preferred Experience
  • Previous development of custom ARM-based SBCs, Linux computing platforms, or industrial embedded computers.
  • Experience with NXP i.MX, Rockchip, TI Sitara, or similar application processors.
Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

ARM SBC Architect: Hardware-Software System Designer
ARM SBC Architect: Hardware-Software System Designer

Nextbridge Global • Lahore

Vor Ort
PKR 2.009.000 - 3.125.000
Design Verification Engineer
Design Verification Engineer

Leading Edge • Islamabad

Vor Ort
PKR 1.200.000 - 1.800.000
Senior Hardware Designer
Senior Hardware Designer

Embeddeddesigner • Karachi Division

Vor Ort
PKR 892.800 - 1.674.000
Paid Time Off
Flexible Work Hours
Senior Design Verification Engineer for SoCs (Arm/RISC-V)
Senior Design Verification Engineer for SoCs (Arm/RISC-V)

Leading Edge • Islamabad

Vor Ort
PKR 1.200.000 - 1.800.000
Junior Hardware Designer
Junior Hardware Designer

Embeddeddesigner • Gulistan-e-Jauhar

Vor Ort
PKR 446.400 - 669.600
Paid Time Off
Flexible Work Hours
Embedded Systems Engineer
Embedded Systems Engineer

Nextbridge • Lahore

Vor Ort
PKR 1.200.000 - 2.400.000
Technical Project Manager – Embedded Systems
Technical Project Manager – Embedded Systems

Embeddeddesigner • Karachi Division

Vor Ort
PKR 13.935.340 - 22.296.544
Paid Time Off
Flexible Work Hours
Electronics Hardware Engineer (Embedded & PCB Design)
Electronics Hardware Engineer (Embedded & PCB Design)

Funavry • Islamabad

Hybrid
PKR 1.200.000 - 1.800.000
Competitive salary bonuses
Hybrid and remote-friendly working
Annual learning budget
+3
Hardware Verification Engineer
Hardware Verification Engineer

Leading Edge • Islamabad

Vor Ort
PKR 60.000 - 90.000
senior engineer
senior engineer

Qualcomm Technologies, Inc • Hyderabad City Taluka

Vor Ort
PKR 1.800.000 - 3.000.000
Top-Standorte