Technician – Failure Analysis

Aitomic Jobs; Malaysia; Hybrid; MYR 42,000 - 64,000; Full time

Job summary

Bosch Group in Bayan Lepas, Pulau Pinang, Malaysia is seeking a Technician – Failure Analysis to work on first-level failure analyses, support process capability studies, and drive improvements across production lines. The role requires collaboration with VSO/VSE and Supervisors to ensure safety, quality, cost, and delivery targets with guidance from a Technician 3.

The candidate will perform process studies, assist in changeover activities, and contribute to technical reports and QA

Qualifications

• Minimum Diploma in Engineering Field or Sijil Kemahiran Malaysia Level 4 or equivalent.
• Experience working in manufacturing is an advantage.
• Able to read and interpret technical drawings and perform data analysis.
• Strong communication and problem-solving abilities.

Responsibilities

• Perform process studies for failure analysis on existing products and assist time/cycle studies.
• Support machine and process capability studies during NPI and mass production with guidance from senior technician.
• Assist in ISIR sample build/test coordination and related reports.
• Maintain documentation such as PQI visuals, WI, 7S photos, QA alerts, and quality presentations.

Skills

Multitasking

English language

Bahasa Malaysia

Technical report writing

Problem solving

Education

Diploma in Engineering or Sijil Kemahiran Malaysia Level 4

Tools

Microsoft Office

SPC (Statistical Process Control)

GD&T (Geometric Dimensioning & Tolerancing)

Process Capability Studies

Job description

Short Summary

Technician – Failure Analysis with Bosch Group. 1.Role 1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3. 1.2 Responsible for 1st level failure analysis of reject tools or components from production line to identify process or supplier related…

Key Details

• Position / opportunity: Technician – Failure Analysis
• Organization: Bosch Group
• Country / coverage: Malaysia
• Location: Bayan Lepas, Pulau Pinang, Malaysia
• Work arrangement: On-site
• Opportunity type: Jobs
• Sector: Education
• Compensation: Not specified
• Duration: Not specified
• Start date: 2026-08-17
• Application deadline: Not specified

Description

1.Role 1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3. 1.2 Responsible for 1st level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by shopfloor leaders. 1.3 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production with guidance from Senior Technician. 2.Job Scope 2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production. 2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities. 2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor. 2.4 To assist Manufacturing Engineering document: Visual aids PQI, work instructions WI, 7S photo, Inspector Work Sequence, Quality Alert & Quality awareness presentation material for briefing purpose. 2.5 To perform daily complaint of raw material to PUQ and assist in scrap preparation if necessary. 2.6 To train and monitor repairers on daily rework activities. 2.7 To support Production in achieving the effectiveness/productivity, output, FOR and quality target. 2.8 To support and involve in BPS activities such as Point CIP projects, LLD, Change Over, TPM or process/product improvement. 2.9 To participate in all scraping audits, coordinate in providing and implementing corrective actions. 2.10 To prepare & submit the scrap form which need submitted daily scrap for management approval. 2.12 Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and process meet the capability requirement during new product introduction and mass production. 2.13 Support VSE/FPV in coordination of PDP project sample build (Pre-Pilot and Pilot run) on material availability and jig and fixtures readiness. 2.14To assist the Process Engineer / Supervisor in the day-to-day operation. 2.15To support an acting as supervisor if Supervisor & LO no turn up. 2.16To carry out any other duties assigned by immediate superior time to time. 3.Core Competencies 3.1 Multi-tasking skills. 3.2 Able to communicate orally and written in English and Bahasa Malaysian. 3.3 Good attitude, Openness, receptive to feedback and suggestion. 3.4 Credible, reliability and trustworthy. 3.5 Sense of urgency. 3.6 Basic knowledge of BPS Principles and Value Stream Q-Basics. 3.7 Good in technical report writing and include complete data analysis and action recommendation. 3.8 Experience in manufacturing activities and documentation (eg: Work Instruction, Control Plan, Process FMEA, Machine and Process Capability Studies, Statistical Process Control – SPC, Time Study (VT), Line Balancing, Setup Plan). 3.9Able to understand and interpret technical drawing. 3.10Hands on experience on failure analysis and problem-solving methodology. 4.Formal Education 4.1 Minimum Diploma in Engineering Field or Sijil Kemahiran Malaysia Level 4 or any equivalent. 5.Knowledge and Exposure 5.1 Experience working in manufacturing will be an advantage. 6.Knowledge, Skills and Ability 6.1 Able to understand, read and communicate in Malay and English. 6.2 Able to work under minimum supervision. 6.4 Able to use Microsoft Office. 6.5 Good communication skills and problem-solving ability. 6.6 Effective communication with value stream management and value stream engineer. 6.7 Knowledge of ISO, TS, IEC/EN Standard, Product safety requirement e.g.UL, CSA is an added advantage. 6.8 Knowledge of 7QC tools and Geometric, Dimension and Tolerancing (G, D&T) is an added advantage. 6.9 Familiar with statistical process control methods, measurement system analysis and cycle time study is an added advantage. Ability to manage personnel time to ensure the success of completion of assignments. Ability to perform multitasking according to priority & keep…

Responsibilities

• 1.Role 1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3.
• 1.2 Responsible for 1st level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by shopfloor leaders.
• 1.3 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production with guidance from Senior Technician.
• 2.Job Scope 2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production.
• 2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities.
• 2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor.

Requirements / Eligibility

• during new product introduction and mass production with guidance from Senior Technician.
• 2.Job Scope 2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production.
• 2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities.
• 2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor.
• 2.4 To assist Manufacturing Engineering document: Visual aids PQI, work instructions WI, 7S photo, Inspector Work Sequence, Quality Alert & Quality awareness presentation material for briefing purpose.