Get a reply from this employer
Your resume and cover letter, tailored to exactly what they’re hiring for.
Robert Bosch Power Tools Sdn Bhd in Penang is seeking a Quality Engineer to ensure product and process quality across the value stream. You will support VSM quality performance, manage change control, and drive 8D/CAPA for customer issues.
You will contribute to new product introduction, ISIR release, PFMEA, CP, and reliability testing while maintaining ISO 9001/TS16949 standards. Fluent English and Bahasa Malaysia are required, with at least 2 years in manufacturing.
Responsible for new product quality requirement.
Ensure products manufactured meet product & process quality requirements.
Customer complaint resolution and product warranty improvement.
Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
Ensure closed loop of internal and external audit finding include product safety audit.
Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
Responsible for process improvement project and update Management on the improvement result.
Responsible for Quality problem resolution through problem solving process PSS/8D.
Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
Monitor, report of KPI’s in timely manner and establish action plan.
Any other tasks or responsibilities assigned by superior.
Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
New project product qualification test include fulfill the regulation requirement.
Actively involves in FEP, QG, FMEA, CP and production line release.
Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
Provide training to QMM test technician on all the related inspection plan and checklist.
Work with service center to understand the product quality level in the market.
Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
Responsible for part release and incoming inspection plan.
Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
To ensure measurement methodology alignment between PgP2 and supplier.
To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.
Lead Q-VSM process and ensure fulfillment during pilot stage.
Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
Support cost saving, 2nd / alternatives source activities and approve alteration change.
Regular review with production personnel for CP and FMEA.
Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
Ensure ANDI contents is checked before release and implemented correctly.
Conduct periodic audits to ensure line and process compliances.
Conduct Failure Investigation with cross-functional team for non conformance incidents.
Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
Responsible for plant to plant quality complaint management.
Responsible for product transfer on quality measures between plant.
Responsible for monthly Quality meeting, warranty analysis reporting.
Bachelor Degree or equivalent in Mechanical / Electrical & Electronics Engineering or Science.
Proficiency in spoken and written English and Bahasa Malaysia.
Minimum of 2 years experience in a manufacturing environment (Engineering, quality or project management).
Good in technical report writing and include complete data analysis and action recommendation.
Experience in Plastic molding, metal stamping, turn part, PCBA, die-cast, hardening part is required.
Knowledge in software coding will added the advantages Knowledge of ISO 9001 Standard, TS16949, EN Product Standards, Product safety requirement e.g. UL, CSA.
Familiar with Statistical QC tools & measurement methods, FMEA, MSA, SPC, etc.
Able to understand and interpret technical drawing and perform measurement with measuring equipment such as CMM, vision scope, profile projector, gear profile and hardness tester.
Hand on experience on failure analysis and problem solving methodology e.g. 5 Why’s, RCA, fault tree analysis etc.
Ability to apply in-depth knowledge of problem solving technique in solving Quality issues including risk assessment evaluation.
Effective communication skills with all levels within the organization, suppliers and customers.
Proficient in application of DOE, SPC, MSA, Process Capability and 8D.
Ability to manage personnel time to ensure completion of assignments.
Ability to work with minimum supervision and self-motivation.
Only Malaysian citizens are eligible to apply for this position.
Hirer responsiveness Salary match Number of applicants
Bosch has been present in Malaysia since 1923, represented by Robert Bosch Sdn Bhd. In Malaysia, Bosch is active in four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. The company has three manufacturing sites and research and development offices in Penang, producing automotive electronics, power tools and steering systems, and soon a fourth plant with a final testing centre for sensors and semiconductors. In 2020, Bosch Malaysia generated consolidated sales of RM 518.4 million (108.1 million euros), and currently employs more than 4,000 associates.
Robert Bosch Semiconductor Manufacturing Penang Sdn. Bhd. Plant is Bosch Group's newest expansion in Malaysia a semiconductor test site in Batu Kawan Penang. The construction has begun in May 2021 and first series of production to commence in 2023. With the long-term forecasts for growth of semiconductor component quantities, coupled with the front-end production in Bosch's Dresden facility in Germany, capacity expansion is required for the back-end production, which is the final testing phase of semiconductors and sensors. PgP5 will primarily focus on the final testing of components manufactured at Bosch Automotive Electronics' fab in Dresden, Germany. The plant will also house R&D and training facilities.
Bosch in Malaysia is a part of the Bosch Group, a leading global supplier of technology and services. The Bosch Group's strategic objective is to deliver innovations for a connected life. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is "Invented for life".
Bosch has been present in Malaysia since 1923, represented by Robert Bosch Sdn Bhd. In Malaysia, Bosch is active in four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. The company has three manufacturing sites and research and development offices in Penang, producing automotive electronics, power tools and steering systems, and soon a fourth plant with a final testing centre for sensors and semiconductors. In 2020, Bosch Malaysia generated consolidated sales of RM 518.4 million (108.1 million euros), and currently employs more than 4,000 associates.
Robert Bosch Semiconductor Manufacturing Penang Sdn. Bhd. Plant is Bosch Group's newest expansion in Malaysia a semiconductor test site in Batu Kawan Penang. The construction has begun in May 2021 and first series of production to commence in 2023. With the long-term forecasts for growth of semiconductor component quantities, coupled with the front-end production in Bosch's Dresden facility in Germany, capacity expansion is required for the back-end production, which is the final testing phase of semiconductors and sensors. PgP5 will primarily focus on the final testing of components manufactured at Bosch Automotive Electronics' fab in Dresden, Germany. The plant will also house R&D and training facilities.
Bosch in Malaysia is a part of the Bosch Group, a leading global supplier of technology and services. The Bosch Group's strategic objective is to deliver innovations for a connected life. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is "Invented for life".