Senior Software engineer- Embedded

Stryker

Gurugram District

On-site

INR 1,200,000 - 2,400,000

Full time

36 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Remote work options
Travel opportunities (10%)
World's Best Workplaces

Job summary

Stryker is seeking a Senior Software Engineer / Staff Engineer for the SFTC-PV group in India. You will design, develop, verify, and support embedded software for medical-device platforms, focusing on real-time constraints, safety, and reliability.

The role requires hands-on firmware in C/C++ for ARM MCUs and HW–SW integration, with cross-functional collaboration across hardware, cybersecurity, and regulatory teams.

Qualifications

  • 5–8 years of professional software development, including embedded-product development
  • Proficient in embedded C/C++ for ARM-based platforms
  • Experience with real-time embedded systems and safety‑critical development
  • Strong knowledge of hardware–software integration and device drivers
  • Familiar with serial protocols SPI/I2C/UART/CAN/USB
  • Awareness of IEC 62304 and related regulatory expectations
  • Ability to lead through influence in cross‑functional teams

Responsibilities

  • Develop and maintain embedded software for medical-device platforms
  • Collaborate with system lead on trade-offs across software design, controls, cybersecurity, and usability
  • Implement firmware and low-level software for ARM/FPGA platforms
  • Lead board bring-up, debugging, and HW–SW integration
  • Ensure code meets safety, reliability, and regulatory requirements

Skills

Embedded C/C++
RTOS
ARM microcontrollers
Device drivers
Hardware–software integration
SPI/I2C/UART/CAN/USB
Regulatory standards IEC 62304
System architecture
Git / CI/CD

Education

Bachelor's degree in CS/EE

Tools

Linux
MATLAB/Simulink
JTAG/SWD debugging

Job description

Work Flexibility: Onsite This role is for SFTC-PV for a Senior Software Engineer / Staff Engineer with 6+ years of experience in Embedded Systems. You will work on the architecture, design, development, integration, verification, and lifecycle support of embedded software for innovative medical-device platforms. You will solve complex, sub-system-level problems; establish reusable technical approaches; influence product and platform roadmaps; and collaborate with cross-functional teams in translating clinical, system, hardware, cybersecurity, and regulatory needs into sub-system-level requirements. This role combines deep hands-on expertise in real-time embedded development, low-level software, motor-control applications, hardware–software integration, and verification with broad collaboration with the software lead for an assigned project.

What you will do:
  • Provide hands-on technical execution for the design, development, integration, test, release, and maintenance of scalable embedded software for medical-device and electromechanical systems.
  • Collaborate with the system lead for subsystem-level trade-offs across embedded software design, controls, cybersecurity, usability, and product performance.
  • Work with software lead to implement embedded software modules, interfaces, reusable platforms, as per engineering standards across products.
  • Develop production-quality firmware and low-level software in C and C++ for ARM-based microcontrollers, microprocessors, and FPGA-enabled platforms.
  • Ensure developed code is as per engineering standard and tested for all requirements.
  • Implement closed-loop control solutions, including motor-control and PID algorithms, with deterministic hard real-time performance, safety, and reliability.
  • Lead development and debugging of board support packages, bootloaders, device drivers, hardware abstraction layers, middleware, and low-level communication interfaces.
  • Develop firmware/drivers on real-time operating systems, including scheduling, concurrency, memory management, inter-process communication, system performance, and reliability optimization.
  • Troubleshoot interfaces and protocols such as SPI, I2C, UART, CAN, USB, Ethernet, and other wired or wireless communications as applicable.
  • Champion object-oriented design, design patterns, modular architecture, coding standards, defensive programming, secure-software practices, and design for testability and maintainability.
  • Partner with electrical and systems engineers to review schematics, datasheets, timing diagrams, component specifications, board designs, failure modes, and hardware–software integration risks.
  • Lead board bring-up, performance characterization, and complex root-cause analysis using JTAG/SWD debuggers, oscilloscopes, logic analyzers, digital multimeters, protocol analyzers, and related laboratory tools.
  • Establish unit, integration, system, automated, hardware-in-the-loop, code-coverage, static-analysis, and regression-test strategies; ensure adequate evidence and traceability.
  • Resolve ambiguous or high-impact defects, field issues, performance limitations, cybersecurity concerns, and product risks.
  • Lead proofs of concept, technology assessments, component-obsolescence strategies, design simplification & cost improvements under product engineering projects, and engineering-process improvements.
  • Influence global, cross-functional teams and senior stakeholders without direct authority; communicate technical strategy, risks, decisions, and progress clearly and credibly.
Required Skills:
  • Bachelor’s degree in Computer Science, Software Engineering, Electrical Engineering, Electronics and Communication Engineering, or a related discipline.
  • 5-8 years of professional software development experience, including hands-on embedded-product development of complex or safety-critical systems.
  • Good programming skills in embedded C and C++, with a demonstrated record of delivering production-quality software under stringent resource, timing, safety, and reliability constraints.
  • Good experience with microcontroller and microprocessor architectures, real-time operating systems, device drivers, and hardware–software integration.
  • Good experience developing, integrating, and debugging hardware-dependent software using laboratory instruments, hardware debuggers, and disciplined root-cause analysis.
  • Knowledge of requirements engineering, software design, verification, risk management, configuration management, version control, defect management, and product lifecycle processes.
  • Proven ability to lead through influence, communicate with senior stakeholders, and collaborate in a global, cross-functional, matrixed environment.
  • Excellent analytical, problem-solving, technical writing, presentation, and verbal communication skills, with the ability to bring clarity to ambiguous and complex problems.
Preferred Skills:
  • Experience with Agile development, Git-based workflows, CI/CD platforms, automated builds, static analysis, unit-test frameworks, and requirements or application-lifecycle-management tools.
  • Experience with model-based design, MATLAB/Simulink, hardware-in-the-loop environments, formal methods, or automated test frameworks.
  • Experience in Linux, board support packages, bootloaders and device driver development.
  • Experience supporting the full product lifecycle, including new product development, sustaining engineering, product complaints, CAPA, obsolescence, production support, and post-market improvements.
  • Experience evaluating external technologies, suppliers, development partners, or acquired product architectures and integrating them into an enterprise product ecosystem.
  • Strong knowledge of medical-device software development and applicable standards, including IEC 62304, ISO 13485, ISO 14971, IEC 60601, and relevant FDA or international regulatory expectations.
  • Experience leading technical content for regulatory submissions, design assurance, risk management, cybersecurity assessments, or product safety activities.
Soft Skills
  • Ability to communicate technical information and present to project teams and stakeholders.
  • Occasional travel and flexibility to collaborate across global time zones may be required.

Travel Percentage: 10%

Stryker is one of the world’s leading medical technology companies and, together with its customers, is driven to make healthcare better. We offer innovative products and services in Orthopaedics, Medical and Surgical, and Neurotechnology and Spine that help improve patient and hospital outcomes. We are proud to be named one of the World’s Best Workplaces! For more information, visit: www.stryker.com

Work Flexibility
  • Remote – Role allows you to work the majority to 100% of time from an alternate workplace. These roles could have travel expectations, and you must work within the country of the job requisition location.
  • Field-based – You can expect to regularly work a majority to 100% of time at customer facilities and has a set territory or expectation to travel within a set boundary. Almost all sales roles would likely be qualified as field-based.
  • Onsite – Role is 100% located at a Stryker facility. Some ad hoc flexibility may be available depending on role, level, and job requirements. Manufacturing roles and any role that requires physical presence at the office would qualify under this category.
  • Hybrid – You can expect to regularly work in both an alternate workplace and a Stryker facility. Roles that are partially remote or co-located would qualify as hybrid, and the expectation to be onsite would be defined and agreed upon by your manager/supervisor.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Staff Engineer, Software
Senior Staff Engineer, Software

Stryker • Gurugram District

On-site
INR 480,000 - 720,000
Manager - Embedded Systems
Manager - Embedded Systems

Stryker • Gurugram District

Hybrid
INR 4,500,000 - 6,500,000
Senior Engineer - Embedded Product Security
Senior Engineer - Embedded Product Security

Stryker • Gurugram District

Hybrid
INR 1,500,000 - 2,100,000
Remote work
Hybrid work options
20% travel potential
Staff Engineer
Staff Engineer

Stryker • India

Hybrid
PHP 1,200,000 - 2,000,000
Staff Engineer
Staff Engineer

Stryker • Bengaluru

Hybrid
INR 2,500,000 - 3,800,000
Principal Engineer - Cloud Architect
Principal Engineer - Cloud Architect

Stryker • Gurugram District

Remote
INR 3,500,000 - 5,500,000
Staff Engineer
Staff Engineer

Stryker • Gurugram District

Hybrid
INR 2,500,000 - 4,000,000
Associate Service Engineer
Associate Service Engineer

Stryker India Private Limited • Chennai

Hybrid
INR 600,000 - 900,000
SDET Engineer(Python)
SDET Engineer(Python)

Stryker • Gurugram District

Hybrid
INR 2,800,000 - 4,200,000
Staff Engineer/ Senior Staff Engineer-Regulatory V&V
Staff Engineer/ Senior Staff Engineer-Regulatory V&V

Stryker • Gurugram District

Hybrid
INR 900,000 - 1,500,000