Principal Hardware Engineer - SSD Architecture and Development

Micron Technology Operations India Llp

Bengaluru

On-site

INR 5,000,000 - 9,000,000

Full time

10 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Micron Technology, Inc. in Bengaluru, India seeks a Principal Engineer for EDG SSD Hardware to lead end-to-end SSD hardware architecture, design, validation and productization.

You will own schematic design, high-speed interfaces, and integration of controllers, NAND and DRAM while driving AI-first engineering practices and automation. The role focuses on automotive and embedded form factors, ISO 26262 collaboration, and robust hardware solutions under demanding temperature ranges.

Responsibilities

  • SSD Hardware Architecture and Development
  • Lead end-to-end SSD hardware architecture, design, validation and productization
  • Own schematic design, component selection, PCB stack-up, placement, routing and design reviews
  • Define hardware requirements covering performance, power, thermal, reliability, form factor and manufacturability
  • Drive high-speed interface design and validation for PCIe, NVMe, ONFI, NAND and other relevant interfaces
  • Lead controller, NAND, DRAM, PMIC, clock, power-delivery and peripheral device integration
  • Develop hardware solutions for standard form factors, including M.2 and BGA, automotive and embedded form factors
  • Champion an AI-first engineering mindset across SSD hardware design, validation, debug, and product execution
  • Apply AI-assisted engineering tools to accelerate schematic reviews, BOM analysis, design-rule and DFM checks, requirements analysis, documentation, and data analysis
  • Develop and deploy Python-based automation and AI-assisted workflows for repetitive hardware engineering tasks
  • Leverage Generative AI and agentic workflows to capture engineering knowledge, lessons learned, design guidelines, and reusable debugging methodologies
  • Exposure to ASIL standards and translating automotive requirements into hardware design specifications
  • Design for extended automotive operating temperatures, reliability and compliance with AEC automotive standards
  • Own signal-integrity and power-integrity analysis for high-speed interfaces, NAND channels, clocks and power rails
  • Collaborate with systems, firmware and functional-safety teams to support ISO 26262
  • Demonstrated exposure to AI-assisted engineering tools and workflows, with a mindset toward AI-powered productivity

Job description

Principal Engineer, EDG SSD Hardware

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Key Responsibilities
  • SSD Hardware Architecture and Development
  • Lead end-to-end SSD hardware architecture, design, validation and productization.
  • Own schematic design, component selection, PCB stack-up, placement, routing and design reviews.
  • Define hardware requirements covering performance, power, thermal, reliability, form factor and manufacturability.
  • Drive high-speed interface design and validation for PCIe, NVMe, ONFI, NAND and other relevant interfaces .
  • Lead controller, NAND, DRAM, PMIC, clock, power-delivery and peripheral device integration.
  • Develop hardware solutions for standard form factors, including M.2 and BGA , as well as customer-specific automotive and embedded form factors.
  • Champion an AI-first engineering mindset across SSD hardware design, validation, debug, and product execution.
  • Apply AI-assisted engineering tools to accelerate schematic reviews, component/BOM analysis, design-rule and DFM checks, requirements analysis, technical documentation, and engineering data analysis.
  • Develop and deploy Python-based automation and AI-assisted workflows for repetitive hardware engineering tasks, including test-data processing, log analysis, validation reporting, failure triage, and design checks.
  • Leverage Generative AI and agentic workflows to capture engineering knowledge, lessons learned, design guidelines, failure history, and reusable debug methodologies.
Automotive Hardware Requirements
  • Exposure to ASIL standards.
  • Translate customer and system-level automotive requirements into hardware design and validation specifications.
  • Design for extended automotive operating temperatures, typically including −40°C to +85°C or +105°C , depending on the product and application requirements.
  • Ensure the design meets applicable automotive reliability expectations for: Temperature cycling and thermal shock High-temperature operating life Mechanical shock and vibration Humidity and moisture resistance Board-level solder-joint reliability Power cycling and extended mission-profile operation Support component qualification and product-level assessments aligned with applicable AEC-Q100, AEC-Q104 and AEC-Q200 expectations.
  • Apply appropriate design margins and derating guidelines for voltage, current, temperature and component lifetime.
  • Address automotive power-transient, brownout, reset, power-loss protection and startup/shutdown sequencing requirements.
  • Evaluate system-level EMC and ESD risks and support compliance testing against applicable automotive customer and regional requirements.
  • Support requirements related to long product lifecycles, component traceability, controlled BOMs, PCN management and obsolescence planning .
Functional Safety and System Robustness
  • Collaborate with systems, firmware and functional-safety teams to support product development aligned with ISO 26262 .
  • Contribute to hardware safety analysis, including: Hardware Failure Mode and Effects Analysis FMEDA inputs Diagnostic coverage assessment Single-point and latent-fault evaluation Safety mechanism definition and validation.
  • Familiarity with Automotive SPICE development and traceability expectations is preferred.
SI/PI, Thermal and Mechanical Engineering
  • Own signal-integrity and power-integrity analysis for high-speed interfaces, NAND channels, clocks and critical power rails.
  • Correlate pre-layout and post-layout simulations with laboratory measurements.
  • Optimize PCB stack-up, impedance control, return paths, via structures, power distribution and decoupling.
  • Partner with mechanical and thermal teams to evaluate heat spreading, thermal‑interface materials, airflow, enclosure constraints and junction‑temperature margins.
AI & Engineering Automation
  • Demonstrated exposure to AI‑assisted engineering tools and workflows , with a strong mindset toward adopting AI to improve engineering productivity and quality.
  • Ability to leverage tools such as Microsoft Copilot, Claude/Claude Code, or equivalent AI platforms for engineering analysis, documentation, scripting, automation, and technical problem‑solving.
  • Identify and implement opportunities to apply AI and automation across the hardware development lifecycle , including design reviews, PCB/DFM checks, validation, data analysis, debug, and reporting.
  • Champion an AI‑first and automation‑first engineering culture , developing reusable workflows and sharing best practices across the team.
About Micron Technology, Inc.

We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all . With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

To request assistance with the application process and/or for reasonable accommodations, please contact hrsupport_india@micron.com

Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards.

Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron.

Experience Level

Senior Level

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

STAFF ENGINEER, EDG SSD HARDWARE
STAFF ENGINEER, EDG SSD HARDWARE

Micron • Bengaluru

On-site
INR 4,000,000 - 7,000,000
Senior SSD Hardware Engineer
Senior SSD Hardware Engineer

Micron Technology Operations India Llp • Bengaluru

On-site
INR 3,000,000 - 6,000,000
Principal Engineer, EDG SSD Hardware
Principal Engineer, EDG SSD Hardware

Micron Technology, Inc. • Bengaluru

On-site
INR 3,000,000 - 6,000,000
Principal Engineer, EDG SSD Hardware
Principal Engineer, EDG SSD Hardware

1840 Micron Tech. OP India LLP • Bengaluru

On-site
INR 4,000,000 - 7,000,000
Senior/Staff Engineer, ESSD Firmware Developer
Senior/Staff Engineer, ESSD Firmware Developer

Micron Technology, Inc. • Bengaluru

On-site
INR 4,000,000 - 7,000,000
Principal Engineer, EDG SSD Hardware
Principal Engineer, EDG SSD Hardware

Micron • Bengaluru

On-site
INR 400,000 - 750,000
Principal Engineer, EDG SSD Hardware Bengaluru, Karnataka, India
Principal Engineer, EDG SSD Hardware Bengaluru, Karnataka, India

Micron Technology, Inc. • Bengaluru

Remote
INR 3,000,000 - 5,200,000
Staff Engineer Product Engineering
Staff Engineer Product Engineering

1840 Micron Tech. OP India LLP • Hyderabad

On-site
INR 900,000 - 1,500,000
Senior NAND Applications Engineer
Senior NAND Applications Engineer

Micron Technology, Inc. • Hyderabad

On-site
INR 1,500,000 - 2,100,000
Principal SSD Applications Engineer
Principal SSD Applications Engineer

Micron Technology, Inc. • Bengaluru

On-site
INR 2,000,000 - 3,200,000