Manager

Modison Metals Ltd.; Valsad District; Presencial; INR 600.000 - 900.000; Jornada completa

Descripción de la vacante

Modison Metals Ltd. in Gujarat seeks a Process Engineer to oversee powder preparation, blending, compaction, sintering, and secondary processing of silver-based powders (AgCdO, AgNi, AgSnO).

You will monitor process variables, ensure metallurgical quality, drive Lean Six Sigma initiatives, and ensure EHS compliance for cadmium-based lines, coordinating with QA labs for conductivity and porosity targets.

Formación

• Supervise precise wet/dry mixing, blending, and processing parameters for silver composite powders (AgCdO, AgNi, AgSnO).
• Manage powder compaction, pre-sintering, and high-temperature sintering cycles to achieve desired density and bonding.
• Oversee secondary operations such as re-pressing, extrusion, rolling, wire drawing, and stamping to maintain tight tolerances.
• Monitor critical process variables (temperature, atmosphere, pressure, dwell times) for repeatability and defect reduction.
• Collaborate with metallurgy and QA labs to verify parameters including electrical conductivity (IACS), tensile strength, microstructure, and porosity.
• Ensure strict adherence to safe chemical handling, emissions control, and environmental compliance for cadmium-based (AgCdO) lines.
• Drive Six Sigma/Kaizen to reduce scrap, improve material recovery, and optimize cycle times.

Responsabilidades

• Supervise precise wet/dry mixing, blending, processing parameters.
• Manage compaction, pre-sintering, and sintering cycles.
• Oversee secondary operations like rolling, wire drawing, stamping to maintain tolerances.
• Monitor temperatures, atmosphere, pressure, and dwell times for batch repeatability.
• Coordinate with QA labs for metallurgical measurements and quality targets.

Conocimientos

Powder prep

Blending control

Compaction

Sintering

Process optimization

Secondary processing

Quality control

EHS governance

Lean manufacturing

Six Sigma

Descripción del empleo

1. Powder Preparation & Blending Control: Supervise precise wet/dry mixing, blending, and chemical/mechanical processing parameters for silver composite powders (AgCdO, AgNi, and AgSnO).
2. Compaction & Sintering Process Optimization: Manage powder compaction (pressing), pre-sintering, and high-temperature sintering cycles to achieve desired density, hardness, and metallurgical bonding.
3. Secondary Processing & Thermomechanical Control: Oversee secondary operations such as re-pressing, extrusion, rolling, wire drawing, and stamping to maintain strict dimensional tolerances.
4. Parameter Monitoring & Traceability: Continuously monitor critical process variables (temperatures, atmosphere control, pressure, and sintering dwell times) to ensure batch-to-batch repeatability and defect reduction.
5. Quality & Metallurgical Compliance: Collaborate closely with metallurgy and QA labs to verify critical parameters including electrical conductivity (IACS), tensile strength, microstructure homogeneity, and porosity.
6. Hazardous Material & EHS Governance: Ensure strict adherence to safe chemical handling procedures, emission control, and environmental compliance, specifically for cadmium-based (AgCdO) processing lines.
7. Process Improvement & Lean Manufacturing: Drive Six Sigma/Kaizen methodologies to reduce process scrap, improve material recovery rates of precious metals, and optimize cycle times.