Electronic Systems Controls Technical Specialist

Cummins India Limited; Maharashtra; On-site; INR 1,800,000 - 2,400,000; Full time

Job summary

Cummins Inc. is seeking an experienced control systems engineer to tailor electronic controls for Cummins products.

You will decompose product requirements into functional requirements and design and tune controls for a range of customer applications, and configure and validate integrated hardware and software systems. The role requires strong knowledge of controls theory, hands-on calibration, and collaboration with cross-functional teams to ensure reliability, performance, and compliance

Qualifications

• Bachelor's degree in Engineering or STEM field required.
• Experience with genset controls and embedded systems.
• Strong problem-solving and documentation skills.
• Knowledge of automotive/engine control standards helpful.

Responsibilities

• Develop and validate open/closed loop control software for various genset applications.
• Lead cross-functional collaboration and review work for quality and reliability.
• Create and maintain design verification plans and test results.

Skills

Genset systems

Feedback control

Embedded C

Schematic reading

System engineering

DFMEA

PSHA

Six Sigma

Education

Bachelor's degree in Engineering or STEM

Tools

Modbus

CAN

Ethernet

MATLAB

HIL/MIL

Job description

Job Summary

This controls focused position tailors electronic control systems for Cummins products. People in these positions will decompose product requirements into functional requirements and design and tune controls that operate on Cummins’ products in a variety of customer applications. Additionally, there is responsibility to configure (tune), and complete comprehensive validation testing of the fully integrated hardware and software systems.

This controls focused position tailors electronic control systems for Cummins products. People in these positions will decompose product requirements into functional requirements and design and tune controls that operate on Cummins’ products in a variety of customer applications. Additionally, there is responsibility to configure (tune), and complete comprehensive validation testing of the fully integrated hardware and software systems.

Key Responsibilities

Contributes to the development of electronic controls (open and closed loop)and diagnostics for a variety of applications (internal combustion engine, power systems, powertrain, etc). Owns investigation, problem resolution, and documentation for these systems with guidance from more experienced team members. Uses strong knowledge of application of controls and first principles to guide decision making. Works and improves electronic controls development processes and tools. Processes include system specification, modeling and simulation, calibration, Design Verification Plan and Report (DVP&R), and troubleshooting. Application of tools for simulation, calibration, and product life maintenance required. Contributes to negotiations, translates and decomposes requirements and voices from customers into functional requirements for controls algorithms, designs algorithms to meet these requirements, tunes these algorithms, and designs tests to validate performance against these requirements. Contributes to decisions in the areas of electronic and electrical controls and diagnostic design, requirements, calibration, and test that impact the quality and performance of individual calibrated features and/or components by using systems knowledge and understanding of product (internal combustion engine, power systems, powertrain, etc). Responsible for review of less-experienced controls engineers' work to ensure robust, reusable, and efficient design. Contributes independent leadership of smaller business impact projects or ownership of complex components, products, systems or services with greater elements of ambiguity over the senior or lead engineer level and with full accountability to the project team. Coordinates and directs work amongst technicians and temporary student employees, assists in the transfer of knowledge to lesser experienced engineers through either indirect (scope of influence) or direct management of a small, local group of engineers. Responsible for interacting and collaborating with cross functional teams. Contributes as a recognized specialist in a discipline or product area within the immediate team. Leads the development and improvement of work processes and systems across a functional discipline area within a business unit site. Competencies: Design and Application of Mechatronics Systems - Specifies electronic hardware and interconnections that measure and control systems; applies electronic hardware and interconnections in Cummins' products. Design and Application of Open/Closed Loop Controls - Specifies software features that interact with mechanical, hydraulic, chemical and electronic systems to deliver desired system states; specifies control system architectures which include appropriate measurements, correct actuation, and algorithms for Cummins' products; configures and/or understands open/closed loop feedback controls features and the system interactions between hardware and software in Cummins' products. Machine Integration and Optimization - Combines various parts or sub-systems into a whole to achieve the output most desired by the customer; applies Cummins' installation requirements using our standard tools, processes and identified best practices to ensure optimization of performance, reliability, cost and quality; analyzes technical issues using proven problem-solving and troubleshooting techniques for rapid resolution. Product Failure Mode Avoidance - Mitigates potential product failure modes, by identifying interfaces, functions, functional requirements, interactions, control factors, noise factors, and prioritized potential failure modes and potential failure causes for the system of interest to effectively and efficiently improve the reliability of Cummins’ products. Product Function Modeling, Simulation and Analysis - Impacts product design decisions through the utilization and/or interpretation of computational tools and methods that predict the capability of a product's function relative to its system, sub-system and/or component level requirements. Product Problem Solving - Solves product problems using a process that protects the customer; determines the assignable cause; implements robust, data-based solutions; and identifies the systemic root causes and recommended actions to prevent problem reoccurrence. Product Verification and Validation Management - Develops product systems validation plans from a variety of inputs to identify failure modes, while managing product risk and relative priority; negotiates product requirements against capability to guide project scope; evaluates analytical, simulation and physical test results to verify product capability and validate requirements; assesses legacy versus proposed system solution capabilities and produces recommendations with technical documentation to support product decisions. System Requirements Engineering - Uses appropriate methods and tools to translate stakeholder needs into verifiable requirements to which designs are developed; establishes acceptance criteria for the system of interest through analysis, allocation and negotiation; tracks the status of requirements throughout the system lifecycle; assesses the impact of changes to system requirements on project scope, schedule, and resources; creates and maintains information linkages to related artifacts. Systems Thinking - Defines the system of interest by drawing the boundaries, identifying its context within its environment, its interfaces, and that it has a lifecycle to aid in planning the problem statement, scope and deliverables ; analyzes linkages and interactions between elements that comprise the system of interest by using appropriate methods, models and integration of outcomes to understand the system, predict its behavior and devise modifications to it in order to produce the desired effects. Technical Documentation - Documents information based on knowledge gained as part of technical function activities; communicates to stakeholders with the goal of enabling improved technical productivity and effective knowledge transfer to others who were not originally part of the initial learning. Builds networks - Effectively building formal and informal relationship networks inside and outside the organization. Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Decision quality - Making good and timely decisions that keep the organization moving forward. Drives results - Consistently achieving results, even under tough circumstances. Manages ambiguity - Operating effectively, even when things are not certain or the way forward is not clear. Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Cybersecurity

• Knowledge . cybersecurity regulations and standards applicable to embedded control systems
• Ability to derive, analyse, and manage cybersecurity requirements for controllers, HMIs, communication interfaces, and connected tools.
• Experience conducting threat analysis, risk assessments, cybersecurity gap analysis, and mitigation planning for embedded control systems.
• Skilled in product and process documentation to demonstrate compliance to cybersecurity norms.
• Understanding of cybersecurity concepts for embedded systems products, test plan creation and system level validation.
• Understanding of controller, HMI, engine ECM, telematics, and plant/network communication architectures , boundary diagrams and interfaces from a cybersecurity perspective.
• Ability to define cybersecurity work products, support audits/evaluations, and ensure compliance throughout the product lifecycle.
• Maintain SDLC for product - ensuring compliance to process, validation and release ( CRA, UL). Secure Product Development Lifecycle (Secure SDLC) and Regulatory Compliance.

System Engineering Skills

• Skilled in genset controllers system
• Electronics and Electrical power systems knowledge
• Electronic System - Harness, Sensor, Actuator, Switch gears, breakers, charging alternator
• Electronic Control Architecture - **microprocessor, *HW, SW, Service tool, HMI
• 3 phase power supply, synchronization, alternator.
• Genset Domain Knowledge - PLC, Paralleling,3rd Party Interfacing
• Feedback Control Loops/Theory (PG Programs)- AVR, Voltage Regulation, Speed Governing
• System engineering process flows and tools
• Requirement gathering
• System design and documentation (specifically in genset controls system)
• DFMEA
• PSHA (Product Safety & Hazard Analysis) and Product risk assessment
• 7 step problem solving tool
• Test plan creation and test execution (On Genset/Matlab based simulation system-HIL/MIL)
• Embedded C code understanding skill
• Hardware schematics readability
• Datalink domain Knowledge ISO 7-layer, *Modbus, CAN, *Ethernet, Basic knowledge of Network Topology
• Understanding of Fault Diagnostics
• Product development lifecycle- in general knowledge
• High level idea of Software calibration
• Six Sigma Tools and Methodology - RACI, SOW, PUGH Matrix, DOE

Job

Engineering

Organization

Cummins Inc.

Role Category

On-site with Flexibility

Job Type

Exempt - Experienced

ReqID

2436885

Relocation Package

Yes

100% On-Site

No

Education, Licenses, Certifications:College, university, or equivalent Bachelor's degree in Engineering or appropriate STEM field is required.

Post-graduate (Master's) degree relevant to this discipline area may be required for select roles.

This position may require licensing for compliance with export controls or sanctions regulations.

Experience:Prior Senior or Lead Engineer equivalent work experience in a relevant discipline area is required with a demonstrated track record of technical problem solving and quality decision making.

Knowledge of MS Office tools is preferred.