Quality Metrology Technician

Lisnabrin Engineering, Mitchelstown, Co.

Cork

On-site

EUR 42,000 - 52,000

Full time

25 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Productivity bonuses
Pension scheme
Sick pay scheme
Half Day Friday
Modern factory and facilities
Free car-parking
Convenient location
Minimal traffic
Low-stress commute
Educational assistance
Employee Assistance

Job summary

Lisnabrin Engineering in Mitchelstown, Co. Cork, seeks a Quality Metrology Technician.

You will inspect precision machined components, perform measurements with CMM and other metrology tools, and maintain detailed inspection records in line with ISO 9001:2015 and ISO 13485:2016 systems. Ideal candidates have 2+ years in quality inspection/metrology, GD&T knowledge, and the ability to read engineering drawings; medical device familiarity is a plus.

Qualifications

  • Minimum of 2 years’ experience in quality inspection or metrology.
  • Proficiency with manual and automated measuring equipment.
  • Knowledge of GD&T and reading engineering drawings.
  • Experience maintaining accurate inspection records, NCRs and certificates of conformance.
  • CMM programming experience would be advantageous.

Responsibilities

  • Carry out in-process, first article and final inspection of precision machined components.
  • Perform precision measurements using CMM, vision systems, height gauges, micrometers, calipers and pin gauges.
  • Read and interpret engineering drawings, specifications and GD&T requirements.
  • Complete accurate inspection reports, first article inspection reports and certificates of conformance.
  • Record and report measurement data, test results and any non-conformities identified, raising NCRs and quarantining non-conforming product.
  • Act as the quality point of contact for the evening production team, escalating issues and providing a handover to the day quality team.
  • Ensure measuring equipment is within calibration before use and work in line with health, safety and company procedures.

Skills

Quality inspection
Metrology
GD&T
Documentation
Teamwork

Education

Quality/Metrology/Engineering degree

Tools

CMM
Vision systems
Height gauges
Micrometers
Calipers
Pin gauges

Job description

Location: This role is based on the company premises in Mitchelstown, Co. Cork.
Duration: Permanent, Full Time / 39-hour week
Remuneration: Depending on Experience

Other benefits:

  • Productivity bonuses
  • Pension scheme
  • Sick pay scheme
  • Half Day Friday
  • Modern purpose-built factory and facilities
  • Free car-parking
  • Convenient location
  • Minimal traffic
  • Low-stress commute
  • Educational assistance
  • Employee Assistance
Job Summary:

The Quality Metrology Technician is responsible for the inspection and measurement of precision machined components, ensuring that all products meet customer specifications, drawing requirements and the requirements of our ISO 9001:2015 and ISO 13485:2016 certified quality management system.
The role involves in-process, first article and final inspection using a range of metrology equipment, together with maintaining accurate and detailed records of inspections, test results and any non-conformities identified.
Experience in a medical device or precision engineering environment is desirable; however, candidates with strong inspection experience and a willingness to develop additional skills are encouraged to apply.

Key Responsibilities:
  • Carry out in-process, first article and final inspection of precision machined components.
  • Perform precision measurements using a range of metrology equipment, including CMM, vision systems, height gauges, micrometers, calipers and pin gauges.
  • Read and interpret engineering drawings, specifications and GD&T requirements, working to current approved revisions.
  • Complete accurate and detailed inspection reports, first article inspection reports and certificates of conformance.
  • Record and report measurement data, test results and any non-conformities identified, raising NCRs and quarantining non-conforming product.
  • Act as the quality point of contact for the evening production team, escalating issues and providing a written handover to the day quality team.
  • Ensure measuring equipment is within calibration before use, and work in line with health, safety and company procedures.
The Ideal Candidate will have the following:

Preferred Qualifications

  • Third-level qualification (certificate, diploma or degree) in quality, metrology, engineering or a related discipline (or relevant industry experience).
  • Experience in a medical device or other regulated manufacturing environment.
  • CMM programming experience would be advantageous but is not essential.

Skills and Experience:

  • Minimum of 2 years’ experience in a quality inspection or metrology role within a precision engineering or manufacturing environment.
  • Proficiency in the use of manual and automated measuring and inspection equipment.
  • Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) and the ability to read and interpret engineering drawings.
  • Experience maintaining accurate inspection records and working within a quality management system.
  • Experience completing inspection reports, NCRs and certificates of conformance.
  • Good IT skills, including Microsoft Word and Excel.
  • Availability to work a rotating days/evening shift pattern would be an advantage. We still welcome your application if alternating shifts don’t suit.

Personal Attributes

  • Excellent attention to detail and accuracy in measurement and record-keeping.
  • Strong organisational skills with the ability to manage documentation and priorities effectively.
  • Reliable, self-motivated, and capable of working independently.
  • Good written and verbal communication and teamwork skills.
Accuracy and attention to detail are critical requirements for this role, as the quality and traceability of our products are of paramount importance.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Metrology Technician [Evening Shift]
Quality Metrology Technician [Evening Shift]

Lisnabrin Engineering, Mitchelstown, Co. • Cork

On-site
EUR 32,000 - 42,000
Productivity bonus
Pension scheme
Sick pay
+4
Quality Metrology Technician
Quality Metrology Technician

Ohshima Ireland Ltd • Shannon

On-site
EUR 35,000 - 50,000
Metrology Engineer
Metrology Engineer

Gi Group (United Kingdom) • Athlone

On-site
EUR 60,000 - 85,000
Quality Metrology Technician - Precision Inspection & GD&T
Quality Metrology Technician - Precision Inspection & GD&T

Lisnabrin Engineering, Mitchelstown, Co. • Cork

On-site
EUR 42,000 - 52,000
Productivity bonuses
Pension scheme
Sick pay scheme
+8
Quality Metrology Inspector
Quality Metrology Inspector

Ohshima Ireland Ltd • Shannon

On-site
EUR 40,000 - 59,000
Evening Metrology Technician - Precision Quality
Evening Metrology Technician - Precision Quality

Lisnabrin Engineering, Mitchelstown, Co. • Cork

On-site
EUR 32,000 - 42,000
Productivity bonus
Pension scheme
Sick pay
+4
Metrology Engineer
Metrology Engineer

PE Global (UK) • Sligo

On-site
EUR 52,000 - 75,000
Quality Engineer
Quality Engineer

HERO Recruitment Ltd. • Athlone

On-site
EUR 52,000 - 70,000
Health insurance after probation
Career development in medical device
Collaborative environment
+1
Metrology Engineer
Metrology Engineer

HERO Recruitment Ltd. • Athlone

On-site
EUR 55,000 - 75,000
Quality Control Technician
Quality Control Technician

MWeds Ltd • Cork

On-site
EUR 33,000 - 40,000
Top locations