ICT Technician

PT DBG Technology Indonesia

Batam

On-site

IDR 60,000,000 - 96,000,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

PT DBG Technology Indonesia seeks an ICT testing technician to operate, calibrate, and improve testing processes for PCBA production. You will work in a high‑intensity environment, ensuring 98% test coverage, and participate in program loading, fixture management, and defect analysis.

You will collaborate with Engineering, Production and Quality to debug, retest, and optimize fixtures and test programs for new models, while maintaining 5S and ESD standards on the line.

Qualifications

  • University graduate with 1–3 years in ICT or PCBA testing in electronics manufacturing.
  • ],
  • job_responsibilities_description [
  • ],
  • CoT_job_summary_short
  • COMPANY NAME: PT DBG Technology Indonesia
  • KEY POINTS: ICT testing, PCBA testing, SMT/DIP experience
  • job_summary_short
  • <p>PT DBG Technology Indonesia seeks an ICT testing technician to operate, calibrate, and improve testing processes for PCBA production. You will work in a high‑intensity environment, ensuring 98% test coverage, and participate in program loading, fixture management, and defect analysis.</p><p>You will collaborate with Engineering, Production and Quality to debug, retest, and optimize fixtures and test programs for new models, while maintaining 5S and ESD standards on the line.</p>
  • contract_type
  • fulltime
  • location_type
  • on site
  • remote_scope
  • null
  • perks
  • []
  • stated_min
  • null
  • stated_max
  • null
  • stated_absolute
  • null
  • salary_estimation_cot
  • ICT Technician in Batam, Indonesia: market rate around IDR 60–96 million gross annually.
  • estimated_low
  • 60000000
  • estimated_medium
  • 78000000
  • estimated_high
  • 96000000
  • currency
  • IDR
  • frequency
  • yearly
  • bonus
  • null
  • tax
  • gross
  • application_email
  • null
  • job_end_date
  • null
  • contact_person
  • null
  • hiring_department_name
  • null

Responsibilities

  • Operate ICT testing equipment and perform calibration, loading programs, and fixture management to stabilize test results.
  • Identify electrical defects, record yields, and report abnormalities for corrective action.
  • Strictly follow WI and achieve 98% test coverage and pass rates.
  • Troubleshoot defects with meters and scopes; distinguish hardware failures from testing errors.
  • Collaborate with Engineering, Production, and Quality to retest and optimize test programs.
  • Maintain 5S and ESD standards; train new operators; support safety procedures.

Skills

ICT testing
PCBA testing
Fault diagnosis
Data recording
Schematics reading

Education

Bachelor’s degree in electronics

Tools

Keysight equipment
Teradyne
TRI equipment
Multimeters
Oscilloscopes
LCR meters

Job description

Join an electronics manufacturing team responsible for operating, maintaining, and improving ICT testing processes for PCBA production. This role supports stable equipment performance, accurate defect detection, strong test coverage, and improved product quality in a high-intensity production environment. The position may involve rotating shifts or two-shift schedules.

Key responsibilities

Responsible for power-on/off operations, equipment inspection, calibration, and program loading of mainstream ICT testing machines such as Keysight, Teradyne, and TRI, ensuring stable equipment operation. Manage test fixtures, including installation, debugging, cleaning, and replacement of test fixtures, needle beds, and probes to reduce false test results and missed detections, and manage consumable inventory.

Strictly follow Work Instructions (WI) when conducting tests, ensuring test coverage and pass rates of at least 98%. Identify electrical defects such as open circuits, short circuits, and incorrect components. Accurately record yield rates and defect data, promptly report abnormalities, assist in analysis, and maintain program management records.

Perform initial assessments of defective products and distinguish hardware failures (such as cold solder joints, incorrect components, and reversed polarity) from testing errors. Use multimeters, oscilloscopes, and LCR meters to assist in fault identification. Work with Engineering, Production, and Quality departments to complete retesting, fault localization, and GR&R verification. Monitor defect trends and drive improvements.

Responsible for program debugging and calibration during production line machine setup and changeovers. Participate in the development, import, verification, and documentation of test programs for new models. Analyze defect data and provide fixture and program optimization recommendations to improve testing efficiency and product pass rates.

Maintain 5S standards and ESD protection in the testing area. Follow safety operating procedures, assist in training new employees in basic ICT operation skills, and comply with production line task assignments.

What we're looking for

University graduate with at least 1–3 years of experience in ICT or PCBA testing within an electronics manufacturing factory.

Experience in SMT testing is preferred; experience with DIP production lines, BMS or battery boards, or automotive-grade PCBA testing is an advantage.

Proficiency in operating ICT testing equipment and independently performing program debugging, calibration, machine changeovers, and daily inspections.

Proficiency in basic measurements using multimeters, LCR meters, and oscilloscopes; experience with signal generators or spectrum analysers is an advantage.

Ability to read PCB schematics and layout diagrams and troubleshoot PCBA defects, including open circuits, short circuits, incorrect components, and cold solder joints.

Proficiency in Microsoft Office applications, particularly Excel spreadsheets, formulas, and data statistics.

Strong attention to detail, sense of responsibility, and cross-departmental communication and collaboration skills.

Ability to record and report abnormal testing data accurately, adapt to production line pressure, and work rotating shifts or two-shift schedules.

Fresh graduates may be considered for selected positions, with training provided.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Advance Test Engineer
Advance Test Engineer

OSI Electronics • Batam

On-site
IDR 180,000,000 - 300,000,000
DIP Technician
DIP Technician

PT DBG Technology Indonesia • Batam

On-site
IDR 66,960,000 - 111,600,000
Advance Test Engineer
Advance Test Engineer

Pt Osi Electronics • Batam

On-site
IDR 120,000,000 - 180,000,000
ICT Test Technician: PCB/PCBA Quality & Calibration
ICT Test Technician: PCB/PCBA Quality & Calibration

PT DBG Technology Indonesia • Batam

On-site
IDR 60,000,000 - 96,000,000
Senior Electrical Test Engineer
Senior Electrical Test Engineer

Haemonetics • Kota Batu

On-site
IDR 536,241,000 - 804,361,000
Production Repair Technician – Electronics Manufacturing
Production Repair Technician – Electronics Manufacturing

PT Armitec Electrical Systems • Karawang

On-site
IDR 66,960,000 - 94,860,000
Test/Debug Technician
Test/Debug Technician

OSI Systems, Inc. • Tangerang

Hybrid
IDR 89,280,000 - 133,920,000
Test/Debug Technician
Test/Debug Technician

OSI Electronics, Inc. • Batam

Remote
IDR 60,000,000 - 100,000,000
Lead Test Engineer - ICT/FCT Automation & Yield Improvement
Lead Test Engineer - ICT/FCT Automation & Yield Improvement

Pt Osi Electronics • Batam

On-site
IDR 120,000,000 - 180,000,000
Smt Techncian
Smt Techncian

Pt Osi Electronics • Batam

On-site
IDR 100,000,000 - 180,000,000