Quality Control NDT Technician

Motorsport Network, LLC; Grove; On-site; GBP 42,000 - 54,000; Full time

Job summary

Williams F1 Team is seeking an experienced NDT Technician to perform multi‑method non‑destructive testing on race car components, assemblies and tooling. You will ensure safety, compliance, and fit for purpose using PT, MT, UT, RT and ET, delivering fast, traceable inspection results to support the build programme.

Essential: Level 2 NDT certification in at least two methods with ISO 9712/EN 4179/NAS 410. Desirable: Level 3 or progress towards it, plus motorsport or high‑performance engineering

Qualifications

• Essential: NDT certification to Level 2 (or equivalent) in at least two methods (PT, MT, UT, RT, ET) under ISO 9712 / EN 4179 / NAS 410.
• Desirable: Level 3 or clear route towards it.
• Experience in NDT or inspection role within motorsport, aerospace, defence or high‑performance engineering.

Responsibilities

• Carry out NDT using penetrant, magnetic particle, ultrasonic, radiographic and eddy current methods in line with procedures and certification.
• Inspect metallic components, welds, castings, forgings and assemblies for defects per drawings and customer/regulatory requirements.
• Interpret results, make accept/reject calls within authority, escalate issues promptly.
• Prioritise inspection workload against build/test schedule ensuring timely turnaround.
• Record results, reports and non-conformances with traceability; support close-out with Quality, Design and Manufacturing.
• Set up, calibrate, maintain and verify NDT equipment; keep calibration records current.
• Maintain safe working practices in line with radiation, chemical and magnetic safety requirements.
• Review and improve NDT techniques; adopt new methods/digital tools where value is added.
• Share knowledge with colleagues and apprentices to widen NDT capability across the department.
• Support NDT work for Race and Test team; international travel to races across the world during F1 season.

Skills

Multi-method NDT

Defect interpretation

Procedures & standards

Equipment & technique

Materials & manufacturing

Planning & communication

Education

NDT Level 2 Certification

Job description

Role Purpose (Job Profile):

Perform non-destructive testing (NDT) on race car components, assemblies and tooling to confirm they are safe, compliant and fit for purpose. Using penetrant, magnetic particle, ultrasonic, radiographic and eddy current methods, you will give the team fast, accurate and traceable inspection results that keep the build programme on schedule and protect the performance and safety of the car.

Main Duties:

• Carry out NDT using penetrant (PT), magnetic particle (MT), ultrasonic (UT), radiographic (RT) and eddy current (ET) methods, working to approved procedures and to the level of certification held.

• Inspect metallic and other components, welds, castings, forgings and assemblies for defects, in line with drawings, specifications and customer or regulatory requirements.

• Interpret results accurately, make clear accept or reject calls within your authority, and elevate anything outside it promptly.

• Prioritise and plan inspection workload against the build and test schedule, keeping turnaround times short without compromising quality.

• Record results, reports and non-conformances fully and traceably, and support close-out and corrective actions with Quality, Design and Manufacturing.

• Set up, calibrate, maintain and verify NDT equipment, consumables and reference standards, keeping all calibration and certification records current.

• Maintain safe working in line with radiation, chemical and magnetic safety requirements, including controlled areas, PPE and risk assessments.

• Review and improve NDT techniques and procedures, adopting new methods and digital tools where they add value.

• Share knowledge with colleagues and apprentices to widen NDT capability across the department.

• Support NDT work for Race and Test team as required. This role therefore requires some international travel to races across the world during F1 and testing season.

Key Accountabilities:

• Understand and work in line with Williams Values & Behaviours, encouraging others to do the same.

• Ensure understanding of and compliance with health and safety obligations.

• Maintain personal high standards of behaviour and conduct, being a positive ambassador for the department.

• Ensure you adhere to brand rules and maintain high standards of department presentation.

• Work to quality standards and identify and contribute ways to continuously improve department and personal performance.

• Ensure understanding of cost cap rules and requirements.

Core Competencies:

• Multi-method NDT: Proficient in PT and MT, with working knowledge and growing capability in UT, RT and ET, applying each method correctly to the part, material and defect type.

• Defect interpretation: Reads indications accurately, distinguishes relevant from non-relevant findings, and makes sound, defensible accept or reject decisions.

• Procedures and standards: Works to NDT procedures, drawings and specifications (for example ISO 9712 and EN 4179 or NAS 410), keeping precise, traceable records.

• Equipment and technique: Sets up, calibrates and verifies NDT equipment, and develops technique sheets and scan plans for complex geometries.

• Materials and manufacturing knowledge: Understands how metallic components are made, how defects arise and what they mean for performance.

• Planning and communication: Prioritises competing inspection demands, and communicates results and risks clearly to engineers and build teams.

Qualifications and Experience Level:

Essential: NDT certification to Level 2 (or equivalent employer-based certification) in at least two of PT, MT, UT, RT and ET, under a recognised scheme such as ISO 9712 or EN 4179 / NAS 410. Desirable: Level 3 or a clear route towards it. Experience in an NDT or inspection role within motorsport, aerospace, defence or high-performance engineering, with knowledge of metallic materials, welding and manufacturing processes. Equivalent practical experience will be considered in place of formal qualifications where certification can be achieved.

Success measures in first 12 months:

• Hold current certification in all methods required by the build programme, with signed-off authorisation to inspect independently within the agreed timeframe.

• Inspection turnaround meets the build schedule, with no build holds attributable to NDT capacity (AOP link to be confirmed).

• Inspection quality is right first time, with non-conformances recorded and closed out on time.

• NDT equipment, calibration and certification records are fully compliant and audit-ready.

• Skills shared with colleagues and apprentices, reducing reliance on a small number of certified individuals.

AI enablement:

Individual: uses digital inspection records, reporting and, where approved, AI-assisted tools such as automated defect recognition and measurement data analysis to improve speed and consistency. Function: contributes to digitising NDT data so recurring defects, trends and capacity needs are spotted earlier.

This job description is not exhaustive, and the job holder will be required to carry out from time-to-time tasks in addition to the above that will be both reasonable and within their capabilities.

Additional Information

Atlassian Williams F1 Team is an equal opportunity employer that values diversity and inclusion. We are happy to discuss reasonable job adjustments.