Plater Fabricator & Steel Fabricator (Temp to Perm & Perm Roles)

Fulcrum Engineering

Canvey Island

Vor Ort

GBP 28.000 - 42.000

Vollzeit

Vor 7 Tagen
Sei unter den ersten Bewerbenden

Eine vollständige Bewerbung in einer Minute

Maßgeschneiderter Lebenslauf und Anschreiben – versandbereit.

Schaffe es an den ATS-Filtern vorbei

Zusammenfassung

Fulcrum Engineering is seeking plater fabricators and steel fabricators for temp-to-perm and permanent positions in the Canvey area. Roles involve fabrication from engineering drawings, measuring up, cutting and drilling steel plates, angles and channels using Fab Shop machinery and a mix of MIG/TIG welding tasks.

Expect 40–50 hour weeks, with some early starts and occasional Saturday shifts. Opportunities to progress to permanent roles after 13 weeks, with competitive pay rates dependent on

Qualifikationen

  • Fabricate & weld from engineering drawings
  • Able to weld MIG/TIG with varying certs
  • Use Fab Shop machinery for fabrication tasks
  • Measure, mark up and cut steel plates and sections
  • Experience with plate, angle, box and channel sections

Aufgaben

  • Fabrication from drawings using Fab Shop machinery
  • Welding plate, angle, box and channels to length
  • MIG, TIG welding as required by job scope
  • Occasional site work as required by project need
  • Quality checks and accurate measurement on finished parts

Kenntnisse

Fabrication
Welding
MIG welding
TIG welding
Measuring & marking

Ausbildung

C&G Welding Fabrication
NVQ Welding Fabrication

Tools

CNC Drill
Boring
Saw Setter
Tube Bending Machine
Press Brake

Jobbeschreibung

Plater Fabricator & Steel Fabricator (Temp to Perm & Perm Roles)

Fulcrum Engineering & Technical are acting as a Employment Business on behalf of our Clients in the Canvey, Brentwood, Basildon areas.

We are recruiting personnel at all levels and covering similar Welding Fabrication roles depending on applicants skill sets & experience.

Working mainly in the Fab Shop plus pos some Site Work as required.

Fabricator - CNC Drill, Boring, Saw Setter Op.

Fabrication from engineering drawings, measuring & marking up Then cutting plate, angle, box, channel to length & drilling & boring holes & slots on steel.

Plater Fabricator & Steel Fabricator Working on the fabrication of steel plate, angle, box, channel from engineering drawings. Using Fab Shop Machinery.

Steel Welders & Fabricator Welders - Coded Spec MIG with Certs

Working on welding plate, steelwork & pos pipework. Some general fabrication & fitting work as required,

Steel Fabricator Welders will be more involved with fabrication work plus higher spec welding work with MIG mainly pos some MMA.

Sheet Metal Fabricator Welders & Welder Fabs working on the fabrication from engineering drawings & welding angle, box, tube to high spec finish. Welders TIG mainly working mainly on welding sheet metal 1.5 - 4 mm stainless or mild steel, ali, mild steel angle, box ideally able to weld pipe & tube with TIG or MIG.

Also semi skilled applicants can apply if they can cover most of the work depending on their skill set

Quals/Skills = Able to fabricate & weld with TIG mainly & some MIG depending on skills levels, or weld with MIG and some TIG

Ideally C & G or NVQ Welding Fabrication or Sheet Metalwork

Ideally - Use Tube Bending Machine & Press Brake & other Work Shop Machinery & Tools

Hours = 0730 to 1600 or 1730 40 to 50 hours Mon to Fri as required

Also 0600 or 0700 to 1330 Sat as required

Term = Temp to Perm 13 weeks with good chance of perm role after 13 full weeks

Perm = £17 + Hr £35,000 + p.a Basic May be some direct perm roles if the applicant is working and has to give notice

Pay Temp Contract = £22 + per Hr up to 40 hrs £27 + per Hr Overtime

£30 per Hr Sat Depending on Skills/Quals

Quals/Skills = Able to fabricate & weld with MIG depending on skills levels, or weld with MIG and some TIG Ideally weld with MMAFabrication of steel from engineering drawings. Measuring & marking up.Using Fab Shop CNC & Manual Machines.Ideally Weld Certs for MIG on steel plateIdeally C & G or NVQ Welding Fabrication or Sheet MetalworkIdeally MIG & MMA Weld Certs for Plate & PipeIdeally CSCS Card or Safety Passport

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Steel Fabricator Welder & Plater Welder (Temp to Perm Roles)
Steel Fabricator Welder & Plater Welder (Temp to Perm Roles)

Fulcrum Engineering • Basildon

Vor Ort
GBP 29.000 - 39.000
Fabricator MIG Steel Welder (Perm & Temp to Perm Roles)
Fabricator MIG Steel Welder (Perm & Temp to Perm Roles)

Fulcrum Engineering • Basildon

Vor Ort
GBP 32.000 - 39.000
Fabricator CNC Drill, Borer, Saw Setter Op (Temp to Perm & Perm Roles)
Fabricator CNC Drill, Borer, Saw Setter Op (Temp to Perm & Perm Roles)

Fulcrum Engineering • Canvey Island

Vor Ort
GBP 26.000 - 47.000
CSCS Card or Safety Passport
Safety-focused workplace
Fabricator MIG TIG Welder (Temp to Perm)
Fabricator MIG TIG Welder (Temp to Perm)

Fulcrum Engineering • Canvey Island

Vor Ort
GBP 29.000 - 39.000
Semi Skilled - Plater Fabricator & Steel Fabricator (Temp to Perm & Perm Roles)
Semi Skilled - Plater Fabricator & Steel Fabricator (Temp to Perm & Perm Roles)

Fulcrum Engineering • Canvey Island

Vor Ort
GBP 17.000 - 19.000
Welder Fab
Welder Fab

Fulcrum Engineering • Canvey Island

Vor Ort
GBP 26.000 - 34.000
CNC Drill, Borer, Saw, Plasma Setter Op - Fabricator (Temp to Perm & Perm Roles)
CNC Drill, Borer, Saw, Plasma Setter Op - Fabricator (Temp to Perm & Perm Roles)

Fulcrum Engineering • Canvey Island

Vor Ort
GBP 26.000 - 47.000
Steel Fabricator Welder & Plater Welder (Perm & Temp to Perm Roles)
Steel Fabricator Welder & Plater Welder (Perm & Temp to Perm Roles)

Fulcrum Engineering • Basildon

Vor Ort
GBP 29.000 - 39.000
MIG Welder & Semi Skilled - Trainee (Temp to Perm Roles)
MIG Welder & Semi Skilled - Trainee (Temp to Perm Roles)

Fulcrum Engineering • Basildon

Vor Ort
GBP 29.000 - 35.000
Semi Skilled Fabricators & CNC Ops (Temp to Perm)
Semi Skilled Fabricators & CNC Ops (Temp to Perm)

Fulcrum Engineering • Canvey Island

Vor Ort
GBP 18.000 - 28.000