Metallic Machinist (Turner) - Weekends

Formula Careers

Wantage

On-site

GBP 40,000 - 60,000

Full time

13 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Williams F1 Team in Wantage is seeking an experienced machinist to produce high-precision components in a fast-paced prototype environment. You will perform manual and CNC machining, set up Fanuc lathe/Turn-Mill tools, and ensure first-off parts meet strict quality standards.

Collaboration with TPP and shop colleagues is essential to optimize lead times and overall production efficiency. The role emphasizes data recording, accurate handovers, and ongoing suggestions for process improvements

Qualifications

  • Good level of knowledge manufacturing metallic and non-metallic components from aircraft grade metallic and high-quality engineering plastics.
  • Strong knowledge of setting and operating Fanuc controlled Lathes/Turn-Mill machine tools.
  • Possess a recognised apprenticeship or have gained relevant experience (minimum 5 years) in a precision engineering environment (preferably F1).

Responsibilities

  • To ensure components are produced in the most efficient, cost-effective way whilst keeping lead-times to a minimum.
  • Where appropriate, communicate and collaborate with TPP when solving problems machining first-off components and/or offer solutions that may further improve the quality or runtime of the job.
  • To proactively liaise with fellow machinists within the Machine Shop and other areas within the business to ensure best practice is established and utilised.
  • Carry out all possible inspection during the machining of any first off components, establish that a first off is correct and ensure that the remainder of the batch meets the same standard.
  • Ensure that all relevant shop floor data is collected and is accurately recorded using Data Collection Software when required.
  • Ensure communication to other shifts is thorough and accurate so that a smooth handover results in minimum loss in production time using written and verbal communication as necessary.
  • All information pertaining to the running of the job must be clearly and accurately recorded to ensure the smooth running of future demand using the preferred handover notebook.
  • Communicate ideas and suggestions regarding more efficient / effective production to the Supervisor/Team Leader.
  • Maintain personal high standards of behaviour and conduct, being a positive ambassador for the department.
  • Understand and work in line with Williams Values & Behaviours, encouraging others to do the same.
  • Ensure understanding of and compliance with health and safety obligations.
  • Maintain high standards of department presentation and quality.
  • Work to quality standards and identify and contribute ways to continuously improve department and personal performance.
  • Understand cost cap rules and requirements.

Skills

Manual programming
Multi-machine operation
CNC & manual machining

Education

Apprenticeship or equivalent experience

Tools

Fanuc lathe/Turn-Mill

Job description

Main Duties:
  • To ensure components are produced in the most efficient, cost-effective way whilst keeping lead-times to a minimum.
  • Where appropriate, communicate and collaborate with TPP (Toolpath Programming) when solving problems machining first-off components and/or offer solutions that may further improve the quality or runtime of the job.
  • To proactively liaise with both fellow machinists within the Machine Shop and other areas within the business to ensure best practice is established and utilised.
  • Carry out all possible inspection during the machining of any first off components, establish that a first off is correct and ensure that the remainder of the batch meets the same standard.
  • Ensure that all relevant shop floor data is collected and is accurately recorded using Data Collection Software when required.
  • Ensure communication to other shifts is thorough and accurate so that a smooth handover results in minimum loss in production time using written and verbal communication as necessary.
  • All information pertaining to the running of the job must be clearly and accurately recorded to ensure the smooth running of future demand using the preferred handover notebook.
  • Communicate ideas and suggestions regarding more efficient / effective production to the Supervisor/Team Leader.
Key Accountabilities:

Fulfil all organisational expectations, including but not limited to the following:

  • Understand and work in line with Williams Values & Behaviours, encouraging others to do the same.
  • Ensure understanding of and compliance with health and safety obligations.
  • Maintain personal high standards of behaviour and conduct, being a positive ambassador for the department.
  • Ensure you adhere to brand rules and maintain high standards of department presentation.
  • Work to quality standards and identify and contribute ways to continuously improve department and personal performance.
  • Ensure understanding of cost cap rules and requirements.
Core Competencies:
  • The ability to program manually and/or conversationally would be advantageous.
  • The need to run multiple machines and plan-ahead is regularly required.
  • Be able to demonstrate a good depth of machining knowledge, both CNC and manual, in a low volume, high accuracy, fast paced prototype environment.
Qualifications and Experience Level:
  • Good level of knowledge manufacturing metallic and non-metallic components from aircraft grade metallic and high-quality engineering plastics.
  • A strong knowledge of setting and operating Fanuc controlled Lathes/Turn-Mill machine tools.
  • Possess a recognised apprenticeship or have gained relevant experience (minimum 5 years) in a precision engineering environment (preferably F1).

Company Description

To produce high quality components in a time effective manner to meet the demands required to support the development and production for the formula one race car and external customers.


Additional Information

Atlassian Williams F1 Team is an equal opportunity employer that values diversity and inclusion. We are happy to discuss reasonable job adjustments.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Metallic Machinist (Turner) - Weekends
Metallic Machinist (Turner) - Weekends

Atlassian Williams F1 Team • Wantage

On-site
GBP 36,000 - 52,000
Metallic Machinist (Turner) - Weekends
Metallic Machinist (Turner) - Weekends

Williams Racing • Wantage

On-site
GBP 40,000 - 55,000
Metallic Machinist (Turner) - Weekends
Metallic Machinist (Turner) - Weekends

Motorsport Network, LLC • Vale of White Horse

On-site
GBP 45,000 - 55,000
Metallic Machinist (Turner) - Weekends
Metallic Machinist (Turner) - Weekends

Motorsport Network, LLC • Wantage

On-site
GBP 35,000 - 52,000
Machinist - Machine Shop - Weekends
Machinist - Machine Shop - Weekends

Motorsport Network, LLC • Vale of White Horse

On-site
GBP 40,000 - 58,000
Machinist - Machine Shop - Weekends
Machinist - Machine Shop - Weekends

Williams Racing • Wantage

On-site
GBP 42,000 - 62,000
Machinist - Machine Shop - Weekends
Machinist - Machine Shop - Weekends

Atlassian Williams F1 Team • Wantage

On-site
GBP 42,000 - 64,000
Machinist - Machine Shop - Weekends
Machinist - Machine Shop - Weekends

Formula Careers • Wantage

On-site
GBP 42,000 - 55,000
Machinist - Machine Shop - Weekends
Machinist - Machine Shop - Weekends

Williams Racing • Grove

On-site
GBP 40,000 - 65,000
Metallic Machinist (Turner) - Weekends
Metallic Machinist (Turner) - Weekends

Paddock • Grove

On-site
GBP 25,000 - 39,000